1041 lines
24 KiB
C
1041 lines
24 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
/* Copyright (c) 2018, The Linux Foundation. All rights reserved.
|
||
|
*
|
||
|
* Inspired by dwc3-of-simple.c
|
||
|
*/
|
||
|
|
||
|
#include <linux/acpi.h>
|
||
|
#include <linux/io.h>
|
||
|
#include <linux/of.h>
|
||
|
#include <linux/clk.h>
|
||
|
#include <linux/irq.h>
|
||
|
#include <linux/of_clk.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/extcon.h>
|
||
|
#include <linux/interconnect.h>
|
||
|
#include <linux/of_platform.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
#include <linux/phy/phy.h>
|
||
|
#include <linux/usb/of.h>
|
||
|
#include <linux/reset.h>
|
||
|
#include <linux/iopoll.h>
|
||
|
|
||
|
#include "core.h"
|
||
|
|
||
|
/* USB QSCRATCH Hardware registers */
|
||
|
#define QSCRATCH_HS_PHY_CTRL 0x10
|
||
|
#define UTMI_OTG_VBUS_VALID BIT(20)
|
||
|
#define SW_SESSVLD_SEL BIT(28)
|
||
|
|
||
|
#define QSCRATCH_SS_PHY_CTRL 0x30
|
||
|
#define LANE0_PWR_PRESENT BIT(24)
|
||
|
|
||
|
#define QSCRATCH_GENERAL_CFG 0x08
|
||
|
#define PIPE_UTMI_CLK_SEL BIT(0)
|
||
|
#define PIPE3_PHYSTATUS_SW BIT(3)
|
||
|
#define PIPE_UTMI_CLK_DIS BIT(8)
|
||
|
|
||
|
#define PWR_EVNT_IRQ_STAT_REG 0x58
|
||
|
#define PWR_EVNT_LPM_IN_L2_MASK BIT(4)
|
||
|
#define PWR_EVNT_LPM_OUT_L2_MASK BIT(5)
|
||
|
|
||
|
#define SDM845_QSCRATCH_BASE_OFFSET 0xf8800
|
||
|
#define SDM845_QSCRATCH_SIZE 0x400
|
||
|
#define SDM845_DWC3_CORE_SIZE 0xcd00
|
||
|
|
||
|
/* Interconnect path bandwidths in MBps */
|
||
|
#define USB_MEMORY_AVG_HS_BW MBps_to_icc(240)
|
||
|
#define USB_MEMORY_PEAK_HS_BW MBps_to_icc(700)
|
||
|
#define USB_MEMORY_AVG_SS_BW MBps_to_icc(1000)
|
||
|
#define USB_MEMORY_PEAK_SS_BW MBps_to_icc(2500)
|
||
|
#define APPS_USB_AVG_BW 0
|
||
|
#define APPS_USB_PEAK_BW MBps_to_icc(40)
|
||
|
|
||
|
struct dwc3_acpi_pdata {
|
||
|
u32 qscratch_base_offset;
|
||
|
u32 qscratch_base_size;
|
||
|
u32 dwc3_core_base_size;
|
||
|
int hs_phy_irq_index;
|
||
|
int dp_hs_phy_irq_index;
|
||
|
int dm_hs_phy_irq_index;
|
||
|
int ss_phy_irq_index;
|
||
|
bool is_urs;
|
||
|
};
|
||
|
|
||
|
struct dwc3_qcom {
|
||
|
struct device *dev;
|
||
|
void __iomem *qscratch_base;
|
||
|
struct platform_device *dwc3;
|
||
|
struct platform_device *urs_usb;
|
||
|
struct clk **clks;
|
||
|
int num_clocks;
|
||
|
struct reset_control *resets;
|
||
|
|
||
|
int hs_phy_irq;
|
||
|
int dp_hs_phy_irq;
|
||
|
int dm_hs_phy_irq;
|
||
|
int ss_phy_irq;
|
||
|
|
||
|
struct extcon_dev *edev;
|
||
|
struct extcon_dev *host_edev;
|
||
|
struct notifier_block vbus_nb;
|
||
|
struct notifier_block host_nb;
|
||
|
|
||
|
const struct dwc3_acpi_pdata *acpi_pdata;
|
||
|
|
||
|
enum usb_dr_mode mode;
|
||
|
bool is_suspended;
|
||
|
bool pm_suspended;
|
||
|
struct icc_path *icc_path_ddr;
|
||
|
struct icc_path *icc_path_apps;
|
||
|
};
|
||
|
|
||
|
static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
|
||
|
{
|
||
|
u32 reg;
|
||
|
|
||
|
reg = readl(base + offset);
|
||
|
reg |= val;
|
||
|
writel(reg, base + offset);
|
||
|
|
||
|
/* ensure that above write is through */
|
||
|
readl(base + offset);
|
||
|
}
|
||
|
|
||
|
static inline void dwc3_qcom_clrbits(void __iomem *base, u32 offset, u32 val)
|
||
|
{
|
||
|
u32 reg;
|
||
|
|
||
|
reg = readl(base + offset);
|
||
|
reg &= ~val;
|
||
|
writel(reg, base + offset);
|
||
|
|
||
|
/* ensure that above write is through */
|
||
|
readl(base + offset);
|
||
|
}
|
||
|
|
||
|
static void dwc3_qcom_vbus_override_enable(struct dwc3_qcom *qcom, bool enable)
|
||
|
{
|
||
|
if (enable) {
|
||
|
dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL,
|
||
