94 lines
2.9 KiB
Plaintext
94 lines
2.9 KiB
Plaintext
|
Binding for TI DA8XX/OMAP-L13X/AM17XX/AM18XX CFGCHIP clocks
|
||
|
|
|
||
|
|
TI DA8XX/OMAP-L13X/AM17XX/AM18XX SoCs contain a general purpose set of
|
||
|
|
registers call CFGCHIPn. Some of these registers function as clock
|
||
|
|
gates. This document describes the bindings for those clocks.
|
||
|
|
|
||
|
|
All of the clock nodes described below must be child nodes of a CFGCHIP node
|
||
|
|
(compatible = "ti,da830-cfgchip").
|
||
|
|
|
||
|
|
USB PHY clocks
|
||
|
|
--------------
|
||
|
|
Required properties:
|
||
|
|
- compatible: shall be "ti,da830-usb-phy-clocks".
|
||
|
|
- #clock-cells: from common clock binding; shall be set to 1.
|
||
|
|
- clocks: phandles to the parent clocks corresponding to clock-names
|
||
|
|
- clock-names: shall be "fck", "usb_refclkin", "auxclk"
|
||
|
|
|
||
|
|
This node provides two clocks. The clock at index 0 is the USB 2.0 PHY 48MHz
|
||
|
|
clock and the clock at index 1 is the USB 1.1 PHY 48MHz clock.
|
||
|
|
|
||
|
|
eHRPWM Time Base Clock (TBCLK)
|
||
|
|
------------------------------
|
||
|
|
Required properties:
|
||
|
|
- compatible: shall be "ti,da830-tbclksync".
|
||
|
|
- #clock-cells: from common clock binding; shall be set to 0.
|
||
|
|
- clocks: phandle to the parent clock
|
||
|
|
- clock-names: shall be "fck"
|
||
|
|
|
||
|
|
PLL DIV4.5 divider
|
||
|
|
------------------
|
||
|
|
Required properties:
|
||
|
|
- compatible: shall be "ti,da830-div4p5ena".
|
||
|
|
- #clock-cells: from common clock binding; shall be set to 0.
|
||
|
|
- clocks: phandle to the parent clock
|
||
|
|
- clock-names: shall be "pll0_pllout"
|
||
|
|
|
||
|
|
EMIFA clock source (ASYNC1)
|
||
|
|
---------------------------
|
||
|
|
Required properties:
|
||
|
|
- compatible: shall be "ti,da850-async1-clksrc".
|
||
|
|
- #clock-cells: from common clock binding; shall be set to 0.
|
||
|
|
- clocks: phandles to the parent clocks corresponding to clock-names
|
||
|
|
- clock-names: shall be "pll0_sysclk3", "div4.5"
|
||
|
|
|
||
|
|
ASYNC3 clock source
|
||
|
|
-------------------
|
||
|
|
Required properties:
|
||
|
|
- compatible: shall be "ti,da850-async3-clksrc".
|
||
|
|
- #clock-cells: from common clock binding; shall be set to 0.
|
||
|
|
- clocks: phandles to the parent clocks corresponding to clock-names
|
||
|
|
- clock-names: shall be "pll0_sysclk2", "pll1_sysclk2"
|
||
|
|
|
||
|
|
Examples:
|
||
|
|
|
||
|
|
cfgchip: syscon@1417c {
|
||
|
|
compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
|
||
|
|
reg = <0x1417c 0x14>;
|
||
|
|
|
||
|
|
usb_phy_clk: usb-phy-clocks {
|
||
|
|
compatible = "ti,da830-usb-phy-clocks";
|
||
|
|
#clock-cells = <1>;
|
||
|
|
clocks = <&psc1 1>, <&usb_refclkin>, <&pll0_auxclk>;
|
||
|
|
clock-names = "fck", "usb_refclkin", "auxclk";
|
||
|
|
};
|
||
|
|
ehrpwm_tbclk: ehrpwm_tbclk {
|
||
|
|
compatible = "ti,da830-tbclksync";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clocks = <&psc1 17>;
|
||
|
|
clock-names = "fck";
|
||
|
|
};
|
||
|
|
div4p5_clk: div4.5 {
|
||
|
|
compatible = "ti,da830-div4p5ena";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clocks = <&pll0_pllout>;
|
||
|
|
clock-names = "pll0_pllout";
|
||
|
|
};
|
||
|
|
async1_clk: async1 {
|
||
|
|
compatible = "ti,da850-async1-clksrc";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clocks = <&pll0_sysclk 3>, <&div4p5_clk>;
|
||
|
|
clock-names = "pll0_sysclk3", "div4.5";
|
||
|
|
};
|
||
|
|
async3_clk: async3 {
|
||
|
|
compatible = "ti,da850-async3-clksrc";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>;
|
||
|
|
clock-names = "pll0_sysclk2", "pll1_sysclk2";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
Also see:
|
||
|
|
- Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||
|
|
|