468 lines
13 KiB
C
468 lines
13 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
/*
|
||
|
* RTC driver for Rockchip RK808
|
||
|
*
|
||
|
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
|
||
|
*
|
||
|
* Author: Chris Zhong <zyw@rock-chips.com>
|
||
|
* Author: Zhang Qing <zhangqing@rock-chips.com>
|
||
|
*/
|
||
|
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/rtc.h>
|
||
|
#include <linux/bcd.h>
|
||
|
#include <linux/mfd/rk808.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
#include <linux/i2c.h>
|
||
|
|
||
|
/* RTC_CTRL_REG bitfields */
|
||
|
#define BIT_RTC_CTRL_REG_STOP_RTC_M BIT(0)
|
||
|
|
||
|
/* RK808 has a shadowed register for saving a "frozen" RTC time.
|
||
|
* When user setting "GET_TIME" to 1, the time will save in this shadowed
|
||
|
* register. If set "READSEL" to 1, user read rtc time register, actually
|
||
|
* get the time of that moment. If we need the real time, clr this bit.
|
||
|
*/
|
||
|
#define BIT_RTC_CTRL_REG_RTC_GET_TIME BIT(6)
|
||
|
#define BIT_RTC_CTRL_REG_RTC_READSEL_M BIT(7)
|
||
|
#define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M BIT(3)
|
||
|
#define RTC_STATUS_MASK 0xFE
|
||
|
|
||
|
#define SECONDS_REG_MSK 0x7F
|
||
|
#define MINUTES_REG_MAK 0x7F
|
||
|
#define HOURS_REG_MSK 0x3F
|
||
|
#define DAYS_REG_MSK 0x3F
|
||
|
#define MONTHS_REG_MSK 0x1F
|
||
|
#define YEARS_REG_MSK 0xFF
|
||
|
#define WEEKS_REG_MSK 0x7
|
||
|
|
||
|
/* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */
|
||
|
|
||
|
#define NUM_TIME_REGS (RK808_WEEKS_REG - RK808_SECONDS_REG + 1)
|
||
|
#define NUM_ALARM_REGS (RK808_ALARM_YEARS_REG - RK808_ALARM_SECONDS_REG + 1)
|
||
|
|
||
|
struct rk_rtc_compat_reg {
|
||
|
unsigned int ctrl_reg;
|
||
|
unsigned int status_reg;
|
||
|
unsigned int alarm_seconds_reg;
|
||
|
unsigned int int_reg;
|
||
|
unsigned int seconds_reg;
|
||
|
};
|
||
|
|
||
|
struct rk808_rtc {
|
||
|
struct rk808 *rk808;
|
||
|
struct rtc_device *rtc;
|
||
|
struct rk_rtc_compat_reg *creg;
|
||
|
int irq;
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* The Rockchip calendar used by the RK808 counts November with 31 days. We use
|
||
|
* these translation functions to convert its dates to/from the Gregorian
|
||
|
* calendar used by the rest of the world. We arbitrarily define Jan 1st, 2016
|
||
|
* as the day when both calendars were in sync, and treat all other dates
|
||
|
* relative to that.
|
||
|
* NOTE: Other system software (e.g. firmware) that reads the same hardware must
|
||
|
* implement this exact same conversion algorithm, with the same anchor date.
