43 lines
1.2 KiB
Plaintext
43 lines
1.2 KiB
Plaintext
|
* Marvell MVEBU SATA PHY
|
||
|
|
|
||
|
|
Power control for the SATA phy found on Marvell MVEBU SoCs.
|
||
|
|
|
||
|
|
This document extends the binding described in phy-bindings.txt
|
||
|
|
|
||
|
|
Required properties :
|
||
|
|
|
||
|
|
- reg : Offset and length of the register set for the SATA device
|
||
|
|
- compatible : Should be "marvell,mvebu-sata-phy"
|
||
|
|
- clocks : phandle of clock and specifier that supplies the device
|
||
|
|
- clock-names : Should be "sata"
|
||
|
|
|
||
|
|
Example:
|
||
|
|
sata-phy@84000 {
|
||
|
|
compatible = "marvell,mvebu-sata-phy";
|
||
|
|
reg = <0x84000 0x0334>;
|
||
|
|
clocks = <&gate_clk 15>;
|
||
|
|
clock-names = "sata";
|
||
|
|
#phy-cells = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
Armada 375 USB cluster
|
||
|
|
----------------------
|
||
|
|
|
||
|
|
Armada 375 comes with an USB2 host and device controller and an USB3
|
||
|
|
controller. The USB cluster control register allows to manage common
|
||
|
|
features of both USB controllers.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
|
||
|
|
- compatible: "marvell,armada-375-usb-cluster"
|
||
|
|
- reg: Should contain usb cluster register location and length.
|
||
|
|
- #phy-cells : from the generic phy bindings, must be 1. Possible
|
||
|
|
values are 1 (USB2), 2 (USB3).
|
||
|
|
|
||
|
|
Example:
|
||
|
|
usbcluster: usb-cluster@18400 {
|
||
|
|
compatible = "marvell,armada-375-usb-cluster";
|
||
|
|
reg = <0x18400 0x4>;
|
||
|
|
#phy-cells = <1>
|
||
|
|
};
|