371 lines
8.2 KiB
C
371 lines
8.2 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
/*
|
||
|
* Driver for Microchip MCP3911, Two-channel Analog Front End
|
||
|
*
|
||
|
* Copyright (C) 2018 Marcus Folkesson <marcus.folkesson@gmail.com>
|
||
|
* Copyright (C) 2018 Kent Gustavsson <kent@minoris.se>
|
||
|
*/
|
||
|
#include <linux/clk.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/err.h>
|
||
|
#include <linux/iio/iio.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/regulator/consumer.h>
|
||
|
#include <linux/spi/spi.h>
|
||
|
|
||
|
#define MCP3911_REG_CHANNEL0 0x00
|
||
|
#define MCP3911_REG_CHANNEL1 0x03
|
||
|
#define MCP3911_REG_MOD 0x06
|
||
|
#define MCP3911_REG_PHASE 0x07
|
||
|
#define MCP3911_REG_GAIN 0x09
|
||
|
|
||
|
#define MCP3911_REG_STATUSCOM 0x0a
|
||
|
#define MCP3911_STATUSCOM_CH1_24WIDTH BIT(4)
|
||
|
#define MCP3911_STATUSCOM_CH0_24WIDTH BIT(3)
|
||
|
#define MCP3911_STATUSCOM_EN_OFFCAL BIT(2)
|
||
|
#define MCP3911_STATUSCOM_EN_GAINCAL BIT(1)
|
||
|
|
||
|
#define MCP3911_REG_CONFIG 0x0c
|
||
|
#define MCP3911_CONFIG_CLKEXT BIT(1)
|
||
|
#define MCP3911_CONFIG_VREFEXT BIT(2)
|
||
|
|
||
|
#define MCP3911_REG_OFFCAL_CH0 0x0e
|
||
|
#define MCP3911_REG_GAINCAL_CH0 0x11
|
||
|
#define MCP3911_REG_OFFCAL_CH1 0x14
|
||
|
#define MCP3911_REG_GAINCAL_CH1 0x17
|
||
|
#define MCP3911_REG_VREFCAL 0x1a
|
||
|
|
||
|
#define MCP3911_CHANNEL(x) (MCP3911_REG_CHANNEL0 + x * 3)
|
||
|
#define MCP3911_OFFCAL(x) (MCP3911_REG_OFFCAL_CH0 + x * 6)
|
||
|
|
||
|
/* Internal voltage reference in mV */
|
||
|
#define MCP3911_INT_VREF_MV 1200
|
||
|
|
||
|
#define MCP3911_REG_READ(reg, id) ((((reg) << 1) | ((id) << 5) | (1 << 0)) & 0xff)
|
||
|
#define MCP3911_REG_WRITE(reg, id) ((((reg) << 1) | ((id) << 5) | (0 << 0)) & 0xff)
|
||
|
|
||
|
#define MCP3911_NUM_CHANNELS 2
|
||
|
|
||
|
struct mcp3911 {
|
||
|
struct spi_device *spi;
|
||
|
struct mutex lock;
|
||
|
struct regulator *vref;
|
||
|
struct clk *clki;
|
||
|
u32 dev_addr;
|
||
|
};
|
||
|
|
||
|
static int mcp3911_read(struct mcp3911 *adc, u8 reg, u32 *val, u8 len)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
reg = MCP3911_REG_READ(reg, adc->dev_addr);
|
||
|
ret = spi_write_then_read(adc->spi, ®, 1, val, len);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
be32_to_cpus(val);
|
||
|
*val >>= ((4 - len) * 8);
|
||
|
dev_dbg(&adc->spi->dev, "reading 0x%x from register 0x%x\n", *val,
|
||
|
reg >> 1);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int mcp3911_write(struct mcp3911 *adc, u8 reg, u32 val, u8 len)
|
||
|
{
|
||
|
dev_dbg(&adc->spi->dev, "writing 0x%x to register 0x%x\n", val, reg);
|
||
|
|
||
|
val <<= (3 - len) * 8;
|
||
|
cpu_to_be32s(&val);
|
||
|
val |= MCP3911_REG_WRITE(reg, adc->dev_addr);
|
||
|
|
||
|
return spi_write(adc->spi, &val, len + 1);
|
||
|
}
|
||
|
|
||
|
static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask,
|
||
|
u32 val, u8 len)
|
||
|
{
|
||
|
u32 tmp;
|
||
|
int ret;
|
||
|
|
||
|
ret = mcp3911_read(adc, reg, &tmp, len);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
val &= mask;
|
||
|
val |= tmp & ~mask;
|
||
|
return mcp3911_write(adc, reg, val, len);
|
||
|
}
|
||
|
|
||
|
static int mcp3911_read_raw(struct iio_dev *indio_dev,
|
||
|
struct iio_chan_spec const *channel, int *val,
|
||
|
int *val2, long mask)
|
||
|
{
|
||
|
struct mcp3911 *adc = iio_priv(indio_dev);
|
||
|
int ret = -EINVAL;
|
||
|
|
||
|
mutex_lock(&adc->lock);
|
||
|
switch (mask) {
|
||
|
case IIO_CHAN_INFO_RAW:
|
||
|
ret = mcp3911_read(adc,
|
||
|
MCP3911_CHANNEL(channel->channel), val, 3);
