906 lines
22 KiB
C
906 lines
22 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
/*
|
||
|
* AD5758 Digital to analog converters driver
|
||
|
*
|
||
|
* Copyright 2018 Analog Devices Inc.
|
||
|
*
|
||
|
* TODO: Currently CRC is not supported in this driver
|
||
|
*/
|
||
|
#include <linux/bsearch.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/property.h>
|
||
|
#include <linux/of.h>
|
||
|
#include <linux/of_device.h>
|
||
|
#include <linux/spi/spi.h>
|
||
|
#include <linux/gpio/consumer.h>
|
||
|
|
||
|
#include <linux/iio/iio.h>
|
||
|
#include <linux/iio/sysfs.h>
|
||
|
|
||
|
/* AD5758 registers definition */
|
||
|
#define AD5758_NOP 0x00
|
||
|
#define AD5758_DAC_INPUT 0x01
|
||
|
#define AD5758_DAC_OUTPUT 0x02
|
||
|
#define AD5758_CLEAR_CODE 0x03
|
||
|
#define AD5758_USER_GAIN 0x04
|
||
|
#define AD5758_USER_OFFSET 0x05
|
||
|
#define AD5758_DAC_CONFIG 0x06
|
||
|
#define AD5758_SW_LDAC 0x07
|
||
|
#define AD5758_KEY 0x08
|
||
|
#define AD5758_GP_CONFIG1 0x09
|
||
|
#define AD5758_GP_CONFIG2 0x0A
|
||
|
#define AD5758_DCDC_CONFIG1 0x0B
|
||
|
#define AD5758_DCDC_CONFIG2 0x0C
|
||
|
#define AD5758_WDT_CONFIG 0x0F
|
||
|
#define AD5758_DIGITAL_DIAG_CONFIG 0x10
|
||
|
#define AD5758_ADC_CONFIG 0x11
|
||
|
#define AD5758_FAULT_PIN_CONFIG 0x12
|
||
|
#define AD5758_TWO_STAGE_READBACK_SELECT 0x13
|
||
|
#define AD5758_DIGITAL_DIAG_RESULTS 0x14
|
||
|
#define AD5758_ANALOG_DIAG_RESULTS 0x15
|
||
|
#define AD5758_STATUS 0x16
|
||
|
#define AD5758_CHIP_ID 0x17
|
||
|
#define AD5758_FREQ_MONITOR 0x18
|
||
|
#define AD5758_DEVICE_ID_0 0x19
|
||
|
#define AD5758_DEVICE_ID_1 0x1A
|
||
|
#define AD5758_DEVICE_ID_2 0x1B
|
||
|
#define AD5758_DEVICE_ID_3 0x1C
|
||
|
|
||
|
/* AD5758_DAC_CONFIG */
|
||
|
#define AD5758_DAC_CONFIG_RANGE_MSK GENMASK(3, 0)
|
||
|
#define AD5758_DAC_CONFIG_RANGE_MODE(x) (((x) & 0xF) << 0)
|
||
|
#define AD5758_DAC_CONFIG_INT_EN_MSK BIT(5)
|
||
|
#define AD5758_DAC_CONFIG_INT_EN_MODE(x) (((x) & 0x1) << 5)
|
||
|
#define AD5758_DAC_CONFIG_OUT_EN_MSK BIT(6)
|
||
|
#define AD5758_DAC_CONFIG_OUT_EN_MODE(x) (((x) & 0x1) << 6)
|
||
|
#define AD5758_DAC_CONFIG_SR_EN_MSK BIT(8)
|
||
|
#define AD5758_DAC_CONFIG_SR_EN_MODE(x) (((x) & 0x1) << 8)
|
||
|
#define AD5758_DAC_CONFIG_SR_CLOCK_MSK GENMASK(12, 9)
|
||
|
#define AD5758_DAC_CONFIG_SR_CLOCK_MODE(x) (((x) & 0xF) << 9)
|
||
|
#define AD5758_DAC_CONFIG_SR_STEP_MSK GENMASK(15, 13)
|
||
|
#define AD5758_DAC_CONFIG_SR_STEP_MODE(x) (((x) & 0x7) << 13)
|
||
|
|
||
|
/* AD5758_KEY */
|
||
|
#define AD5758_KEY_CODE_RESET_1 0x15FA
|
||
|
#define AD5758_KEY_CODE_RESET_2 0xAF51
|
||
|
#define AD5758_KEY_CODE_SINGLE_ADC_CONV 0x1ADC
|
||
|
#define AD5758_KEY_CODE_RESET_WDT 0x0D06
|
||
|
#define AD5758_KEY_CODE_CALIB_MEM_REFRESH 0xFCBA
|
||
|
|
||
|
/* AD5758_DCDC_CONFIG1 */
|
||
|
#define AD5758_DCDC_CONFIG1_DCDC_VPROG_MSK GENMASK(4, 0)
|
||
|
#define AD5758_DCDC_CONFIG1_DCDC_VPROG_MODE(x) (((x) & 0x1F) << 0)
|
||
|
#define AD5758_DCDC_CONFIG1_DCDC_MODE_MSK GENMASK(6, 5)
|
||
|
#define AD5758_DCDC_CONFIG1_DCDC_MODE_MODE(x) (((x) & 0x3) << 5)
|
||
|
|
||
|
/* AD5758_DCDC_CONFIG2 */
|
||
|
#define AD5758_DCDC_CONFIG2_ILIMIT_MSK GENMASK(3, 1)
|
||
|
#define AD5758_DCDC_CONFIG2_ILIMIT_MODE(x) (((x) & 0x7) << 1)
|
||
|
#define AD5758_DCDC_CONFIG2_INTR_SAT_3WI_MSK BIT(11)
|
||
|
#define AD5758_DCDC_CONFIG2_BUSY_3WI_MSK BIT(12)
