kernel/drivers/gpu/drm/i915/gem/i915_gem_tiling.c

462 lines
12 KiB
C
Raw Normal View History

2024-07-22 17:22:30 +08:00
/*
* SPDX-License-Identifier: MIT
*
* Copyright © 2008 Intel Corporation
*/
#include <linux/string.h>
#include <linux/bitops.h>
#include "i915_drv.h"
#include "i915_gem.h"
#include "i915_gem_ioctls.h"
#include "i915_gem_mman.h"
#include "i915_gem_object.h"
/**
* DOC: buffer object tiling
*
* i915_gem_set_tiling_ioctl() and i915_gem_get_tiling_ioctl() is the userspace
* interface to declare fence register requirements.
*
* In principle GEM doesn't care at all about the internal data layout of an
* object, and hence it also doesn't care about tiling or swizzling. There's two
* exceptions:
*
* - For X and Y tiling the hardware provides detilers for CPU access, so called
* fences. Since there's only a limited amount of them the kernel must manage
* these, and therefore userspace must tell the kernel the object tiling if it
* wants to use fences for detiling.
* - On gen3 and gen4 platforms have a swizzling pattern for tiled objects which
* depends upon the physical page frame number. When swapping such objects the
* page frame number might change and the kernel must be able to fix this up
* and hence now the tiling. Note that on a subset of platforms with
* asymmetric memory channel population the swizzling pattern changes in an
* unknown way, and for those the kernel simply forbids swapping completely.
*
* Since neither of this applies for new tiling layouts on modern platforms like
* W, Ys and Yf tiling GEM only allows object tiling to be set to X or Y tiled.
* Anything else can be handled in userspace entirely without the kernel's
* invovlement.
*/
/**
* i915_gem_fence_size - required global GTT size for a fence
* @i915: i915 device
* @size: object size
* @tiling: tiling mode
* @stride: tiling stride
*
* Return the required global GTT size for a fence (view of a tiled object),
* taking into account potential fence register mapping.
*/
u32 i915_gem_fence_size(struct drm_i915_private *i915,
u32 size, unsigned int tiling, unsigned int stride)
{
u32 ggtt_size;
GEM_BUG_ON(!size);
if (tiling == I915_TILING_NONE)
return size;
GEM_BUG_ON(!stride);
if (GRAPHICS_VER(i915) >= 4) {
stride *= i915_gem_tile_height(tiling);
GEM_BUG_ON(!IS_ALIGNED(stride, I965_FENCE_PAGE));
return roundup(size, stride);
}
/* Previous chips need a power-of-two fence region when tiling */
if (GRAPHICS_VER(i915) == 3)
ggtt_size = 1024*1024;
else
ggtt_size = 512*1024;
while (ggtt_size < size)
ggtt_size <<= 1;
return ggtt_size;
}
/**
* i915_gem_fence_alignment - required global GTT alignment for a fence
* @i915: i915 device
* @size: object size
* @tiling: tiling mode
* @stride: tiling stride
*
* Return the required global GTT alignment for a fence (a view of a tiled
* object), taking into account potential fence register mapping.
*/
u32 i915_gem_fence_alignment(struct drm_i915_private *i915, u32 size,
unsigned int tiling, unsigned int stride)
{
GEM_BUG_ON(!size);
/*
* Minimum alignment is 4k (GTT page size), but might be greater
* if a fence register is needed for the object.
*/
if (tiling == I915_TILING_NONE)
return I915_GTT_MIN_ALIGNMENT;
if (GRAPHICS_VER(i915) >= 4)
return I965_FENCE_PAGE;
/*
* Previous chips need to be aligned to the size of the smallest
* fence register that can contain the object.