|
LANE0_PWR_PRESENT);
|
||
|
dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL,
|
||
|
UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL);
|
||
|
} else {
|
||
|
dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL,
|
||
|
LANE0_PWR_PRESENT);
|
||
|
dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL,
|
||
|
UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int dwc3_qcom_vbus_notifier(struct notifier_block *nb,
|
||
|
unsigned long event, void *ptr)
|
||
|
{
|
||
|
struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, vbus_nb);
|
||
|
|
||
|
/* enable vbus override for device mode */
|
||
|
dwc3_qcom_vbus_override_enable(qcom, event);
|
||
|
qcom->mode = event ? USB_DR_MODE_PERIPHERAL : USB_DR_MODE_HOST;
|
||
|
|
||
|
return NOTIFY_DONE;
|
||
|
}
|
||
|
|
||
|
static int dwc3_qcom_host_notifier(struct notifier_block *nb,
|
||
|
unsigned long event, void *ptr)
|
||
|
{
|
||
|
struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, host_nb);
|
||
|
|
||
|
/* disable vbus override in host mode */
|
||
|
dwc3_qcom_vbus_override_enable(qcom, !event);
|
||
|
qcom->mode = event ? USB_DR_MODE_HOST : USB_DR_MODE_PERIPHERAL;
|
||
|
|
||
|
return NOTIFY_DONE;
|
||
|
}
|
||
|
|
||
|
static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom)
|
||
|
{
|
||
|
struct device *dev = qcom->dev;
|
||
|
struct extcon_dev *host_edev;
|
||
|
int ret;
|
||
|
|
||
|
if (!of_property_read_bool(dev->of_node, "extcon"))
|
||
|
return 0;
|
||
|
|
||
|
qcom->edev = extcon_get_edev_by_phandle(dev, 0);
|
||
|
if (IS_ERR(qcom->edev))
|
||
|
return PTR_ERR(qcom->edev);
|
||
|
|
||
|
qcom->vbus_nb.notifier_call = dwc3_qcom_vbus_notifier;
|
||
|
|
||
|
qcom->host_edev = extcon_get_edev_by_phandle(dev, 1);
|
||
|
if (IS_ERR(qcom->host_edev))
|
||
|
qcom->host_edev = NULL;
|
||
|
|
||
|
ret = devm_extcon_register_notifier(dev, qcom->edev, EXTCON_USB,
|
||
|
&qcom->vbus_nb);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev, "VBUS notifier register failed\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
if (qcom->host_edev)
|
||
|
host_edev = qcom->host_edev;
|
||
|
else
|
||
|
host_edev = qcom->edev;
|
||
|
|
||
|
qcom->host_nb.notifier_call = dwc3_qcom_host_notifier;
|
||
|
ret = devm_extcon_register_notifier(dev, host_edev, EXTCON_USB_HOST,
|
||
|
&qcom->host_nb);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev, "Host notifier register failed\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/* Update initial VBUS override based on extcon state */
|
||
|
if (extcon_get_state(qcom->edev, EXTCON_USB) ||
|
||
|
!extcon_get_state(host_edev, EXTCON_USB_HOST))
|
||
|
dwc3_qcom_vbus_notifier(&qcom->vbus_nb, true, qcom->edev);
|
||
|
else
|
||
|
dwc3_qcom_vbus_notifier(&qcom->vbus_nb, false, qcom->edev);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int dwc3_qcom_interconnect_enable(struct dwc3_qcom *qcom)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = icc_enable(qcom->icc_path_ddr);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = icc_enable(qcom->icc_path_apps);
|
||
|
if (ret)
|
||
|
icc_disable(qcom->icc_path_ddr);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int dwc3_qcom_interconnect_disable(struct dwc3_qcom *qcom)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = icc_disable(qcom->icc_path_ddr);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = icc_disable(qcom->icc_path_apps);
|
||
|
if (ret)
|
||
|
icc_enable(qcom->icc_path_ddr);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* dwc3_qcom_interconnect_init() - Get interconnect path handles
|
||
|
* and set bandwidth.
|
||
|
* @qcom: Pointer to the concerned usb core.