|
||
|
|
||
|
/* AD5758_DIGITAL_DIAG_RESULTS */
|
||
|
#define AD5758_CAL_MEM_UNREFRESHED_MSK BIT(15)
|
||
|
|
||
|
/* AD5758_ADC_CONFIG */
|
||
|
#define AD5758_ADC_CONFIG_PPC_BUF_EN(x) (((x) & 0x1) << 11)
|
||
|
#define AD5758_ADC_CONFIG_PPC_BUF_MSK BIT(11)
|
||
|
|
||
|
#define AD5758_WR_FLAG_MSK(x) (0x80 | ((x) & 0x1F))
|
||
|
|
||
|
#define AD5758_FULL_SCALE_MICRO 65535000000ULL
|
||
|
|
||
|
struct ad5758_range {
|
||
|
int reg;
|
||
|
int min;
|
||
|
int max;
|
||
|
};
|
||
|
|
||
|
/**
|
||
|
* struct ad5758_state - driver instance specific data
|
||
|
* @spi: spi_device
|
||
|
* @lock: mutex lock
|
||
|
* @gpio_reset: gpio descriptor for the reset line
|
||
|
* @out_range: struct which stores the output range
|
||
|
* @dc_dc_mode: variable which stores the mode of operation
|
||
|
* @dc_dc_ilim: variable which stores the dc-to-dc converter current limit
|
||
|
* @slew_time: variable which stores the target slew time
|
||
|
* @pwr_down: variable which contains whether a channel is powered down or not
|
||
|
* @d32: spi transfer buffers
|
||
|
*/
|
||
|
struct ad5758_state {
|
||
|
struct spi_device *spi;
|
||
|
struct mutex lock;
|
||
|
struct gpio_desc *gpio_reset;
|
||
|
struct ad5758_range out_range;
|
||
|
unsigned int dc_dc_mode;
|
||
|
unsigned int dc_dc_ilim;
|
||
|
unsigned int slew_time;
|
||
|
bool pwr_down;
|
||
|
__be32 d32[3];
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* Output ranges corresponding to bits [3:0] from DAC_CONFIG register
|
||
|
* 0000: 0 V to 5 V voltage range
|
||
|
* 0001: 0 V to 10 V voltage range
|
||
|
* 0010: ±5 V voltage range
|
||
|
* 0011: ±10 V voltage range
|
||
|
* 1000: 0 mA to 20 mA current range
|
||
|
* 1001: 0 mA to 24 mA current range
|
||
|
* 1010: 4 mA to 20 mA current range
|
||
|
* 1011: ±20 mA current range
|
||
|
* 1100: ±24 mA current range
|
||
|
* 1101: -1 mA to +22 mA current range
|
||
|
*/
|
||
|
enum ad5758_output_range {
|
||
|
AD5758_RANGE_0V_5V,
|
||
|
AD5758_RANGE_0V_10V,
|
||
|
AD5758_RANGE_PLUSMINUS_5V,
|
||
|
AD5758_RANGE_PLUSMINUS_10V,
|
||
|
AD5758_RANGE_0mA_20mA = 8,
|
||
|
AD5758_RANGE_0mA_24mA,
|
||
|
AD5758_RANGE_4mA_24mA,
|
||
|
AD5758_RANGE_PLUSMINUS_20mA,
|
||
|
AD5758_RANGE_PLUSMINUS_24mA,
|
||
|
AD5758_RANGE_MINUS_1mA_PLUS_22mA,
|
||
|
};
|
||
|
|
||
|
enum ad5758_dc_dc_mode {
|
||
|
AD5758_DCDC_MODE_POWER_OFF,
|
||
|
AD5758_DCDC_MODE_DPC_CURRENT,
|
||
|
AD5758_DCDC_MODE_DPC_VOLTAGE,
|
||
|
AD5758_DCDC_MODE_PPC_CURRENT,
|
||
|
};
|
||
|
|
||
|
static const struct ad5758_range ad5758_voltage_range[] = {
|
||
|
{ AD5758_RANGE_0V_5V, 0, 5000000 },
|
||
|
{ AD5758_RANGE_0V_10V, 0, 10000000 },
|
||
|
{ AD5758_RANGE_PLUSMINUS_5V, -5000000, 5000000 },
|
||
|
{ AD5758_RANGE_PLUSMINUS_10V, -10000000, 10000000 }
|
||
|
};
|
||
|
|
||
|
static const struct ad5758_range ad5758_current_range[] = {
|
||
|
{ AD5758_RANGE_0mA_20mA, 0, 20000},
|
||
|
{ AD5758_RANGE_0mA_24mA, 0, 24000 },
|
||
|
{ AD5758_RANGE_4mA_24mA, 4, 24000 },
|
||
|
{ AD5758_RANGE_PLUSMINUS_20mA, -20000, 20000 },
|
||
|
{ AD5758_RANGE_PLUSMINUS_24mA, -24000, 24000 },
|
||
|
{ AD5758_RANGE_MINUS_1mA_PLUS_22mA, -1000, 22000 },
|
||
|
};
|
||
|
|
||
|
static const int ad5758_sr_clk[16] = {
|
||
|
240000, 200000, 150000, 128000, 64000, 32000, 16000, 8000, 4000, 2000,
|
||
|
1000, 512, 256, 128, 64, 16
|
||
|
};
|
||
|
|
||
|
