37 lines
1.1 KiB
Plaintext
37 lines
1.1 KiB
Plaintext
|
Device-tree bindings for AST2600 FSI master
|
||
|
|
-------------------------------------------
|
||
|
|
|
||
|
|
The AST2600 contains two identical FSI masters. They share a clock and have a
|
||
|
|
separate interrupt line and output pins.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: "aspeed,ast2600-fsi-master"
|
||
|
|
- reg: base address and length
|
||
|
|
- clocks: phandle and clock number
|
||
|
|
- interrupts: platform dependent interrupt description
|
||
|
|
- pinctrl-0: phandle to pinctrl node
|
||
|
|
- pinctrl-names: pinctrl state
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- cfam-reset-gpios: GPIO for CFAM reset
|
||
|
|
|
||
|
|
- fsi-routing-gpios: GPIO for setting the FSI mux (internal or cabled)
|
||
|
|
- fsi-mux-gpios: GPIO for detecting the desired FSI mux state
|
||
|
|
|
||
|
|
|
||
|
|
Examples:
|
||
|
|
|
||
|
|
fsi-master {
|
||
|
|
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
|
||
|
|
reg = <0x1e79b000 0x94>;
|
||
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_fsi1_default>;
|
||
|
|
clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
|
||
|
|
|
||
|
|
fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
|
||
|
|
fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
|
||
|
|
|
||
|
|
cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
|
||
|
|
};
|