|
||
|
if (ret)
|
||
|
goto out;
|
||
|
|
||
|
*val = sign_extend32(*val, 23);
|
||
|
|
||
|
ret = IIO_VAL_INT;
|
||
|
break;
|
||
|
|
||
|
case IIO_CHAN_INFO_OFFSET:
|
||
|
ret = mcp3911_read(adc,
|
||
|
MCP3911_OFFCAL(channel->channel), val, 3);
|
||
|
if (ret)
|
||
|
goto out;
|
||
|
|
||
|
ret = IIO_VAL_INT;
|
||
|
break;
|
||
|
|
||
|
case IIO_CHAN_INFO_SCALE:
|
||
|
if (adc->vref) {
|
||
|
ret = regulator_get_voltage(adc->vref);
|
||
|
if (ret < 0) {
|
||
|
dev_err(indio_dev->dev.parent,
|
||
|
"failed to get vref voltage: %d\n",
|
||
|
ret);
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
*val = ret / 1000;
|
||
|
} else {
|
||
|
*val = MCP3911_INT_VREF_MV;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* For 24bit Conversion
|
||
|
* Raw = ((Voltage)/(Vref) * 2^23 * Gain * 1.5
|
||
|
* Voltage = Raw * (Vref)/(2^23 * Gain * 1.5)
|
||
|
*/
|
||
|
|
||
|
/* val2 = (2^23 * 1.5) */
|
||
|
*val2 = 12582912;
|
||
|
ret = IIO_VAL_FRACTIONAL;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
out:
|
||
|
mutex_unlock(&adc->lock);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int mcp3911_write_raw(struct iio_dev *indio_dev,
|
||
|
struct iio_chan_spec const *channel, int val,
|
||
|
int val2, long mask)
|
||
|
{
|
||
|
struct mcp3911 *adc = iio_priv(indio_dev);
|
||
|
int ret = -EINVAL;
|
||
|
|
||
|
mutex_lock(&adc->lock);
|
||
|
switch (mask) {
|
||
|
case IIO_CHAN_INFO_OFFSET:
|
||
|
if (val2 != 0) {
|
||
|
ret = -EINVAL;
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
/* Write offset */
|
||
|
ret = mcp3911_write(adc, MCP3911_OFFCAL(channel->channel), val,
|
||
|
3);
|
||
|
if (ret)
|
||
|
goto out;
|
||
|
|
||
|
/* Enable offset*/
|
||
|
ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM,
|
||
|
MCP3911_STATUSCOM_EN_OFFCAL,
|
||
|
MCP3911_STATUSCOM_EN_OFFCAL, 2);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
out:
|
||
|
mutex_unlock(&adc->lock);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
#define MCP3911_CHAN(idx) { \
|
||
|
.type = IIO_VOLTAGE, \
|
||
|
.indexed = 1, \
|
||
|
.channel = idx, \
|
||
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
||
|
BIT(IIO_CHAN_INFO_OFFSET) | \
|
||
|
BIT(IIO_CHAN_INFO_SCALE), \
|
||
|
}
|
||
|
|
||
|
static const struct iio_chan_spec mcp3911_channels[] = {
|
||
|
MCP3911_CHAN(0),
|
||
|
MCP3911_CHAN(1),
|
||
|
};
|
||
|
|
||
|
static const struct iio_info mcp3911_info = {
|
||
|
.read_raw = mcp3911_read_raw,
|
||
|
.write_raw = mcp3911_write_raw,
|
||
|
};
|
||
|
|
||
|
static int mcp3911_config(struct mcp3911 *adc, struct device_node *of_node)
|
||
|
{
|
||
|
u32 configreg;
|
||
|
int ret;
|
||
|
|
||
|
of_property_read_u32(of_node, "device-addr", &adc->dev_addr);
|
||
|
if (adc->dev_addr > 3) {
|
||
|
dev_err(&adc->spi->dev,
|
||
|
"invalid device address (%i). Must be in range 0-3.\n",
|
||
|
adc->dev_addr);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
dev_dbg(&adc->spi->dev, "use device address %i\n", adc->dev_addr);
|
||
|
|
||
|
ret = mcp3911_read(adc, MCP3911_REG_CONFIG, &configreg, 2);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
if (adc->vref) {
|
||
|
dev_dbg(&adc->spi->dev, "use external voltage reference\n");
|
||
|
configreg |= MCP3911_CONFIG_VREFEXT;
|
||
|
} else {
|
||
|
dev_dbg(&adc->spi->dev,
|
||
|
"use internal voltage reference (1.2V)\n");
|
||
|
configreg &= ~MCP3911_CONFIG_VREFEXT;
|
||
|
}
|
||
|
|
||
|
if (adc->clki) {
|
||
|
dev_dbg(&adc->spi->dev, "use external clock as clocksource\n");
|
||
|
configreg |= MCP3911_CONFIG_CLKEXT;
|
||
|
} else {
|
||
|