|
||
|
*
|
||
|
*/
|
||
|
static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
|
||
|
{
|
||
|
struct device *dev = qcom->dev;
|
||
|
int ret;
|
||
|
|
||
|
if (has_acpi_companion(dev))
|
||
|
return 0;
|
||
|
|
||
|
qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr");
|
||
|
if (IS_ERR(qcom->icc_path_ddr)) {
|
||
|
dev_err(dev, "failed to get usb-ddr path: %ld\n",
|
||
|
PTR_ERR(qcom->icc_path_ddr));
|
||
|
return PTR_ERR(qcom->icc_path_ddr);
|
||
|
}
|
||
|
|
||
|
qcom->icc_path_apps = of_icc_get(dev, "apps-usb");
|
||
|
if (IS_ERR(qcom->icc_path_apps)) {
|
||
|
dev_err(dev, "failed to get apps-usb path: %ld\n",
|
||
|
PTR_ERR(qcom->icc_path_apps));
|
||
|
ret = PTR_ERR(qcom->icc_path_apps);
|
||
|
goto put_path_ddr;
|
||
|
}
|
||
|
|
||
|
if (usb_get_maximum_speed(&qcom->dwc3->dev) >= USB_SPEED_SUPER ||
|
||
|
usb_get_maximum_speed(&qcom->dwc3->dev) == USB_SPEED_UNKNOWN)
|
||
|
ret = icc_set_bw(qcom->icc_path_ddr,
|
||
|
USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW);
|
||
|
else
|
||
|
ret = icc_set_bw(qcom->icc_path_ddr,
|
||
|
USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW);
|
||
|
|
||
|
if (ret) {
|
||
|
dev_err(dev, "failed to set bandwidth for usb-ddr path: %d\n", ret);
|
||
|
goto put_path_apps;
|
||
|
}
|
||
|
|
||
|
ret = icc_set_bw(qcom->icc_path_apps,
|
||
|
APPS_USB_AVG_BW, APPS_USB_PEAK_BW);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "failed to set bandwidth for apps-usb path: %d\n", ret);
|
||
|
goto put_path_apps;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
put_path_apps:
|
||
|
icc_put(qcom->icc_path_apps);
|
||
|
put_path_ddr:
|
||
|
icc_put(qcom->icc_path_ddr);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* dwc3_qcom_interconnect_exit() - Release interconnect path handles
|
||
|
* @qcom: Pointer to the concerned usb core.
|
||
|
*
|
||
|
* This function is used to release interconnect path handle.
|
||
|
*/
|
||
|
static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
|
||
|
{
|
||
|
icc_put(qcom->icc_path_ddr);
|
||
|
icc_put(qcom->icc_path_apps);
|
||
|
}
|
||
|
|
||
|
/* Only usable in contexts where the role can not change. */
|
||
|
static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom)
|
||
|
{
|
||
|
struct dwc3 *dwc;
|
||
|
|
||
|
/*
|
||
|
* FIXME: Fix this layering violation.
|
||
|
*/
|
||
|
dwc = platform_get_drvdata(qcom->dwc3);
|
||
|
|
||
|
/* Core driver may not have probed yet. */
|
||
|
if (!dwc)
|
||
|
return false;
|
||
|
|
||
|
return dwc->xhci;
|
||
|
}
|
||
|
|
||
|
static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
|
||
|
{
|
||
|
if (qcom->hs_phy_irq) {
|
||
|
disable_irq_wake(qcom->hs_phy_irq);
|
||
|
disable_irq_nosync(qcom->hs_phy_irq);
|
||
|
}
|
||
|
|
||
|
if (qcom->dp_hs_phy_irq) {
|
||
|
disable_irq_wake(qcom->dp_hs_phy_irq);
|
||
|
disable_irq_nosync(qcom->dp_hs_phy_irq);
|
||
|
}
|
||
|
|
||
|
if (qcom->dm_hs_phy_irq) {
|
||
|
disable_irq_wake(qcom->dm_hs_phy_irq);
|
||
|
disable_irq_nosync(qcom->dm_hs_phy_irq);
|
||
|
}
|
||
|
|
||
|
if (qcom->ss_phy_irq) {
|
||
|
disable_irq_wake(qcom->ss_phy_irq);
|
||
|
disable_irq_nosync(qcom->ss_phy_irq);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
|
||
|
{
|
||
|
if (qcom->hs_phy_irq) {
|
||
|
enable_irq(qcom->hs_phy_irq);
|
||
|
enable_irq_wake(qcom->hs_phy_irq);
|
||
|
}
|
||
|
|
||
|
if (qcom->dp_hs_phy_irq) {
|
||
|
enable_irq(qcom->dp_hs_phy_irq);
|
||
|
enable_irq_wake(qcom->dp_hs_phy_irq);
|
||
|
}
|
||
|
|
||
|
if (qcom->dm_hs_phy_irq) {
|
||
|
enable_irq(qcom->dm_hs_phy_irq);
|
||
|
enable_irq_wake(qcom->dm_hs_phy_irq);
|
||
|
}
|
||
|
|
||
|
if (qcom->ss_phy_irq) {
|
||
|
enable_irq(qcom->ss_phy_irq);
|
||
|
enable_irq_wake(qcom->ss_phy_irq);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
|
||
|
{
|
||
|
u32 val;
|
||
|
int i, ret;
|
||
|
|
||
|
if (qcom->is_suspended)
|
||
|
return 0;
|
||
|
|
||
|
val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