static const int ad5758_sr_step[8] = {
|
||
|
4, 12, 64, 120, 256, 500, 1820, 2048
|
||
|
};
|
||
|
|
||
|
static const int ad5758_dc_dc_ilim[6] = {
|
||
|
150000, 200000, 250000, 300000, 350000, 400000
|
||
|
};
|
||
|
|
||
|
static int ad5758_spi_reg_read(struct ad5758_state *st, unsigned int addr)
|
||
|
{
|
||
|
struct spi_transfer t[] = {
|
||
|
{
|
||
|
.tx_buf = &st->d32[0],
|
||
|
.len = 4,
|
||
|
.cs_change = 1,
|
||
|
}, {
|
||
|
.tx_buf = &st->d32[1],
|
||
|
.rx_buf = &st->d32[2],
|
||
|
.len = 4,
|
||
|
},
|
||
|
};
|
||
|
int ret;
|
||
|
|
||
|
st->d32[0] = cpu_to_be32(
|
||
|
(AD5758_WR_FLAG_MSK(AD5758_TWO_STAGE_READBACK_SELECT) << 24) |
|
||
|
(addr << 8));
|
||
|
st->d32[1] = cpu_to_be32(AD5758_WR_FLAG_MSK(AD5758_NOP) << 24);
|
||
|
|
||
|
ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
return (be32_to_cpu(st->d32[2]) >> 8) & 0xFFFF;
|
||
|
}
|
||
|
|
||
|
static int ad5758_spi_reg_write(struct ad5758_state *st,
|
||
|
unsigned int addr,
|
||
|
unsigned int val)
|
||
|
{
|
||
|
st->d32[0] = cpu_to_be32((AD5758_WR_FLAG_MSK(addr) << 24) |
|
||
|
((val & 0xFFFF) << 8));
|
||
|
|
||
|
return spi_write(st->spi, &st->d32[0], sizeof(st->d32[0]));
|
||
|
}
|
||
|
|
||
|
static int ad5758_spi_write_mask(struct ad5758_state *st,
|
||
|
unsigned int addr,
|
||
|
unsigned long int mask,
|
||
|
unsigned int val)
|
||
|
{
|
||
|
int regval;
|
||
|
|
||
|
regval = ad5758_spi_reg_read(st, addr);
|
||
|
if (regval < 0)
|
||
|
return regval;
|
||
|
|
||
|
regval &= ~mask;
|
||
|
regval |= val;
|
||
|
|
||
|
return ad5758_spi_reg_write(st, addr, regval);
|
||
|
}
|
||
|
|
||
|
static int cmpfunc(const void *a, const void *b)
|
||
|
{
|
||
|
return *(int *)a - *(int *)b;
|
||
|
}
|
||
|
|
||
|
static int ad5758_find_closest_match(const int *array,
|
||
|
unsigned int size, int val)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for (i = 0; i < size; i++) {
|
||
|
if (val <= array[i])
|
||
|
return i;
|
||
|
}
|
||
|
|
||
|
return size - 1;
|
||
|
}
|
||
|
|
||
|
static int ad5758_wait_for_task_complete(struct ad5758_state *st,
|
||
|
unsigned int reg,
|
||
|
unsigned int mask)
|
||
|
{
|
||
|
unsigned int timeout;
|
||
|
int ret;
|
||
|
|
||
|
timeout = 10;
|
||
|
do {
|
||
|
ret = ad5758_spi_reg_read(st, reg);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
if (!(ret & mask))
|
||
|
return 0;
|
||
|
|
||
|
usleep_range(100, 1000);
|
||
|
} while (--timeout);
|
||
|
|
||
|
dev_err(&st->spi->dev,
|
||
|
"Error reading bit 0x%x in 0x%x register\n", mask, reg);
|
||
|
|
||
|
return -EIO;
|
||
|
}
|
||
|
|
||
|
static int ad5758_calib_mem_refresh(struct ad5758_state *st)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = ad5758_spi_reg_write(st, AD5758_KEY,
|
||
|
AD5758_KEY_CODE_CALIB_MEM_REFRESH);
|
||
|
if (ret < 0) {
|
||
|
dev_err(&st->spi->dev,
|
||
|
"Failed to initiate a calibration memory refresh\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/* Wait to allow time for the internal calibrations to complete */
|
||
|
return ad5758_wait_for_task_complete(st, AD5758_DIGITAL_DIAG_RESULTS,
|
||
|
AD5758_CAL_MEM_UNREFRESHED_MSK);
|
||
|
}
|
||
|
|
||
|
static int ad5758_soft_reset(struct ad5758_state *st)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = ad5758_spi_reg_write(st, AD5758_KEY, AD5758_KEY_CODE_RESET_1);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
