80 lines
2.6 KiB
Plaintext
80 lines
2.6 KiB
Plaintext
|
Binding for TI mux clock.
|
||
|
|
|
||
|
|
Binding status: Unstable - ABI compatibility may be broken in the future
|
||
|
|
|
||
|
|
This binding uses the common clock binding[1]. It assumes a
|
||
|
|
register-mapped multiplexer with multiple input clock signals or
|
||
|
|
parents, one of which can be selected as output. This clock does not
|
||
|
|
gate or adjust the parent rate via a divider or multiplier.
|
||
|
|
|
||
|
|
By default the "clocks" property lists the parents in the same order
|
||
|
|
as they are programmed into the regster. E.g:
|
||
|
|
|
||
|
|
clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>;
|
||
|
|
|
||
|
|
results in programming the register as follows:
|
||
|
|
|
||
|
|
register value selected parent clock
|
||
|
|
0 foo_clock
|
||
|
|
1 bar_clock
|
||
|
|
2 baz_clock
|
||
|
|
|
||
|
|
Some clock controller IPs do not allow a value of zero to be programmed
|
||
|
|
into the register, instead indexing begins at 1. The optional property
|
||
|
|
"index-starts-at-one" modified the scheme as follows:
|
||
|
|
|
||
|
|
register value selected clock parent
|
||
|
|
1 foo_clock
|
||
|
|
2 bar_clock
|
||
|
|
3 baz_clock
|
||
|
|
|
||
|
|
The binding must provide the register to control the mux. Optionally
|
||
|
|
the number of bits to shift the control field in the register can be
|
||
|
|
supplied. If the shift value is missing it is the same as supplying
|
||
|
|
a zero shift.
|
||
|
|
|
||
|
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock".
|
||
|
|
- #clock-cells : from common clock binding; shall be set to 0.
|
||
|
|
- clocks : link phandles of parent clocks
|
||
|
|
- reg : register offset for register controlling adjustable mux
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- ti,bit-shift : number of bits to shift the bit-mask, defaults to
|
||
|
|
0 if not present
|
||
|
|
- ti,index-starts-at-one : valid input select programming starts at 1, not
|
||
|
|
zero
|
||
|
|
- ti,set-rate-parent : clk_set_rate is propagated to parent clock,
|
||
|
|
not supported by the composite-mux-clock subtype
|
||
|
|
- ti,latch-bit : latch the mux value to HW, only needed if the register
|
||
|
|
access requires this. As an example, dra7x DPLL_GMAC H14 muxing
|
||
|
|
implements such behavior.
|
||
|
|
|
||
|
|
Examples:
|
||
|
|
|
||
|
|
sys_clkin_ck: sys_clkin_ck@4a306110 {
|
||
|
|
#clock-cells = <0>;
|
||
|
|
compatible = "ti,mux-clock";
|
||
|
|
clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
|
||
|
|
reg = <0x0110>;
|
||
|
|
ti,index-starts-at-one;
|
||
|
|
};
|
||
|
|
|
||
|
|
abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@4a306108 {
|
||
|
|
#clock-cells = <0>;
|
||
|
|
compatible = "ti,mux-clock";
|
||
|
|
clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
|
||
|
|
ti,bit-shift = <24>;
|
||
|
|
reg = <0x0108>;
|
||
|
|
};
|
||
|
|
|
||
|
|
mcbsp5_mux_fck: mcbsp5_mux_fck {
|
||
|
|
#clock-cells = <0>;
|
||
|
|
compatible = "ti,composite-mux-clock";
|
||
|
|
clocks = <&core_96m_fck>, <&mcbsp_clks>;
|
||
|
|
ti,bit-shift = <4>;
|
||
|
|
reg = <0x02d8>;
|
||
|
|
};
|