|
||
|
*/
|
||
|
static time64_t nov2dec_transitions(struct rtc_time *tm)
|
||
|
{
|
||
|
return (tm->tm_year + 1900) - 2016 + (tm->tm_mon + 1 > 11 ? 1 : 0);
|
||
|
}
|
||
|
|
||
|
static void rockchip_to_gregorian(struct rtc_time *tm)
|
||
|
{
|
||
|
/* If it's Nov 31st, rtc_tm_to_time64() will count that like Dec 1st */
|
||
|
time64_t time = rtc_tm_to_time64(tm);
|
||
|
rtc_time64_to_tm(time + nov2dec_transitions(tm) * 86400, tm);
|
||
|
}
|
||
|
|
||
|
static void gregorian_to_rockchip(struct rtc_time *tm)
|
||
|
{
|
||
|
time64_t extra_days = nov2dec_transitions(tm);
|
||
|
time64_t time = rtc_tm_to_time64(tm);
|
||
|
rtc_time64_to_tm(time - extra_days * 86400, tm);
|
||
|
|
||
|
/* Compensate if we went back over Nov 31st (will work up to 2381) */
|
||
|
if (nov2dec_transitions(tm) < extra_days) {
|
||
|
if (tm->tm_mon + 1 == 11)
|
||
|
tm->tm_mday++; /* This may result in 31! */
|
||
|
else
|
||
|
rtc_time64_to_tm(time - (extra_days - 1) * 86400, tm);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* Read current time and date in RTC */
|
||
|
static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
|
||
|
{
|
||
|
struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
|
||
|
struct rk808 *rk808 = rk808_rtc->rk808;
|
||
|
u8 rtc_data[NUM_TIME_REGS];
|
||
|
int ret;
|
||
|
|
||
|
/* Force an update of the shadowed registers right now */
|
||
|
ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
|
||
|
BIT_RTC_CTRL_REG_RTC_GET_TIME,
|
||
|
BIT_RTC_CTRL_REG_RTC_GET_TIME);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* After we set the GET_TIME bit, the rtc time can't be read
|
||
|
* immediately. So we should wait up to 31.25 us, about one cycle of
|
||
|
* 32khz. If we clear the GET_TIME bit here, the time of i2c transfer
|
||
|
* certainly more than 31.25us: 16 * 2.5us at 400kHz bus frequency.
|
||
|
*/
|
||
|
ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
|
||
|
BIT_RTC_CTRL_REG_RTC_GET_TIME,
|
||
|
0);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = regmap_bulk_read(rk808->regmap, rk808_rtc->creg->seconds_reg,
|
||
|
rtc_data, NUM_TIME_REGS);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "Failed to bulk read rtc_data: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
tm->tm_sec = bcd2bin(rtc_data[0] & SECONDS_REG_MSK);
|
||
|
tm->tm_min = bcd2bin(rtc_data[1] & MINUTES_REG_MAK);
|
||
|
tm->tm_hour = bcd2bin(rtc_data[2] & HOURS_REG_MSK);
|
||
|
tm->tm_mday = bcd2bin(rtc_data[3] & DAYS_REG_MSK);
|
||
|
tm->tm_mon = (bcd2bin(rtc_data[4] & MONTHS_REG_MSK)) - 1;
|
||
|
tm->tm_year = (bcd2bin(rtc_data[5] & YEARS_REG_MSK)) + 100;
|
||
|
tm->tm_wday = bcd2bin(rtc_data[6] & WEEKS_REG_MSK);
|
||
|
rockchip_to_gregorian(tm);
|
||
|
dev_dbg(dev, "RTC date/time %ptRd(%d) %ptRt\n", tm, tm->tm_wday, tm);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/* Set current time and date in RTC */
|
||
|
static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
||
|
{
|
||
|
struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
|
||
|
struct rk808 *rk808 = rk808_rtc->rk808;
|
||
|
u8 rtc_data[NUM_TIME_REGS];
|
||
|
int ret;
|
||
|
|
||
|
dev_dbg(dev, "set RTC date/time %ptRd(%d) %ptRt\n", tm, tm->tm_wday, tm);
|
||
|
gregorian_to_rockchip(tm);
|
||
|
rtc_data[0] = bin2bcd(tm->tm_sec);
|
||
|
rtc_data[1] = bin2bcd(tm->tm_min);
|
||
|
rtc_data[2] = bin2bcd(tm->tm_hour);
|
||
|
rtc_data[3] = bin2bcd(tm->tm_mday);
|
||
|
rtc_data[4] = bin2bcd(tm->tm_mon + 1);
|
||
|
rtc_data[5] = bin2bcd(tm->tm_year - 100);
|
||
|
rtc_data[6] = bin2bcd(tm->tm_wday);
|
||
|
|
||
|
/* Stop RTC while updating the RTC registers */
|
||
|
ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
|
||
|
BIT_RTC_CTRL_REG_STOP_RTC_M,
|
||
|
BIT_RTC_CTRL_REG_STOP_RTC_M);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "Failed to update RTC control: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = regmap_bulk_write(rk808->regmap, rk808_rtc->creg->seconds_reg,
|
||
|
rtc_data, NUM_TIME_REGS);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "Failed to bull write rtc_data: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