*/
return i915_gem_fence_size(i915, size, tiling, stride);
}
/* Check pitch constriants for all chips & tiling formats */
static bool
i915_tiling_ok(struct drm_i915_gem_object *obj,
unsigned int tiling, unsigned int stride)
{
struct drm_i915_private *i915 = to_i915(obj->base.dev);
unsigned int tile_width;
/* Linear is always fine */
if (tiling == I915_TILING_NONE)
return true;
if (tiling > I915_TILING_LAST)
return false;
/* check maximum stride & object size */
/* i965+ stores the end address of the gtt mapping in the fence
* reg, so dont bother to check the size */
if (GRAPHICS_VER(i915) >= 7) {
if (stride / 128 > GEN7_FENCE_MAX_PITCH_VAL)
return false;
} else if (GRAPHICS_VER(i915) >= 4) {
if (stride / 128 > I965_FENCE_MAX_PITCH_VAL)
return false;
} else {
if (stride > 8192)
return false;
if (!is_power_of_2(stride))
return false;
}
if (GRAPHICS_VER(i915) == 2 ||
(tiling == I915_TILING_Y && HAS_128_BYTE_Y_TILING(i915)))
tile_width = 128;
else
tile_width = 512;
if (!stride || !IS_ALIGNED(stride, tile_width))
return false;
return true;
}
static bool i915_vma_fence_prepare(struct i915_vma *vma,
int tiling_mode, unsigned int stride)
{
struct drm_i915_private *i915 = vma->vm->i915;
u32 size, alignment;
if (!i915_vma_is_map_and_fenceable(vma))
return true;
size = i915_gem_fence_size(i915, vma->size, tiling_mode, stride);
if (vma->node.size < size)
return false;
alignment = i915_gem_fence_alignment(i915, vma->size, tiling_mode, stride);
if (!IS_ALIGNED(vma->node.start, alignment))
return false;
return true;
}
/* Make the current GTT allocation valid for the change in tiling. */
static int
i915_gem_object_fence_prepare(struct drm_i915_gem_object *obj,
int tiling_mode, unsigned int stride)
{
struct i915_ggtt *ggtt = &to_i915(obj->base.dev)->ggtt;
struct i915_vma *vma, *vn;
LIST_HEAD(unbind);
int ret = 0;
if (tiling_mode == I915_TILING_NONE)
return 0;
mutex_lock(&ggtt->vm.mutex);
spin_lock(&obj->vma.lock);
for_each_ggtt_vma(vma, obj) {
GEM_BUG_ON(vma->vm != &ggtt->vm);
if (i915_vma_fence_prepare(vma, tiling_mode, stride))
continue;
list_move(&vma->vm_link, &unbind);
}
spin_unlock(&obj->vma.lock);
list_for_each_entry_safe(vma, vn, &unbind, vm_link) {
ret = __i915_vma_unbind(vma);
if (ret) {
/* Restore the remaining vma on an error */
list_splice(&unbind, &ggtt->vm.bound_list);
break;
}
}
mutex_unlock(&ggtt->vm.mutex);
return ret;
}
int
i915_gem_object_set_tiling(struct drm_i915_gem_object *obj,
unsigned int tiling, unsigned int stride)
{
struct drm_i915_private *i915 = to_i915(obj->base.dev);
struct i915_vma *vma;
int err;
/* Make sure we don't cross-contaminate obj->tiling_and_stride */
BUILD_BUG_ON(I915_TILING_LAST & STRIDE_MASK);
GEM_BUG_ON(!i915_tiling_ok(obj, tiling, stride));
GEM_BUG_ON(!stride ^ (tiling == I915_TILING_NONE));
if ((tiling | stride) == obj->tiling_and_stride)
return 0;
if (i915_gem_object_is_framebuffer(obj))
return -EBUSY;
/* We need to rebind the object if its current allocation
* no longer meets the alignment restrictions for its new
* tiling mode. Otherwise we can just leave it alone, but
* need to ensure that any fence register is updated before
* the next fenced (either through the GTT or by the BLT unit
* on older GPUs) access.
*
* After updating the tiling parameters, we then flag whether
* we need to update an associated fence register. Note this
* has to also include the unfenced register the GPU uses
* whilst executing a fenced command for an untiled object.
*/
i915_gem_object_lock(obj, NULL);
if (i915_gem_object_is_framebuffer(obj)) {
i915_gem_object_unlock(obj);
return -EBUSY;
}
err = i915_gem_object_fence_prepare(obj, tiling, stride);
if (err) {
i915_gem_object_unlock(obj);
return err;
}
/* If the memory has unknown (i.e. varying) swizzling, we pin the
* pages to prevent them being swapped out and causing corruption
* due to the change in swizzling.