|
||
|
if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
|
||
|
dev_err(qcom->dev, "HS-PHY not in L2\n");
|
||
|
|
||
|
for (i = qcom->num_clocks - 1; i >= 0; i--)
|
||
|
clk_disable_unprepare(qcom->clks[i]);
|
||
|
|
||
|
ret = dwc3_qcom_interconnect_disable(qcom);
|
||
|
if (ret)
|
||
|
dev_warn(qcom->dev, "failed to disable interconnect: %d\n", ret);
|
||
|
|
||
|
if (device_may_wakeup(qcom->dev))
|
||
|
dwc3_qcom_enable_interrupts(qcom);
|
||
|
|
||
|
qcom->is_suspended = true;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
|
||
|
{
|
||
|
int ret;
|
||
|
int i;
|
||
|
|
||
|
if (!qcom->is_suspended)
|
||
|
return 0;
|
||
|
|
||
|
if (device_may_wakeup(qcom->dev))
|
||
|
dwc3_qcom_disable_interrupts(qcom);
|
||
|
|
||
|
for (i = 0; i < qcom->num_clocks; i++) {
|
||
|
ret = clk_prepare_enable(qcom->clks[i]);
|
||
|
if (ret < 0) {
|
||
|
while (--i >= 0)
|
||
|
clk_disable_unprepare(qcom->clks[i]);
|
||
|
return ret;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
ret = dwc3_qcom_interconnect_enable(qcom);
|
||
|
if (ret)
|
||
|
dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
|
||
|
|
||
|
/* Clear existing events from PHY related to L2 in/out */
|
||
|
dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
|
||
|
PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
|
||
|
|
||
|
qcom->is_suspended = false;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static irqreturn_t qcom_dwc3_resume_irq(int irq, void *data)
|
||
|
{
|
||
|
struct dwc3_qcom *qcom = data;
|
||
|
struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
|
||
|
|
||
|
/* If pm_suspended then let pm_resume take care of resuming h/w */
|
||
|
if (qcom->pm_suspended)
|
||
|
return IRQ_HANDLED;
|
||
|
|
||
|
/*
|
||
|
* This is safe as role switching is done from a freezable workqueue
|
||
|
* and the wakeup interrupts are disabled as part of resume.
|
||
|
*/
|
||
|
if (dwc3_qcom_is_host(qcom))
|
||
|
pm_runtime_resume(&dwc->xhci->dev);
|
||
|
|
||
|
return IRQ_HANDLED;
|
||
|
}
|
||
|
|
||
|
static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom)
|
||
|
{
|
||
|
/* Configure dwc3 to use UTMI clock as PIPE clock not present */
|
||
|
dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
|
||
|
PIPE_UTMI_CLK_DIS);
|
||
|
|
||
|
usleep_range(100, 1000);
|
||
|
|
||
|
dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
|
||
|
PIPE_UTMI_CLK_SEL | PIPE3_PHYSTATUS_SW);
|
||
|
|
||
|
usleep_range(100, 1000);
|
||
|
|
||
|
dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
|
||
|
PIPE_UTMI_CLK_DIS);
|
||
|
}
|
||
|
|
||
|
static int dwc3_qcom_get_irq(struct platform_device *pdev,
|
||
|
const char *name, int num)
|
||
|
{
|
||
|
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
|
||
|
struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb : pdev;
|
||
|
struct device_node *np = pdev->dev.of_node;
|
||
|
int ret;
|
||
|
|
||
|
if (np)
|
||
|
ret = platform_get_irq_byname_optional(pdev_irq, name);
|
||
|
else
|
||
|
ret = platform_get_irq_optional(pdev_irq, num);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int dwc3_qcom_setup_irq(struct platform_device *pdev)
|
||
|
{
|
||
|
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
|
||
|
const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata;
|
||
|
int irq;
|
||
|
int ret;
|
||
|
|
||
|
irq = dwc3_qcom_get_irq(pdev, "hs_phy_irq",
|
||
|
pdata ? pdata->hs_phy_irq_index : -1);
|
||
|
if (irq > 0) {
|
||
|
/* Keep wakeup interrupts disabled until suspend */
|
||
|
irq_set_status_flags(irq, IRQ_NOAUTOEN);
|
||
|
ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
|
||
|
qcom_dwc3_resume_irq,
|
||
|
IRQF_ONESHOT,
|
||
|
"qcom_dwc3 HS", qcom);
|
||
|
if (ret) {
|
||
|
dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
qcom->hs_phy_irq = irq;
|
||
|
}
|
||
|
|
||
|
irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq",
|
||
|
pdata ? pdata->dp_hs_phy_irq_index : -1);
|
||
|