/* Start RTC again */
|
||
|
ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
|
||
|
BIT_RTC_CTRL_REG_STOP_RTC_M, 0);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "Failed to update RTC control: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* Read alarm time and date in RTC */
|
||
|
static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
|
||
|
{
|
||
|
struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
|
||
|
struct rk808 *rk808 = rk808_rtc->rk808;
|
||
|
u8 alrm_data[NUM_ALARM_REGS];
|
||
|
uint32_t int_reg;
|
||
|
int ret;
|
||
|
|
||
|
ret = regmap_bulk_read(rk808->regmap,
|
||
|
rk808_rtc->creg->alarm_seconds_reg,
|
||
|
alrm_data, NUM_ALARM_REGS);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "Failed to read RTC alarm date REG: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
alrm->time.tm_sec = bcd2bin(alrm_data[0] & SECONDS_REG_MSK);
|
||
|
alrm->time.tm_min = bcd2bin(alrm_data[1] & MINUTES_REG_MAK);
|
||
|
alrm->time.tm_hour = bcd2bin(alrm_data[2] & HOURS_REG_MSK);
|
||
|
alrm->time.tm_mday = bcd2bin(alrm_data[3] & DAYS_REG_MSK);
|
||
|
alrm->time.tm_mon = (bcd2bin(alrm_data[4] & MONTHS_REG_MSK)) - 1;
|
||
|
alrm->time.tm_year = (bcd2bin(alrm_data[5] & YEARS_REG_MSK)) + 100;
|
||
|
rockchip_to_gregorian(&alrm->time);
|
||
|
|
||
|
ret = regmap_read(rk808->regmap, rk808_rtc->creg->int_reg, &int_reg);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "Failed to read RTC INT REG: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
dev_dbg(dev, "alrm read RTC date/time %ptRd(%d) %ptRt\n",
|
||
|
&alrm->time, alrm->time.tm_wday, &alrm->time);
|
||
|
|
||
|
alrm->enabled = (int_reg & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M) ? 1 : 0;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int rk808_rtc_stop_alarm(struct rk808_rtc *rk808_rtc)
|
||
|
{
|
||
|
struct rk808 *rk808 = rk808_rtc->rk808;
|
||
|
int ret;
|
||
|
|
||
|
ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->int_reg,
|
||
|
BIT_RTC_INTERRUPTS_REG_IT_ALARM_M, 0);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int rk808_rtc_start_alarm(struct rk808_rtc *rk808_rtc)
|
||
|
{
|
||
|
struct rk808 *rk808 = rk808_rtc->rk808;
|
||
|
int ret;
|
||
|
|
||
|
ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->int_reg,
|
||
|
BIT_RTC_INTERRUPTS_REG_IT_ALARM_M,
|
||
|
BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
|
||
|
{
|
||
|
struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
|
||
|
struct rk808 *rk808 = rk808_rtc->rk808;
|
||
|
u8 alrm_data[NUM_ALARM_REGS];
|
||
|
int ret;
|
||
|
|
||
|
ret = rk808_rtc_stop_alarm(rk808_rtc);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "Failed to stop alarm: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
dev_dbg(dev, "alrm set RTC date/time %ptRd(%d) %ptRt\n",
|
||
|
&alrm->time, alrm->time.tm_wday, &alrm->time);
|
||
|
|
||
|
gregorian_to_rockchip(&alrm->time);
|
||
|
alrm_data[0] = bin2bcd(alrm->time.tm_sec);
|
||
|
alrm_data[1] = bin2bcd(alrm->time.tm_min);
|
||
|
alrm_data[2] = bin2bcd(alrm->time.tm_hour);
|
||
|
alrm_data[3] = bin2bcd(alrm->time.tm_mday);
|
||
|
alrm_data[4] = bin2bcd(alrm->time.tm_mon + 1);
|
||
|
alrm_data[5] = bin2bcd(alrm->time.tm_year - 100);
|
||
|
|
||
|
ret = regmap_bulk_write(rk808->regmap,
|
||
|
rk808_rtc->creg->alarm_seconds_reg,
|
||
|
alrm_data, NUM_ALARM_REGS);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "Failed to bulk write: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
if (alrm->enabled) {
|
||
|
ret = rk808_rtc_start_alarm(rk808_rtc);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "Failed to start alarm: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int rk808_rtc_alarm_irq_enable(struct device *dev,
|
||
|
unsigned int enabled)
|
||
|
{
|
||
|
struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
|
||
|
|
||
|
if (enabled)
|
||
|
return rk808_rtc_start_alarm(rk808_rtc);
|
||
|
|
||
|
return rk808_rtc_stop_alarm(rk808_rtc);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* We will just handle setting the frequency and make use the framework for
|
||
|
* reading the periodic interupts.