dev_dbg(&adc->spi->dev,
|
||
|
"use crystal oscillator as clocksource\n");
|
||
|
configreg &= ~MCP3911_CONFIG_CLKEXT;
|
||
|
}
|
||
|
|
||
|
return mcp3911_write(adc, MCP3911_REG_CONFIG, configreg, 2);
|
||
|
}
|
||
|
|
||
|
static int mcp3911_probe(struct spi_device *spi)
|
||
|
{
|
||
|
struct iio_dev *indio_dev;
|
||
|
struct mcp3911 *adc;
|
||
|
int ret;
|
||
|
|
||
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
|
||
|
if (!indio_dev)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
adc = iio_priv(indio_dev);
|
||
|
adc->spi = spi;
|
||
|
|
||
|
adc->vref = devm_regulator_get_optional(&adc->spi->dev, "vref");
|
||
|
if (IS_ERR(adc->vref)) {
|
||
|
if (PTR_ERR(adc->vref) == -ENODEV) {
|
||
|
adc->vref = NULL;
|
||
|
} else {
|
||
|
dev_err(&adc->spi->dev,
|
||
|
"failed to get regulator (%ld)\n",
|
||
|
PTR_ERR(adc->vref));
|
||
|
return PTR_ERR(adc->vref);
|
||
|
}
|
||
|
|
||
|
} else {
|
||
|
ret = regulator_enable(adc->vref);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
adc->clki = devm_clk_get(&adc->spi->dev, NULL);
|
||
|
if (IS_ERR(adc->clki)) {
|
||
|
if (PTR_ERR(adc->clki) == -ENOENT) {
|
||
|
adc->clki = NULL;
|
||
|
} else {
|
||
|
dev_err(&adc->spi->dev,
|
||
|
"failed to get adc clk (%ld)\n",
|
||
|
PTR_ERR(adc->clki));
|
||
|
ret = PTR_ERR(adc->clki);
|
||
|
goto reg_disable;
|
||
|
}
|
||
|
} else {
|
||
|
ret = clk_prepare_enable(adc->clki);
|
||
|
if (ret < 0) {
|
||
|
dev_err(&adc->spi->dev,
|
||
|
"Failed to enable clki: %d\n", ret);
|
||
|
goto reg_disable;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
ret = mcp3911_config(adc, spi->dev.of_node);
|
||
|
if (ret)
|
||
|
goto clk_disable;
|
||
|
|
||
|
indio_dev->name = spi_get_device_id(spi)->name;
|
||
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
||
|
indio_dev->info = &mcp3911_info;
|
||
|
spi_set_drvdata(spi, indio_dev);
|
||
|
|
||
|
indio_dev->channels = mcp3911_channels;
|
||
|
indio_dev->num_channels = ARRAY_SIZE(mcp3911_channels);
|
||
|
|
||
|
mutex_init(&adc->lock);
|
||
|
|
||
|
ret = iio_device_register(indio_dev);
|
||
|
if (ret)
|
||
|
goto clk_disable;
|
||
|
|
||
|
return ret;
|
||
|
|
||
|
clk_disable:
|
||
|
clk_disable_unprepare(adc->clki);
|
||
|
reg_disable:
|
||
|
if (adc->vref)
|
||
|
regulator_disable(adc->vref);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int mcp3911_remove(struct spi_device *spi)
|
||
|
{
|
||
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
||
|
struct mcp3911 *adc = iio_priv(indio_dev);
|
||
|
|
||
|
iio_device_unregister(indio_dev);
|
||
|
|
||
|
clk_disable_unprepare(adc->clki);
|
||
|
if (adc->vref)
|
||
|
regulator_disable(adc->vref);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct of_device_id mcp3911_dt_ids[] = {
|
||
|
{ .compatible = "microchip,mcp3911" },
|
||
|
{ }
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(of, mcp3911_dt_ids);
|
||
|
|
||
|
static const struct spi_device_id mcp3911_id[] = {
|
||
|
{ "mcp3911", 0 },
|
||
|
{ }
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(spi, mcp3911_id);
|
||
|
|
||
|
static struct spi_driver mcp3911_driver = {
|
||
|
.driver = {
|
||
|
.name = "mcp3911",
|
||
|
.of_match_table = mcp3911_dt_ids,
|
||
|
},
|
||
|
.probe = mcp3911_probe,
|
||
|
.remove = mcp3911_remove,
|
||
|
.id_table = mcp3911_id,
|
||
|
};
|
||
|
module_spi_driver(mcp3911_driver);
|
||
|
|
||
|
MODULE_AUTHOR("Marcus Folkesson <marcus.folkesson@gmail.com>");
|
||
|
MODULE_AUTHOR("Kent Gustavsson <kent@minoris.se>");
|
||
|
MODULE_DESCRIPTION("Microchip Technology MCP3911");
|
||
|
MODULE_LICENSE("GPL v2");
|