69 lines
2.8 KiB
Plaintext
69 lines
2.8 KiB
Plaintext
|
Freescale Layerscape PCIe controller
|
||
|
|
|
||
|
|
This PCIe host controller is based on the Synopsys DesignWare PCIe IP
|
||
|
|
and thus inherits all the common properties defined in snps,dw-pcie.yaml.
|
||
|
|
|
||
|
|
This controller derives its clocks from the Reset Configuration Word (RCW)
|
||
|
|
which is used to describe the PLL settings at the time of chip-reset.
|
||
|
|
|
||
|
|
Also as per the available Reference Manuals, there is no specific 'version'
|
||
|
|
register available in the Freescale PCIe controller register set,
|
||
|
|
which can allow determining the underlying DesignWare PCIe controller version
|
||
|
|
information.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: should contain the platform identifier such as:
|
||
|
|
RC mode:
|
||
|
|
"fsl,ls1021a-pcie"
|
||
|
|
"fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
|
||
|
|
"fsl,ls2088a-pcie"
|
||
|
|
"fsl,ls1088a-pcie"
|
||
|
|
"fsl,ls1046a-pcie"
|
||
|
|
"fsl,ls1043a-pcie"
|
||
|
|
"fsl,ls1012a-pcie"
|
||
|
|
"fsl,ls1028a-pcie"
|
||
|
|
EP mode:
|
||
|
|
"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
|
||
|
|
"fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
|
||
|
|
"fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
|
||
|
|
"fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep"
|
||
|
|
- reg: base addresses and lengths of the PCIe controller register blocks.
|
||
|
|
- interrupts: A list of interrupt outputs of the controller. Must contain an
|
||
|
|
entry for each entry in the interrupt-names property.
|
||
|
|
- interrupt-names: Must include the following entries:
|
||
|
|
"intr": The interrupt that is asserted for controller interrupts
|
||
|
|
- fsl,pcie-scfg: Must include two entries.
|
||
|
|
The first entry must be a link to the SCFG device node
|
||
|
|
The second entry must be '0' or '1' based on physical PCIe controller index.
|
||
|
|
This is used to get SCFG PEXN registers
|
||
|
|
- dma-coherent: Indicates that the hardware IP block can ensure the coherency
|
||
|
|
of the data transferred from/to the IP block. This can avoid the software
|
||
|
|
cache flush/invalid actions, and improve the performance significantly.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
pcie@3400000 {
|
||
|
|
compatible = "fsl,ls1021a-pcie";
|
||
|
|
reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */
|
||
|
|
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
|
||
|
|
reg-names = "regs", "config";
|
||
|
|
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
|
||
|
|
interrupt-names = "intr";
|
||
|
|
fsl,pcie-scfg = <&scfg 0>;
|
||
|
|
#address-cells = <3>;
|
||
|
|
#size-cells = <2>;
|
||
|
|
device_type = "pci";
|
||
|
|
dma-coherent;
|
||
|
|
num-lanes = <4>;
|
||
|
|
bus-range = <0x0 0xff>;
|
||
|
|
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
|
||
|
|
0xc2000000 0x0 0x20000000 0x40 0x20000000 0x0 0x20000000 /* prefetchable memory */
|
||
|
|
0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
|
||
|
|
#interrupt-cells = <1>;
|
||
|
|
interrupt-map-mask = <0 0 0 7>;
|
||
|
|
interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
};
|