if (irq > 0) {
|
||
|
irq_set_status_flags(irq, IRQ_NOAUTOEN);
|
||
|
ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
|
||
|
qcom_dwc3_resume_irq,
|
||
|
IRQF_ONESHOT,
|
||
|
"qcom_dwc3 DP_HS", qcom);
|
||
|
if (ret) {
|
||
|
dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
qcom->dp_hs_phy_irq = irq;
|
||
|
}
|
||
|
|
||
|
irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq",
|
||
|
pdata ? pdata->dm_hs_phy_irq_index : -1);
|
||
|
if (irq > 0) {
|
||
|
irq_set_status_flags(irq, IRQ_NOAUTOEN);
|
||
|
ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
|
||
|
qcom_dwc3_resume_irq,
|
||
|
IRQF_ONESHOT,
|
||
|
"qcom_dwc3 DM_HS", qcom);
|
||
|
if (ret) {
|
||
|
dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
qcom->dm_hs_phy_irq = irq;
|
||
|
}
|
||
|
|
||
|
irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq",
|
||
|
pdata ? pdata->ss_phy_irq_index : -1);
|
||
|
if (irq > 0) {
|
||
|
irq_set_status_flags(irq, IRQ_NOAUTOEN);
|
||
|
ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
|
||
|
qcom_dwc3_resume_irq,
|
||
|
IRQF_ONESHOT,
|
||
|
"qcom_dwc3 SS", qcom);
|
||
|
if (ret) {
|
||
|
dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
qcom->ss_phy_irq = irq;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
|
||
|
{
|
||
|
struct device *dev = qcom->dev;
|
||
|
struct device_node *np = dev->of_node;
|
||
|
int i;
|
||
|
|
||
|
if (!np || !count)
|
||
|
return 0;
|
||
|
|
||
|
if (count < 0)
|
||
|
return count;
|
||
|
|
||
|
qcom->num_clocks = count;
|
||
|
|
||
|
qcom->clks = devm_kcalloc(dev, qcom->num_clocks,
|
||
|
sizeof(struct clk *), GFP_KERNEL);
|
||
|
if (!qcom->clks)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
for (i = 0; i < qcom->num_clocks; i++) {
|
||
|
struct clk *clk;
|
||
|
int ret;
|
||
|
|
||
|
clk = of_clk_get(np, i);
|
||
|
if (IS_ERR(clk)) {
|
||
|
while (--i >= 0)
|
||
|
clk_put(qcom->clks[i]);
|
||
|
return PTR_ERR(clk);
|
||
|
}
|
||
|
|
||
|
ret = clk_prepare_enable(clk);
|
||
|
if (ret < 0) {
|
||
|
while (--i >= 0) {
|
||
|
clk_disable_unprepare(qcom->clks[i]);
|
||
|
clk_put(qcom->clks[i]);
|
||
|
}
|
||
|
clk_put(clk);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
qcom->clks[i] = clk;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct property_entry dwc3_qcom_acpi_properties[] = {
|
||
|
PROPERTY_ENTRY_STRING("dr_mode", "host"),
|
||
|
{}
|
||
|
};
|
||
|
|
||
|
static const struct software_node dwc3_qcom_swnode = {
|
||
|
.properties = dwc3_qcom_acpi_properties,
|
||
|
};
|
||
|
|
||
|
static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
|
||
|
{
|
||
|
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
|
||
|
struct device *dev = &pdev->dev;
|
||
|
struct resource *res, *child_res = NULL;
|
||
|
struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb :
|
||
|
pdev;
|
||
|
int irq;
|
||
|
int ret;
|
||
|
|
||
|
qcom->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
|
||
|
if (!qcom->dwc3)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
qcom->dwc3->dev.parent = dev;
|
||
|
qcom->dwc3->dev.type = dev->type;
|
||
|
qcom->dwc3->dev.dma_mask = dev->dma_mask;
|
||
|
qcom->dwc3->dev.dma_parms = dev->dma_parms;
|
||
|
qcom->dwc3->dev.coherent_dma_mask = dev->coherent_dma_mask;
|
||
|
|
||
|
child_res = kcalloc(2, sizeof(*child_res), GFP_KERNEL);
|
||
|
if (!child_res)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||
|
if (!res) {
|
||
|
dev_err(&pdev->dev, "failed to get memory resource\n");
|
||
|
ret = -ENODEV;
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
child_res[0].flags = res->flags;
|
||
|
child_res[0].start = res->start;
|
||
|
child_res[0].end = child_res[0].start +
|
||
|
qcom->acpi_pdata->dwc3_core_base_size;
|
||
|
|
||
|
irq = platform_get_irq(pdev_irq, 0);
|
||
|
if (irq < 0) {
|
||
|
ret = irq;
|
||
|
goto out;
|
||
|
}
|
||
|
child_res[1].flags = IORESOURCE_IRQ;
|
||
|
child_res[1].start = child_res[1].end = irq;
|
||
|
|
||
|
