kernel/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h

220 lines
7.4 KiB
C
Raw Normal View History

2024-07-22 17:22:30 +08:00
/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
/**************************************************************************
*
* Copyright 2016-2021 VMware, Inc., Palo Alto, CA., USA
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
* USE OR OTHER DEALINGS IN THE SOFTWARE.
*
**************************************************************************
*
* Based on code from vmware.c and vmmouse.c.
* Author:
* Sinclair Yeh <syeh@vmware.com>
*/
#ifndef _VMWGFX_MSG_X86_H
#define _VMWGFX_MSG_X86_H
#if defined(__i386__) || defined(__x86_64__)
#include <asm/vmware.h>
/**
* Hypervisor-specific bi-directional communication channel. Should never
* execute on bare metal hardware. The caller must make sure to check for
* supported hypervisor before using these macros.
*
* The last two parameters are both input and output and must be initialized.
*
* @cmd: [IN] Message Cmd
* @in_ebx: [IN] Message Len, through EBX
* @in_si: [IN] Input argument through SI, set to 0 if not used
* @in_di: [IN] Input argument through DI, set ot 0 if not used
* @flags: [IN] hypercall flags + [channel id]
* @magic: [IN] hypervisor magic value
* @eax: [OUT] value of EAX register
* @ebx: [OUT] e.g. status from an HB message status command
* @ecx: [OUT] e.g. status from a non-HB message status command
* @edx: [OUT] e.g. channel id
* @si: [OUT]
* @di: [OUT]
*/
#define VMW_PORT(cmd, in_ebx, in_si, in_di, \
flags, magic, \
eax, ebx, ecx, edx, si, di) \
({ \
asm volatile (VMWARE_HYPERCALL : \
"=a"(eax), \
"=b"(ebx), \
"=c"(ecx), \
"=d"(edx), \
"=S"(si), \
"=D"(di) : \
"a"(magic), \
"b"(in_ebx), \
"c"(cmd), \
"d"(flags), \
"S"(in_si), \
"D"(in_di) : \
"memory"); \
})
/**
* Hypervisor-specific bi-directional communication channel. Should never
* execute on bare metal hardware. The caller must make sure to check for
* supported hypervisor before using these macros.
*
* The last 3 parameters are both input and output and must be initialized.
*
* @cmd: [IN] Message Cmd
* @in_ecx: [IN] Message Len, through ECX
* @in_si: [IN] Input argument through SI, set to 0 if not used
* @in_di: [IN] Input argument through DI, set to 0 if not used
* @flags: [IN] hypercall flags + [channel id]
* @magic: [IN] hypervisor magic value
* @bp: [IN]
* @eax: [OUT] value of EAX register
* @ebx: [OUT] e.g. status from an HB message status command
* @ecx: [OUT] e.g. status from a non-HB message status command
* @edx: [OUT] e.g. channel id
* @si: [OUT]
* @di: [OUT]
*/
#ifdef __x86_64__
#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, \
flags, magic, bp, \
eax, ebx, ecx, edx, si, di) \
({ \
asm volatile ("push %%rbp;" \
"mov %12, %%rbp;" \
VMWARE_HYPERCALL_HB_OUT \
"pop %%rbp;" : \
"=a"(eax), \
"=b"(ebx), \
"=c"(ecx), \
"=d"(edx), \
"=S"(si), \
"=D"(di) : \
"a"(magic), \
"b"(cmd), \
"c"(in_ecx), \
"d"(flags), \
"S"(in_si), \
"D"(in_di), \
"r"(bp) : \
"memory", "cc"); \
})
#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, \
flags, magic, bp, \
eax, ebx, ecx, edx, si, di) \
({ \
asm volatile ("push %%rbp;" \
"mov %12, %%rbp;" \
VMWARE_HYPERCALL_HB_IN \
"pop %%rbp" : \
"=a"(eax), \
"=b"(ebx), \
"=c"(ecx), \
"=d"(edx), \
"=S"(si), \
"=D"(di) : \
"a"(magic), \
"b"(cmd), \
"c"(in_ecx), \
"d"(flags), \
"S"(in_si), \
"D"(in_di), \
"r"(bp) : \
"memory", "cc"); \
})
#elif defined(__i386__)
/*
* In the 32-bit version of this macro, we store bp in a memory location
* because we've ran out of registers.
* Now we can't reference that memory location while we've modified
* %esp or %ebp, so we first push it on the stack, just before we push
* %ebp, and then when we need it we read it from the stack where we
* just pushed it.
*/
#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, \
flags, magic, bp, \
eax, ebx, ecx, edx, si, di) \
({ \
asm volatile ("push %12;" \
"push %%ebp;" \
"mov 0x04(%%esp), %%ebp;" \
VMWARE_HYPERCALL_HB_OUT \
"pop %%ebp;" \
"add $0x04, %%esp;" : \
"=a"(eax), \
"=b"(ebx), \
"=c"(ecx), \
"=d"(edx), \
"=S"(si), \
"=D"(di) : \
"a"(magic), \
"b"(cmd), \
"c"(in_ecx), \
"d"(flags), \
"S"(in_si), \
"D"(in_di), \
"m"(bp) : \
"memory", "cc"); \
})
#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, \
flags, magic, bp, \
eax, ebx, ecx, edx, si, di) \
({ \
asm volatile ("push %12;" \
"push %%ebp;" \
"mov 0x04(%%esp), %%ebp;" \
VMWARE_HYPERCALL_HB_IN \
"pop %%ebp;" \
"add $0x04, %%esp;" : \
"=a"(eax), \
"=b"(ebx), \
"=c"(ecx), \
"=d"(edx), \
"=S"(si), \
"=D"(di) : \
"a"(magic), \
"b"(cmd), \
"c"(in_ecx), \
"d"(flags), \
"S"(in_si), \
"D"(in_di), \
"m"(bp) : \
"memory", "cc"); \
})
#endif /* defined(__i386__) */
#endif /* defined(__i386__) || defined(__x86_64__) */
#endif /* _VMWGFX_MSG_X86_H */