ret = ad5758_spi_reg_write(st, AD5758_KEY, AD5758_KEY_CODE_RESET_2);
|
||
|
|
||
|
/* Perform a software reset and wait at least 100us */
|
||
|
usleep_range(100, 1000);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int ad5758_set_dc_dc_conv_mode(struct ad5758_state *st,
|
||
|
enum ad5758_dc_dc_mode mode)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
/*
|
||
|
* The ENABLE_PPC_BUFFERS bit must be set prior to enabling PPC current
|
||
|
* mode.
|
||
|
*/
|
||
|
if (mode == AD5758_DCDC_MODE_PPC_CURRENT) {
|
||
|
ret = ad5758_spi_write_mask(st, AD5758_ADC_CONFIG,
|
||
|
AD5758_ADC_CONFIG_PPC_BUF_MSK,
|
||
|
AD5758_ADC_CONFIG_PPC_BUF_EN(1));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = ad5758_spi_write_mask(st, AD5758_DCDC_CONFIG1,
|
||
|
AD5758_DCDC_CONFIG1_DCDC_MODE_MSK,
|
||
|
AD5758_DCDC_CONFIG1_DCDC_MODE_MODE(mode));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/*
|
||
|
* Poll the BUSY_3WI bit in the DCDC_CONFIG2 register until it is 0.
|
||
|
* This allows the 3-wire interface communication to complete.
|
||
|
*/
|
||
|
ret = ad5758_wait_for_task_complete(st, AD5758_DCDC_CONFIG2,
|
||
|
AD5758_DCDC_CONFIG2_BUSY_3WI_MSK);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
st->dc_dc_mode = mode;
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int ad5758_set_dc_dc_ilim(struct ad5758_state *st, unsigned int ilim)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = ad5758_spi_write_mask(st, AD5758_DCDC_CONFIG2,
|
||
|
AD5758_DCDC_CONFIG2_ILIMIT_MSK,
|
||
|
AD5758_DCDC_CONFIG2_ILIMIT_MODE(ilim));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
/*
|
||
|
* Poll the BUSY_3WI bit in the DCDC_CONFIG2 register until it is 0.
|
||
|
* This allows the 3-wire interface communication to complete.
|
||
|
*/
|
||
|
return ad5758_wait_for_task_complete(st, AD5758_DCDC_CONFIG2,
|
||
|
AD5758_DCDC_CONFIG2_BUSY_3WI_MSK);
|
||
|
}
|
||
|
|
||
|
static int ad5758_slew_rate_set(struct ad5758_state *st,
|
||
|
unsigned int sr_clk_idx,
|
||
|
unsigned int sr_step_idx)
|
||
|
{
|
||
|
unsigned int mode;
|
||
|
unsigned long int mask;
|
||
|
int ret;
|
||
|
|
||
|
mask = AD5758_DAC_CONFIG_SR_EN_MSK |
|
||
|
AD5758_DAC_CONFIG_SR_CLOCK_MSK |
|
||
|
AD5758_DAC_CONFIG_SR_STEP_MSK;
|
||
|
mode = AD5758_DAC_CONFIG_SR_EN_MODE(1) |
|
||
|
AD5758_DAC_CONFIG_SR_STEP_MODE(sr_step_idx) |
|
||
|
AD5758_DAC_CONFIG_SR_CLOCK_MODE(sr_clk_idx);
|
||
|
|
||
|
ret = ad5758_spi_write_mask(st, AD5758_DAC_CONFIG, mask, mode);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* Wait to allow time for the internal calibrations to complete */
|
||
|
return ad5758_wait_for_task_complete(st, AD5758_DIGITAL_DIAG_RESULTS,
|
||
|
AD5758_CAL_MEM_UNREFRESHED_MSK);
|
||
|
}
|
||
|
|
||
|
static int ad5758_slew_rate_config(struct ad5758_state *st)
|
||
|
{
|
||
|
unsigned int sr_clk_idx, sr_step_idx;
|
||
|
int i, res;
|
||
|
s64 diff_new, diff_old;
|
||
|
u64 sr_step, calc_slew_time;
|
||
|
|
||
|
sr_clk_idx = 0;
|
||
|
sr_step_idx = 0;
|
||
|
diff_old = S64_MAX;
|
||
|
/*
|
||
|
* The slew time can be determined by using the formula:
|
||
|
* Slew Time = (Full Scale Out / (Step Size x Update Clk Freq))
|
||
|
* where Slew time is expressed in microseconds
|
||
|
* Given the desired slew time, the following algorithm determines the
|
||
|
* best match for the step size and the update clock frequency.