*/
if (i915_gem_object_has_pages(obj) &&
obj->mm.madv == I915_MADV_WILLNEED &&
i915->quirks & QUIRK_PIN_SWIZZLED_PAGES) {
if (tiling == I915_TILING_NONE) {
GEM_BUG_ON(!i915_gem_object_has_tiling_quirk(obj));
i915_gem_object_clear_tiling_quirk(obj);
i915_gem_object_make_shrinkable(obj);
}
if (!i915_gem_object_is_tiled(obj)) {
GEM_BUG_ON(i915_gem_object_has_tiling_quirk(obj));
i915_gem_object_make_unshrinkable(obj);
i915_gem_object_set_tiling_quirk(obj);
}
}
spin_lock(&obj->vma.lock);
for_each_ggtt_vma(vma, obj) {
vma->fence_size =
i915_gem_fence_size(i915, vma->size, tiling, stride);
vma->fence_alignment =
i915_gem_fence_alignment(i915,
vma->size, tiling, stride);
if (vma->fence)
vma->fence->dirty = true;
}
spin_unlock(&obj->vma.lock);
obj->tiling_and_stride = tiling | stride;
/* Try to preallocate memory required to save swizzling on put-pages */
if (i915_gem_object_needs_bit17_swizzle(obj)) {
if (!obj->bit_17) {
obj->bit_17 = bitmap_zalloc(obj->base.size >> PAGE_SHIFT,
GFP_KERNEL);
}
} else {
bitmap_free(obj->bit_17);
obj->bit_17 = NULL;
}
i915_gem_object_unlock(obj);
/* Force the fence to be reacquired for GTT access */
i915_gem_object_release_mmap_gtt(obj);
return 0;
}
/**
* i915_gem_set_tiling_ioctl - IOCTL handler to set tiling mode
* @dev: DRM device
* @data: data pointer for the ioctl
* @file: DRM file for the ioctl call
*
* Sets the tiling mode of an object, returning the required swizzling of
* bit 6 of addresses in the object.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int
i915_gem_set_tiling_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_i915_gem_set_tiling *args = data;
struct drm_i915_gem_object *obj;
int err;
if (!dev_priv->ggtt.num_fences)
return -EOPNOTSUPP;
obj = i915_gem_object_lookup(file, args->handle);
if (!obj)
return -ENOENT;
/*
* The tiling mode of proxy objects is handled by its generator, and
* not allowed to be changed by userspace.
*/
if (i915_gem_object_is_proxy(obj)) {
err = -ENXIO;
goto err;
}
if (!i915_tiling_ok(obj, args->tiling_mode, args->stride)) {
err = -EINVAL;
goto err;
}
if (args->tiling_mode == I915_TILING_NONE) {
args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
args->stride = 0;
} else {
if (args->tiling_mode == I915_TILING_X)
args->swizzle_mode = to_i915(dev)->ggtt.bit_6_swizzle_x;
else
args->swizzle_mode = to_i915(dev)->ggtt.bit_6_swizzle_y;
/* Hide bit 17 swizzling from the user. This prevents old Mesa
* from aborting the application on sw fallbacks to bit 17,
* and we use the pread/pwrite bit17 paths to swizzle for it.
* If there was a user that was relying on the swizzle
* information for drm_intel_bo_map()ed reads/writes this would
* break it, but we don't have any of those.
*/
if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
/* If we can't handle the swizzling, make it untiled. */
if (args->swizzle_mode == I915_BIT_6_SWIZZLE_UNKNOWN) {
args->tiling_mode = I915_TILING_NONE;
args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
args->stride = 0;
}
}
err = i915_gem_object_set_tiling(obj, args->tiling_mode, args->stride);
/* We have to maintain this existing ABI... */
args->stride = i915_gem_object_get_stride(obj);
args->tiling_mode = i915_gem_object_get_tiling(obj);
err:
i915_gem_object_put(obj);
return err;
}
/**
* i915_gem_get_tiling_ioctl - IOCTL handler to get tiling mode
* @dev: DRM device
* @data: data pointer for the ioctl
* @file: DRM file for the ioctl call
*
* Returns the current tiling mode and required bit 6 swizzling for the object.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int
i915_gem_get_tiling_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_get_tiling *args = data;
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_i915_gem_object *obj;
int err = -ENOENT;
if (!dev_priv->ggtt.num_fences)
return -EOPNOTSUPP;
rcu_read_lock();
obj = i915_gem_object_lookup_rcu(file, args->handle);
if (obj) {
args->tiling_mode =
READ_ONCE(obj->tiling_and_stride) & TILING_MASK;
err = 0;
}
rcu_read_unlock();
if (unlikely(err))
return err;
switch (args->tiling_mode) {
case I915_TILING_X:
args->swizzle_mode = dev_priv->ggtt.bit_6_swizzle_x;
break;
case I915_TILING_Y:
args->swizzle_mode = dev_priv->ggtt.bit_6_swizzle_y;
break;
default:
case I915_TILING_NONE:
args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
break;
}
/* Hide bit 17 from the user -- see comment in i915_gem_set_tiling */
if (dev_priv->quirks & QUIRK_PIN_SWIZZLED_PAGES)
args->phys_swizzle_mode = I915_BIT_6_SWIZZLE_UNKNOWN;
else
args->phys_swizzle_mode = args->swizzle_mode;
if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
return 0;
}