|
||
|
*
|
||
|
* @freq: Current periodic IRQ freq:
|
||
|
* bit 0: every second
|
||
|
* bit 1: every minute
|
||
|
* bit 2: every hour
|
||
|
* bit 3: every day
|
||
|
*/
|
||
|
static irqreturn_t rk808_alarm_irq(int irq, void *data)
|
||
|
{
|
||
|
struct rk808_rtc *rk808_rtc = data;
|
||
|
struct rk808 *rk808 = rk808_rtc->rk808;
|
||
|
struct i2c_client *client = rk808->i2c;
|
||
|
int ret;
|
||
|
|
||
|
ret = regmap_write(rk808->regmap, rk808_rtc->creg->status_reg,
|
||
|
RTC_STATUS_MASK);
|
||
|
if (ret) {
|
||
|
dev_err(&client->dev,
|
||
|
"%s:Failed to update RTC status: %d\n", __func__, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
rtc_update_irq(rk808_rtc->rtc, 1, RTC_IRQF | RTC_AF);
|
||
|
dev_dbg(&client->dev,
|
||
|
"%s:irq=%d\n", __func__, irq);
|
||
|
return IRQ_HANDLED;
|
||
|
}
|
||
|
|
||
|
static const struct rtc_class_ops rk808_rtc_ops = {
|
||
|
.read_time = rk808_rtc_readtime,
|
||
|
.set_time = rk808_rtc_set_time,
|
||
|
.read_alarm = rk808_rtc_readalarm,
|
||
|
.set_alarm = rk808_rtc_setalarm,
|
||
|
.alarm_irq_enable = rk808_rtc_alarm_irq_enable,
|
||
|
};
|
||
|
|
||
|
#ifdef CONFIG_PM_SLEEP
|
||
|
/* Turn off the alarm if it should not be a wake source. */
|
||
|
static int rk808_rtc_suspend(struct device *dev)
|
||
|
{
|
||
|
struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
|
||
|
|
||
|
if (device_may_wakeup(dev))
|
||
|
enable_irq_wake(rk808_rtc->irq);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* Enable the alarm if it should be enabled (in case it was disabled to
|
||
|
* prevent use as a wake source).