|
||
|
*/
|
||
|
for (i = 0; i < ARRAY_SIZE(ad5758_sr_clk); i++) {
|
||
|
/*
|
||
|
* Go through each valid update clock freq and determine a raw
|
||
|
* value for the step size by using the formula:
|
||
|
* Step Size = Full Scale Out / (Update Clk Freq * Slew Time)
|
||
|
*/
|
||
|
sr_step = AD5758_FULL_SCALE_MICRO;
|
||
|
do_div(sr_step, ad5758_sr_clk[i]);
|
||
|
do_div(sr_step, st->slew_time);
|
||
|
/*
|
||
|
* After a raw value for step size was determined, find the
|
||
|
* closest valid match
|
||
|
*/
|
||
|
res = ad5758_find_closest_match(ad5758_sr_step,
|
||
|
ARRAY_SIZE(ad5758_sr_step),
|
||
|
sr_step);
|
||
|
/* Calculate the slew time */
|
||
|
calc_slew_time = AD5758_FULL_SCALE_MICRO;
|
||
|
do_div(calc_slew_time, ad5758_sr_step[res]);
|
||
|
do_div(calc_slew_time, ad5758_sr_clk[i]);
|
||
|
/*
|
||
|
* Determine with how many microseconds the calculated slew time
|
||
|
* is different from the desired slew time and store the diff
|
||
|
* for the next iteration
|
||
|
*/
|
||
|
diff_new = abs(st->slew_time - calc_slew_time);
|
||
|
if (diff_new < diff_old) {
|
||
|
diff_old = diff_new;
|
||
|
sr_clk_idx = i;
|
||
|
sr_step_idx = res;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return ad5758_slew_rate_set(st, sr_clk_idx, sr_step_idx);
|
||
|
}
|
||
|
|
||
|
static int ad5758_set_out_range(struct ad5758_state *st, int range)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = ad5758_spi_write_mask(st, AD5758_DAC_CONFIG,
|
||
|
AD5758_DAC_CONFIG_RANGE_MSK,
|
||
|
AD5758_DAC_CONFIG_RANGE_MODE(range));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* Wait to allow time for the internal calibrations to complete */
|
||
|
return ad5758_wait_for_task_complete(st, AD5758_DIGITAL_DIAG_RESULTS,
|
||
|
AD5758_CAL_MEM_UNREFRESHED_MSK);
|
||
|
}
|
||
|
|
||
|
static int ad5758_internal_buffers_en(struct ad5758_state *st, bool enable)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = ad5758_spi_write_mask(st, AD5758_DAC_CONFIG,
|
||
|
AD5758_DAC_CONFIG_INT_EN_MSK,
|
||
|
AD5758_DAC_CONFIG_INT_EN_MODE(enable));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* Wait to allow time for the internal calibrations to complete */
|
||
|
return ad5758_wait_for_task_complete(st, AD5758_DIGITAL_DIAG_RESULTS,
|
||
|
AD5758_CAL_MEM_UNREFRESHED_MSK);
|
||
|
}
|
||
|
|
||
|
static int ad5758_reset(struct ad5758_state *st)
|
||
|
{
|
||
|
if (st->gpio_reset) {
|
||
|
gpiod_set_value(st->gpio_reset, 0);
|
||
|
usleep_range(100, 1000);
|
||
|
gpiod_set_value(st->gpio_reset, 1);
|
||
|
usleep_range(100, 1000);
|
||
|
|
||
|
return 0;
|
||
|
} else {
|
||
|
/* Perform a software reset */
|
||
|
return ad5758_soft_reset(st);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int ad5758_reg_access(struct iio_dev *indio_dev,
|
||
|
unsigned int reg,
|
||
|
unsigned int writeval,
|
||
|
unsigned int *readval)
|
||
|
{
|
||
|
struct ad5758_state *st = iio_priv(indio_dev);
|
||
|
int ret;
|
||
|
|
||
|
mutex_lock(&st->lock);
|
||
|
if (readval) {
|
||
|
ret = ad5758_spi_reg_read(st, reg);
|
||
|
if (ret < 0) {
|
||
|
mutex_unlock(&st->lock);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
*readval = ret;
|
||
|
ret = 0;
|
||
|
} else {
|
||
|
ret = ad5758_spi_reg_write(st, reg, writeval);
|
||
|
}
|
||
|
mutex_unlock(&st->lock);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int ad5758_read_raw(struct iio_dev *indio_dev,
|
||
|
struct iio_chan_spec const *chan,
|
||
|
int *val, int *val2, long info)
|
||
|
{
|
||
|
struct ad5758_state *st = iio_priv(indio_dev);
|
||
|
int max, min, ret;