ret = platform_device_add_resources(qcom->dwc3, child_res, 2);
|
||
|
if (ret) {
|
||
|
dev_err(&pdev->dev, "failed to add resources\n");
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
ret = device_add_software_node(&qcom->dwc3->dev, &dwc3_qcom_swnode);
|
||
|
if (ret < 0) {
|
||
|
dev_err(&pdev->dev, "failed to add properties\n");
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
ret = platform_device_add(qcom->dwc3);
|
||
|
if (ret) {
|
||
|
dev_err(&pdev->dev, "failed to add device\n");
|
||
|
device_remove_software_node(&qcom->dwc3->dev);
|
||
|
}
|
||
|
|
||
|
out:
|
||
|
kfree(child_res);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int dwc3_qcom_of_register_core(struct platform_device *pdev)
|
||
|
{
|
||
|
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
|
||
|
struct device_node *np = pdev->dev.of_node, *dwc3_np;
|
||
|
struct device *dev = &pdev->dev;
|
||
|
int ret;
|
||
|
|
||
|
dwc3_np = of_get_compatible_child(np, "snps,dwc3");
|
||
|
if (!dwc3_np) {
|
||
|
dev_err(dev, "failed to find dwc3 core child\n");
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
|
||
|
ret = of_platform_populate(np, NULL, NULL, dev);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "failed to register dwc3 core - %d\n", ret);
|
||
|
goto node_put;
|
||
|
}
|
||
|
|
||
|
qcom->dwc3 = of_find_device_by_node(dwc3_np);
|
||
|
if (!qcom->dwc3) {
|
||
|
ret = -ENODEV;
|
||
|
dev_err(dev, "failed to get dwc3 platform device\n");
|
||
|
of_platform_depopulate(dev);
|
||
|
}
|
||
|
|
||
|
node_put:
|
||
|
of_node_put(dwc3_np);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static struct platform_device *dwc3_qcom_create_urs_usb_platdev(struct device *dev)
|
||
|
{
|
||
|
struct platform_device *urs_usb = NULL;
|
||
|
struct fwnode_handle *fwh;
|
||
|
struct acpi_device *adev;
|
||
|
char name[8];
|
||
|
int ret;
|
||
|
int id;
|
||
|
|
||
|
/* Figure out device id */
|
||
|
ret = sscanf(fwnode_get_name(dev->fwnode), "URS%d", &id);
|
||
|
if (!ret)
|
||
|
return NULL;
|
||
|
|
||
|
/* Find the child using name */
|
||
|
snprintf(name, sizeof(name), "USB%d", id);
|
||
|
fwh = fwnode_get_named_child_node(dev->fwnode, name);
|
||
|
if (!fwh)
|
||
|
return NULL;
|
||
|
|
||
|
adev = to_acpi_device_node(fwh);
|
||
|
if (!adev)
|
||
|
goto err_put_handle;
|
||
|
|
||
|
urs_usb = acpi_create_platform_device(adev, NULL);
|
||
|
if (IS_ERR_OR_NULL(urs_usb))
|
||
|
goto err_put_handle;
|
||
|
|
||
|
return urs_usb;
|
||
|
|
||
|
err_put_handle:
|
||
|
fwnode_handle_put(fwh);
|
||
|
|
||
|
return urs_usb;
|
||
|
}
|
||
|
|
||
|
static void dwc3_qcom_destroy_urs_usb_platdev(struct platform_device *urs_usb)
|
||
|
{
|
||
|
struct fwnode_handle *fwh = urs_usb->dev.fwnode;
|
||
|
|
||
|
platform_device_unregister(urs_usb);
|
||
|
fwnode_handle_put(fwh);
|
||
|
}
|
||
|
|
||
|
static int dwc3_qcom_probe(struct platform_device *pdev)
|
||
|
{
|
||
|
struct device_node *np = pdev->dev.of_node;
|
||
|
struct device *dev = &pdev->dev;
|
||
|
struct dwc3_qcom *qcom;
|
||
|
struct resource *res, *parent_res = NULL;
|
||
|
struct resource local_res;
|
||
|
int ret, i;
|
||
|
bool ignore_pipe_clk;
|
||
|
|
||
|
qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL);
|
||
|
if (!qcom)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
platform_set_drvdata(pdev, qcom);
|
||
|
qcom->dev = &pdev->dev;
|
||
|
|
||
|
if (has_acpi_companion(dev)) {
|
||
|
qcom->acpi_pdata = acpi_device_get_match_data(dev);
|
||
|
if (!qcom->acpi_pdata) {
|
||
|
dev_err(&pdev->dev, "no supporting ACPI device data\n");
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
qcom->resets = devm_reset_control_array_get_optional_exclusive(dev);
|
||
|
if (IS_ERR(qcom->resets)) {
|
||
|
ret = PTR_ERR(qcom->resets);
|
||
|
dev_err(&pdev->dev, "failed to get resets, err=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = reset_control_assert(qcom->resets);
|
||
|
if (ret) {
|
||
|