|
||
|
*/
|
||
|
static int rk808_rtc_resume(struct device *dev)
|
||
|
{
|
||
|
struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
|
||
|
|
||
|
if (device_may_wakeup(dev))
|
||
|
disable_irq_wake(rk808_rtc->irq);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
static SIMPLE_DEV_PM_OPS(rk808_rtc_pm_ops,
|
||
|
rk808_rtc_suspend, rk808_rtc_resume);
|
||
|
|
||
|
static struct rk_rtc_compat_reg rk808_creg = {
|
||
|
.ctrl_reg = RK808_RTC_CTRL_REG,
|
||
|
.status_reg = RK808_RTC_STATUS_REG,
|
||
|
.alarm_seconds_reg = RK808_ALARM_SECONDS_REG,
|
||
|
.int_reg = RK808_RTC_INT_REG,
|
||
|
.seconds_reg = RK808_SECONDS_REG,
|
||
|
};
|
||
|
|
||
|
static struct rk_rtc_compat_reg rk817_creg = {
|
||
|
.ctrl_reg = RK817_RTC_CTRL_REG,
|
||
|
.status_reg = RK817_RTC_STATUS_REG,
|
||
|
.alarm_seconds_reg = RK817_ALARM_SECONDS_REG,
|
||
|
.int_reg = RK817_RTC_INT_REG,
|
||
|
.seconds_reg = RK817_SECONDS_REG,
|
||
|
};
|
||
|
|
||
|
static int rk808_rtc_probe(struct platform_device *pdev)
|
||
|
{
|
||
|
struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
|
||
|
struct rk808_rtc *rk808_rtc;
|
||
|
int ret;
|
||
|
|
||
|
rk808_rtc = devm_kzalloc(&pdev->dev, sizeof(*rk808_rtc), GFP_KERNEL);
|
||
|
if (rk808_rtc == NULL)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
switch (rk808->variant) {
|
||
|
case RK809_ID:
|
||
|
case RK817_ID:
|
||
|
rk808_rtc->creg = &rk817_creg;
|
||
|
break;
|
||
|
default:
|
||
|
rk808_rtc->creg = &rk808_creg;
|
||
|
break;
|
||
|
}
|
||
|
platform_set_drvdata(pdev, rk808_rtc);
|
||
|
rk808_rtc->rk808 = rk808;
|
||
|
|
||
|
/* start rtc running by default, and use shadowed timer. */
|
||
|
ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
|
||
|
BIT_RTC_CTRL_REG_STOP_RTC_M |
|
||
|
BIT_RTC_CTRL_REG_RTC_READSEL_M,
|
||
|
BIT_RTC_CTRL_REG_RTC_READSEL_M);
|
||
|
if (ret) {
|
||
|
dev_err(&pdev->dev,
|
||
|
"Failed to update RTC control: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = regmap_write(rk808->regmap, rk808_rtc->creg->status_reg,
|
||
|
RTC_STATUS_MASK);
|
||
|
if (ret) {
|
||
|
dev_err(&pdev->dev,
|
||
|
"Failed to write RTC status: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
device_init_wakeup(&pdev->dev, 1);
|
||
|
|
||
|
rk808_rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
|
||
|
if (IS_ERR(rk808_rtc->rtc))
|
||
|
return PTR_ERR(rk808_rtc->rtc);
|
||
|
|
||
|
rk808_rtc->rtc->ops = &rk808_rtc_ops;
|
||
|
|
||
|
rk808_rtc->irq = platform_get_irq(pdev, 0);
|
||
|
if (rk808_rtc->irq < 0)
|
||
|
return rk808_rtc->irq;
|
||
|
|
||
|
/* request alarm irq of rk808 */
|
||
|
ret = devm_request_threaded_irq(&pdev->dev, rk808_rtc->irq, NULL,
|
||
|
rk808_alarm_irq, 0,
|
||
|
"RTC alarm", rk808_rtc);
|
||
|
if (ret) {
|
||
|
dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n",
|
||
|
rk808_rtc->irq, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
return devm_rtc_register_device(rk808_rtc->rtc);
|
||
|
}
|
||
|
|
||
|
static struct platform_driver rk808_rtc_driver = {
|
||
|
.probe = rk808_rtc_probe,
|
||
|
.driver = {
|
||
|
.name = "rk808-rtc",
|
||
|
.pm = &rk808_rtc_pm_ops,
|
||
|
},
|
||
|
};
|
||
|
|
||
|
module_platform_driver(rk808_rtc_driver);
|
||
|
|
||
|
MODULE_DESCRIPTION("RTC driver for the rk808 series PMICs");
|
||
|
MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
|
||
|
MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
|
||
|
MODULE_LICENSE("GPL");
|
||
|
MODULE_ALIAS("platform:rk808-rtc");
|