|
||
|
|
||
|
switch (info) {
|
||
|
case IIO_CHAN_INFO_RAW:
|
||
|
mutex_lock(&st->lock);
|
||
|
ret = ad5758_spi_reg_read(st, AD5758_DAC_INPUT);
|
||
|
mutex_unlock(&st->lock);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
*val = ret;
|
||
|
return IIO_VAL_INT;
|
||
|
case IIO_CHAN_INFO_SCALE:
|
||
|
min = st->out_range.min;
|
||
|
max = st->out_range.max;
|
||
|
*val = (max - min) / 1000;
|
||
|
*val2 = 16;
|
||
|
return IIO_VAL_FRACTIONAL_LOG2;
|
||
|
case IIO_CHAN_INFO_OFFSET:
|
||
|
min = st->out_range.min;
|
||
|
max = st->out_range.max;
|
||
|
*val = ((min * (1 << 16)) / (max - min)) / 1000;
|
||
|
return IIO_VAL_INT;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int ad5758_write_raw(struct iio_dev *indio_dev,
|
||
|
struct iio_chan_spec const *chan,
|
||
|
int val, int val2, long info)
|
||
|
{
|
||
|
struct ad5758_state *st = iio_priv(indio_dev);
|
||
|
int ret;
|
||
|
|
||
|
switch (info) {
|
||
|
case IIO_CHAN_INFO_RAW:
|
||
|
mutex_lock(&st->lock);
|
||
|
ret = ad5758_spi_reg_write(st, AD5758_DAC_INPUT, val);
|
||
|
mutex_unlock(&st->lock);
|
||
|
return ret;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static ssize_t ad5758_read_powerdown(struct iio_dev *indio_dev,
|
||
|
uintptr_t priv,
|
||
|
const struct iio_chan_spec *chan,
|
||
|
char *buf)
|
||
|
{
|
||
|
struct ad5758_state *st = iio_priv(indio_dev);
|
||
|
|
||
|
return sysfs_emit(buf, "%d\n", st->pwr_down);
|
||
|
}
|
||
|
|
||
|
static ssize_t ad5758_write_powerdown(struct iio_dev *indio_dev,
|
||
|
uintptr_t priv,
|
||
|
struct iio_chan_spec const *chan,
|
||
|
const char *buf, size_t len)
|
||
|
{
|
||
|
struct ad5758_state *st = iio_priv(indio_dev);
|
||
|
bool pwr_down;
|
||
|
unsigned int dac_config_mode, val;
|
||
|
unsigned long int dac_config_msk;
|
||
|
int ret;
|
||
|
|
||
|
ret = kstrtobool(buf, &pwr_down);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
mutex_lock(&st->lock);
|
||
|
if (pwr_down)
|
||
|
val = 0;
|
||
|
else
|
||
|
val = 1;
|
||
|
|
||
|
dac_config_mode = AD5758_DAC_CONFIG_OUT_EN_MODE(val) |
|
||
|
AD5758_DAC_CONFIG_INT_EN_MODE(val);
|
||
|
dac_config_msk = AD5758_DAC_CONFIG_OUT_EN_MSK |
|
||
|
AD5758_DAC_CONFIG_INT_EN_MSK;
|
||
|
|
||
|
ret = ad5758_spi_write_mask(st, AD5758_DAC_CONFIG,
|
||
|
dac_config_msk,
|
||
|
dac_config_mode);
|
||
|
if (ret < 0)
|
||
|
goto err_unlock;
|
||
|
|
||
|
st->pwr_down = pwr_down;
|
||
|
|
||
|
err_unlock:
|
||
|
mutex_unlock(&st->lock);
|
||
|
|
||
|
return ret ? ret : len;
|
||
|
}
|
||
|
|
||
|
static const struct iio_info ad5758_info = {
|
||
|
.read_raw = ad5758_read_raw,
|
||
|
.write_raw = ad5758_write_raw,
|
||
|
.debugfs_reg_access = &ad5758_reg_access,
|
||
|
};
|
||
|
|
||
|
static const struct iio_chan_spec_ext_info ad5758_ext_info[] = {
|
||
|
{
|
||
|
.name = "powerdown",
|
||
|
.read = ad5758_read_powerdown,
|
||
|
.write = ad5758_write_powerdown,
|
||
|
.shared = IIO_SHARED_BY_TYPE,
|
||
|
},
|
||
|
{ }
|
||
|
};
|
||
|
|
||
|
#define AD5758_DAC_CHAN(_chan_type) { \
|
||
|
.type = (_chan_type), \
|
||
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_RAW) | \
|
||
|
BIT(IIO_CHAN_INFO_SCALE) | \
|
||
|
BIT(IIO_CHAN_INFO_OFFSET), \
|
||
|
.indexed = 1, \
|
||
|
.output = 1, \
|
||
|
.ext_info = ad5758_ext_info, \
|
||
|
}
|
||
|
|
||
|
static const struct iio_chan_spec ad5758_voltage_ch[] = {
|
||
|
AD5758_DAC_CHAN(IIO_VOLTAGE)
|
||
|
};
|
||
|
|
||
|
static const struct iio_chan_spec ad5758_current_ch[] = {
|
||
|
AD5758_DAC_CHAN(IIO_CURRENT)
|
||
|
};
|
||
|
|
||
|
static bool ad5758_is_valid_mode(enum ad5758_dc_dc_mode mode)