dev_err(&pdev->dev, "failed to assert resets, err=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
usleep_range(10, 1000);
|
||
|
|
||
|
ret = reset_control_deassert(qcom->resets);
|
||
|
if (ret) {
|
||
|
dev_err(&pdev->dev, "failed to deassert resets, err=%d\n", ret);
|
||
|
goto reset_assert;
|
||
|
}
|
||
|
|
||
|
ret = dwc3_qcom_clk_init(qcom, of_clk_get_parent_count(np));
|
||
|
if (ret) {
|
||
|
dev_err(dev, "failed to get clocks\n");
|
||
|
goto reset_assert;
|
||
|
}
|
||
|
|
||
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||
|
|
||
|
if (np) {
|
||
|
parent_res = res;
|
||
|
} else {
|
||
|
memcpy(&local_res, res, sizeof(struct resource));
|
||
|
parent_res = &local_res;
|
||
|
|
||
|
parent_res->start = res->start +
|
||
|
qcom->acpi_pdata->qscratch_base_offset;
|
||
|
parent_res->end = parent_res->start +
|
||
|
qcom->acpi_pdata->qscratch_base_size;
|
||
|
|
||
|
if (qcom->acpi_pdata->is_urs) {
|
||
|
qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev);
|
||
|
if (IS_ERR_OR_NULL(qcom->urs_usb)) {
|
||
|
dev_err(dev, "failed to create URS USB platdev\n");
|
||
|
if (!qcom->urs_usb)
|
||
|
ret = -ENODEV;
|
||
|
else
|
||
|
ret = PTR_ERR(qcom->urs_usb);
|
||
|
goto clk_disable;
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
qcom->qscratch_base = devm_ioremap_resource(dev, parent_res);
|
||
|
if (IS_ERR(qcom->qscratch_base)) {
|
||
|
ret = PTR_ERR(qcom->qscratch_base);
|
||
|
goto free_urs;
|
||
|
}
|
||
|
|
||
|
ret = dwc3_qcom_setup_irq(pdev);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "failed to setup IRQs, err=%d\n", ret);
|
||
|
goto free_urs;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Disable pipe_clk requirement if specified. Used when dwc3
|
||
|
* operates without SSPHY and only HS/FS/LS modes are supported.
|
||
|
*/
|
||
|
ignore_pipe_clk = device_property_read_bool(dev,
|
||
|
"qcom,select-utmi-as-pipe-clk");
|
||
|
if (ignore_pipe_clk)
|
||
|
dwc3_qcom_select_utmi_clk(qcom);
|
||
|
|
||
|
if (np)
|
||
|
ret = dwc3_qcom_of_register_core(pdev);
|
||
|
else
|
||
|
ret = dwc3_qcom_acpi_register_core(pdev);
|
||
|
|
||
|
if (ret) {
|
||
|
dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret);
|
||
|
goto free_urs;
|
||
|
}
|
||
|
|
||
|
ret = dwc3_qcom_interconnect_init(qcom);
|
||
|
if (ret)
|
||
|
goto depopulate;
|
||
|
|
||
|
qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev);
|
||
|
|
||
|
/* enable vbus override for device mode */
|
||
|
if (qcom->mode != USB_DR_MODE_HOST)
|
||
|
dwc3_qcom_vbus_override_enable(qcom, true);
|
||
|
|
||
|
/* register extcon to override sw_vbus on Vbus change later */
|
||
|
ret = dwc3_qcom_register_extcon(qcom);
|
||
|
if (ret)
|
||
|
goto interconnect_exit;
|
||
|
|
||
|
device_init_wakeup(&pdev->dev, 1);
|
||
|
qcom->is_suspended = false;
|
||
|
pm_runtime_set_active(dev);
|
||
|
pm_runtime_enable(dev);
|
||
|
pm_runtime_forbid(dev);
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
interconnect_exit:
|
||
|
dwc3_qcom_interconnect_exit(qcom);
|
||
|
depopulate:
|
||
|
if (np) {
|
||
|
of_platform_depopulate(&pdev->dev);
|
||
|
} else {
|
||
|
device_remove_software_node(&qcom->dwc3->dev);
|
||
|
platform_device_del(qcom->dwc3);
|
||
|
}
|
||
|
platform_device_put(qcom->dwc3);
|
||
|
free_urs:
|
||
|
if (qcom->urs_usb)
|
||
|
dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb);
|
||
|
clk_disable:
|
||
|
for (i = qcom->num_clocks - 1; i >= 0; i--) {
|
||
|
clk_disable_unprepare(qcom->clks[i]);
|
||
|
clk_put(qcom->clks[i]);
|
||
|
}
|
||
|
reset_assert:
|
||
|
reset_control_assert(qcom->resets);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int dwc3_qcom_remove(struct platform_device *pdev)
|
||
|
{
|
||
|
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
|
||
|
struct device_node *np = pdev->dev.of_node;
|
||
|
struct device *dev = &pdev->dev;
|
||
|
int i;
|
||
|
|
||
|
if (np) {
|
||
|
of_platform_depopulate(&pdev->dev);
|
||
|
} else {
|
||