|
||
|
{
|
||
|
switch (mode) {
|
||
|
case AD5758_DCDC_MODE_DPC_CURRENT:
|
||
|
case AD5758_DCDC_MODE_DPC_VOLTAGE:
|
||
|
case AD5758_DCDC_MODE_PPC_CURRENT:
|
||
|
return true;
|
||
|
default:
|
||
|
return false;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int ad5758_crc_disable(struct ad5758_state *st)
|
||
|
{
|
||
|
unsigned int mask;
|
||
|
|
||
|
mask = (AD5758_WR_FLAG_MSK(AD5758_DIGITAL_DIAG_CONFIG) << 24) | 0x5C3A;
|
||
|
st->d32[0] = cpu_to_be32(mask);
|
||
|
|
||
|
return spi_write(st->spi, &st->d32[0], 4);
|
||
|
}
|
||
|
|
||
|
static int ad5758_find_out_range(struct ad5758_state *st,
|
||
|
const struct ad5758_range *range,
|
||
|
unsigned int size,
|
||
|
int min, int max)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for (i = 0; i < size; i++) {
|
||
|
if ((min == range[i].min) && (max == range[i].max)) {
|
||
|
st->out_range.reg = range[i].reg;
|
||
|
st->out_range.min = range[i].min;
|
||
|
st->out_range.max = range[i].max;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
static int ad5758_parse_dt(struct ad5758_state *st)
|
||
|
{
|
||
|
unsigned int tmp, tmparray[2], size;
|
||
|
const struct ad5758_range *range;
|
||
|
int *index, ret;
|
||
|
|
||
|
st->dc_dc_ilim = 0;
|
||
|
ret = device_property_read_u32(&st->spi->dev,
|
||
|
"adi,dc-dc-ilim-microamp", &tmp);
|
||
|
if (ret) {
|
||
|
dev_dbg(&st->spi->dev,
|
||
|
"Missing \"dc-dc-ilim-microamp\" property\n");
|
||
|
} else {
|
||
|
index = bsearch(&tmp, ad5758_dc_dc_ilim,
|
||
|
ARRAY_SIZE(ad5758_dc_dc_ilim),
|
||
|
sizeof(int), cmpfunc);
|
||
|
if (!index)
|
||
|
dev_dbg(&st->spi->dev, "dc-dc-ilim out of range\n");
|
||
|
else
|
||
|
st->dc_dc_ilim = index - ad5758_dc_dc_ilim;
|
||
|
}
|
||
|
|
||
|
ret = device_property_read_u32(&st->spi->dev, "adi,dc-dc-mode",
|
||
|
&st->dc_dc_mode);
|
||
|
if (ret) {
|
||
|
dev_err(&st->spi->dev, "Missing \"dc-dc-mode\" property\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
if (!ad5758_is_valid_mode(st->dc_dc_mode))
|
||
|
return -EINVAL;
|
||
|
|
||
|
if (st->dc_dc_mode == AD5758_DCDC_MODE_DPC_VOLTAGE) {
|
||
|
ret = device_property_read_u32_array(&st->spi->dev,
|
||
|
"adi,range-microvolt",
|
||
|
tmparray, 2);
|
||
|
if (ret) {
|
||
|
dev_err(&st->spi->dev,
|
||
|
"Missing \"range-microvolt\" property\n");
|
||
|
return ret;
|
||
|
}
|
||
|
range = ad5758_voltage_range;
|
||
|
size = ARRAY_SIZE(ad5758_voltage_range);
|
||
|
} else {
|
||
|
ret = device_property_read_u32_array(&st->spi->dev,
|
||
|
"adi,range-microamp",
|
||
|
tmparray, 2);
|
||
|
if (ret) {
|
||
|
dev_err(&st->spi->dev,
|
||
|
"Missing \"range-microamp\" property\n");
|
||
|
return ret;
|
||
|
}
|
||
|
range = ad5758_current_range;
|
||
|
size = ARRAY_SIZE(ad5758_current_range);
|
||
|
}
|
||
|
|
||
|
ret = ad5758_find_out_range(st, range, size, tmparray[0], tmparray[1]);
|
||
|
if (ret) {
|
||
|
dev_err(&st->spi->dev, "range invalid\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = device_property_read_u32(&st->spi->dev, "adi,slew-time-us", &tmp);
|
||
|
if (ret) {
|
||
|
dev_dbg(&st->spi->dev, "Missing \"slew-time-us\" property\n");
|
||
|
st->slew_time = 0;
|
||
|
} else {
|
||
|
st->slew_time = tmp;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int ad5758_init(struct ad5758_state *st)
|
||
|
{
|
||
|
int regval, ret;
|
||
|
|
||
|
st->gpio_reset = devm_gpiod_get_optional(&st->spi->dev, "reset",
|
||
|
GPIOD_OUT_HIGH);
|
||
|
if (IS_ERR(st->gpio_reset))
|
||
|
return PTR_ERR(st->gpio_reset);
|
||
|
|
||
|
/* Disable CRC checks */
|
||
|