|
device_remove_software_node(&qcom->dwc3->dev);
|
||
|
platform_device_del(qcom->dwc3);
|
||
|
}
|
||
|
platform_device_put(qcom->dwc3);
|
||
|
|
||
|
if (qcom->urs_usb)
|
||
|
dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb);
|
||
|
|
||
|
for (i = qcom->num_clocks - 1; i >= 0; i--) {
|
||
|
clk_disable_unprepare(qcom->clks[i]);
|
||
|
clk_put(qcom->clks[i]);
|
||
|
}
|
||
|
qcom->num_clocks = 0;
|
||
|
|
||
|
dwc3_qcom_interconnect_exit(qcom);
|
||
|
reset_control_assert(qcom->resets);
|
||
|
|
||
|
pm_runtime_allow(dev);
|
||
|
pm_runtime_disable(dev);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int __maybe_unused dwc3_qcom_pm_suspend(struct device *dev)
|
||
|
{
|
||
|
struct dwc3_qcom *qcom = dev_get_drvdata(dev);
|
||
|
int ret = 0;
|
||
|
|
||
|
ret = dwc3_qcom_suspend(qcom);
|
||
|
if (!ret)
|
||
|
qcom->pm_suspended = true;
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int __maybe_unused dwc3_qcom_pm_resume(struct device *dev)
|
||
|
{
|
||
|
struct dwc3_qcom *qcom = dev_get_drvdata(dev);
|
||
|
int ret;
|
||
|
|
||
|
ret = dwc3_qcom_resume(qcom);
|
||
|
if (!ret)
|
||
|
qcom->pm_suspended = false;
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int __maybe_unused dwc3_qcom_runtime_suspend(struct device *dev)
|
||
|
{
|
||
|
struct dwc3_qcom *qcom = dev_get_drvdata(dev);
|
||
|
|
||
|
return dwc3_qcom_suspend(qcom);
|
||
|
}
|
||
|
|
||
|
static int __maybe_unused dwc3_qcom_runtime_resume(struct device *dev)
|
||
|
{
|
||
|
struct dwc3_qcom *qcom = dev_get_drvdata(dev);
|
||
|
|
||
|
return dwc3_qcom_resume(qcom);
|
||
|
}
|
||
|
|
||
|
static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = {
|
||
|
SET_SYSTEM_SLEEP_PM_OPS(dwc3_qcom_pm_suspend, dwc3_qcom_pm_resume)
|
||
|
SET_RUNTIME_PM_OPS(dwc3_qcom_runtime_suspend, dwc3_qcom_runtime_resume,
|
||
|
NULL)
|
||
|
};
|
||
|
|
||
|
static const struct of_device_id dwc3_qcom_of_match[] = {
|
||
|
{ .compatible = "qcom,dwc3" },
|
||
|
{ .compatible = "qcom,msm8996-dwc3" },
|
||
|
{ .compatible = "qcom,msm8998-dwc3" },
|
||
|
{ .compatible = "qcom,sdm660-dwc3" },
|
||
|
{ .compatible = "qcom,sdm845-dwc3" },
|
||
|
{ }
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match);
|
||
|
|
||
|
#ifdef CONFIG_ACPI
|
||
|
static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
|
||
|
.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
|
||
|
.qscratch_base_size = SDM845_QSCRATCH_SIZE,
|
||
|
.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
|
||
|
.hs_phy_irq_index = 1,
|
||
|
.dp_hs_phy_irq_index = 4,
|
||
|
.dm_hs_phy_irq_index = 3,
|
||
|
.ss_phy_irq_index = 2
|
||
|
};
|
||
|
|
||
|
static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = {
|
||
|
.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
|
||
|
.qscratch_base_size = SDM845_QSCRATCH_SIZE,
|
||
|
.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
|
||
|
.hs_phy_irq_index = 1,
|
||
|
.dp_hs_phy_irq_index = 4,
|
||
|
.dm_hs_phy_irq_index = 3,
|
||
|
.ss_phy_irq_index = 2,
|
||
|
.is_urs = true,
|
||
|
};
|
||
|
|
||
|
static const struct acpi_device_id dwc3_qcom_acpi_match[] = {
|
||
|
{ "QCOM2430", (unsigned long)&sdm845_acpi_pdata },
|
||
|
{ "QCOM0304", (unsigned long)&sdm845_acpi_urs_pdata },
|
||
|
{ "QCOM0497", (unsigned long)&sdm845_acpi_urs_pdata },
|
||
|
{ "QCOM04A6", (unsigned long)&sdm845_acpi_pdata },
|
||
|
{ },
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match);
|
||
|
#endif
|
||
|
|
||
|
static struct platform_driver dwc3_qcom_driver = {
|
||
|
.probe = dwc3_qcom_probe,
|
||
|
.remove = dwc3_qcom_remove,
|
||
|
.driver = {
|
||
|
.name = "dwc3-qcom",
|
||
|
.pm = &dwc3_qcom_dev_pm_ops,
|
||
|
.of_match_table = dwc3_qcom_of_match,
|
||
|
.acpi_match_table = ACPI_PTR(dwc3_qcom_acpi_match),
|
||
|
},
|
||
|
};
|
||
|
|
||
|
module_platform_driver(dwc3_qcom_driver);
|
||
|
|
||
|
MODULE_LICENSE("GPL v2");
|
||
|
MODULE_DESCRIPTION("DesignWare DWC3 QCOM Glue Driver");
|