ret = ad5758_crc_disable(st);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* Perform a reset */
|
||
|
ret = ad5758_reset(st);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* Disable CRC checks */
|
||
|
ret = ad5758_crc_disable(st);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* Perform a calibration memory refresh */
|
||
|
ret = ad5758_calib_mem_refresh(st);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
regval = ad5758_spi_reg_read(st, AD5758_DIGITAL_DIAG_RESULTS);
|
||
|
if (regval < 0)
|
||
|
return regval;
|
||
|
|
||
|
/* Clear all the error flags */
|
||
|
ret = ad5758_spi_reg_write(st, AD5758_DIGITAL_DIAG_RESULTS, regval);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* Set the dc-to-dc current limit */
|
||
|
ret = ad5758_set_dc_dc_ilim(st, st->dc_dc_ilim);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* Configure the dc-to-dc controller mode */
|
||
|
ret = ad5758_set_dc_dc_conv_mode(st, st->dc_dc_mode);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* Configure the output range */
|
||
|
ret = ad5758_set_out_range(st, st->out_range.reg);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* Enable Slew Rate Control, set the slew rate clock and step */
|
||
|
if (st->slew_time) {
|
||
|
ret = ad5758_slew_rate_config(st);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/* Power up the DAC and internal (INT) amplifiers */
|
||
|
ret = ad5758_internal_buffers_en(st, 1);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* Enable VIOUT */
|
||
|
return ad5758_spi_write_mask(st, AD5758_DAC_CONFIG,
|
||
|
AD5758_DAC_CONFIG_OUT_EN_MSK,
|
||
|
AD5758_DAC_CONFIG_OUT_EN_MODE(1));
|
||
|
}
|
||
|
|
||
|
static int ad5758_probe(struct spi_device *spi)
|
||
|
{
|
||
|
struct ad5758_state *st;
|
||
|
struct iio_dev *indio_dev;
|
||
|
int ret;
|
||
|
|
||
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
||
|
if (!indio_dev)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
st = iio_priv(indio_dev);
|
||
|
spi_set_drvdata(spi, indio_dev);
|
||
|
|
||
|
st->spi = spi;
|
||
|
|
||
|
mutex_init(&st->lock);
|
||
|
|
||
|
indio_dev->name = spi_get_device_id(spi)->name;
|
||
|
indio_dev->info = &ad5758_info;
|
||
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
||
|
indio_dev->num_channels = 1;
|
||
|
|
||
|
ret = ad5758_parse_dt(st);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
if (st->dc_dc_mode == AD5758_DCDC_MODE_DPC_VOLTAGE)
|
||
|
indio_dev->channels = ad5758_voltage_ch;
|
||
|
else
|
||
|
indio_dev->channels = ad5758_current_ch;
|
||
|
|
||
|
ret = ad5758_init(st);
|
||
|
if (ret < 0) {
|
||
|
dev_err(&spi->dev, "AD5758 init failed\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
return devm_iio_device_register(&st->spi->dev, indio_dev);
|
||
|
}
|
||
|
|
||
|
static const struct spi_device_id ad5758_id[] = {
|
||
|
{ "ad5758", 0 },
|
||
|
{}
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(spi, ad5758_id);
|
||
|
|
||
|
static const struct of_device_id ad5758_of_match[] = {
|
||
|
{ .compatible = "adi,ad5758" },
|
||
|
{ },
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(of, ad5758_of_match);
|
||
|
|
||
|
static struct spi_driver ad5758_driver = {
|
||
|
.driver = {
|
||
|
.name = KBUILD_MODNAME,
|
||
|
.of_match_table = ad5758_of_match,
|
||
|
},
|
||
|
.probe = ad5758_probe,
|
||
|
.id_table = ad5758_id,
|
||
|
};
|
||
|
|
||
|
module_spi_driver(ad5758_driver);
|
||
|
|
||
|
MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
|
||
|
MODULE_DESCRIPTION("Analog Devices AD5758 DAC");
|
||
|
MODULE_LICENSE("GPL v2");
|