203 lines
6.5 KiB
Plaintext
203 lines
6.5 KiB
Plaintext
|
Qualcomm MSM8998 TLMM block
|
||
|
|
|
||
|
|
This binding describes the Top Level Mode Multiplexer block found in the
|
||
|
|
MSM8998 platform.
|
||
|
|
|
||
|
|
- compatible:
|
||
|
|
Usage: required
|
||
|
|
Value type: <string>
|
||
|
|
Definition: must be "qcom,msm8998-pinctrl"
|
||
|
|
|
||
|
|
- reg:
|
||
|
|
Usage: required
|
||
|
|
Value type: <prop-encoded-array>
|
||
|
|
Definition: the base address and size of the TLMM register space.
|
||
|
|
|
||
|
|
- interrupts:
|
||
|
|
Usage: required
|
||
|
|
Value type: <prop-encoded-array>
|
||
|
|
Definition: should specify the TLMM summary IRQ.
|
||
|
|
|
||
|
|
- interrupt-controller:
|
||
|
|
Usage: required
|
||
|
|
Value type: <none>
|
||
|
|
Definition: identifies this node as an interrupt controller
|
||
|
|
|
||
|
|
- #interrupt-cells:
|
||
|
|
Usage: required
|
||
|
|
Value type: <u32>
|
||
|
|
Definition: must be 2. Specifying the pin number and flags, as defined
|
||
|
|
in <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
|
||
|
|
- gpio-controller:
|
||
|
|
Usage: required
|
||
|
|
Value type: <none>
|
||
|
|
Definition: identifies this node as a gpio controller
|
||
|
|
|
||
|
|
- #gpio-cells:
|
||
|
|
Usage: required
|
||
|
|
Value type: <u32>
|
||
|
|
Definition: must be 2. Specifying the pin number and flags, as defined
|
||
|
|
in <dt-bindings/gpio/gpio.h>
|
||
|
|
|
||
|
|
- gpio-ranges:
|
||
|
|
Usage: required
|
||
|
|
Definition: see ../gpio/gpio.txt
|
||
|
|
|
||
|
|
- gpio-reserved-ranges:
|
||
|
|
Usage: optional
|
||
|
|
Definition: see ../gpio/gpio.txt
|
||
|
|
|
||
|
|
Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
|
||
|
|
a general description of GPIO and interrupt bindings.
|
||
|
|
|
||
|
|
Please refer to pinctrl-bindings.txt in this directory for details of the
|
||
|
|
common pinctrl bindings used by client devices, including the meaning of the
|
||
|
|
phrase "pin configuration node".
|
||
|
|
|
||
|
|
The pin configuration nodes act as a container for an arbitrary number of
|
||
|
|
subnodes. Each of these subnodes represents some desired configuration for a
|
||
|
|
pin, a group, or a list of pins or groups. This configuration can include the
|
||
|
|
mux function to select on those pin(s)/group(s), and various pin configuration
|
||
|
|
parameters, such as pull-up, drive strength, etc.
|
||
|
|
|
||
|
|
|
||
|
|
PIN CONFIGURATION NODES:
|
||
|
|
|
||
|
|
The name of each subnode is not important; all subnodes should be enumerated
|
||
|
|
and processed purely based on their content.
|
||
|
|
|
||
|
|
Each subnode only affects those parameters that are explicitly listed. In
|
||
|
|
other words, a subnode that lists a mux function but no pin configuration
|
||
|
|
parameters implies no information about any pin configuration parameters.
|
||
|
|
Similarly, a pin subnode that describes a pullup parameter implies no
|
||
|
|
information about e.g. the mux function.
|
||
|
|
|
||
|
|
|
||
|
|
The following generic properties as defined in pinctrl-bindings.txt are valid
|
||
|
|
to specify in a pin configuration subnode:
|
||
|
|
|
||
|
|
- pins:
|
||
|
|
Usage: required
|
||
|
|
Value type: <string-array>
|
||
|
|
Definition: List of gpio pins affected by the properties specified in
|
||
|
|
this subnode.
|
||
|
|
|
||
|
|
Valid pins are:
|
||
|
|
gpio0-gpio149
|
||
|
|
Supports mux, bias and drive-strength
|
||
|
|
|
||
|
|
sdc2_clk, sdc2_cmd, sdc2_data
|
||
|
|
Supports bias and drive-strength
|
||
|
|
|
||
|
|
ufs_reset
|
||
|
|
Supports bias and drive-strength
|
||
|
|
|
||
|
|
- function:
|
||
|
|
Usage: required
|
||
|
|
Value type: <string>
|
||
|
|
Definition: Specify the alternative function to be configured for the
|
||
|
|
specified pins. Functions are only valid for gpio pins.
|
||
|
|
Valid values are:
|
||
|
|
|
||
|
|
gpio, adsp_ext, agera_pll, atest_char, atest_gpsadc0,
|
||
|
|
atest_gpsadc1, atest_tsens, atest_tsens2, atest_usb1,
|
||
|
|
atest_usb10, atest_usb11, atest_usb12, atest_usb13,
|
||
|
|
audio_ref, bimc_dte0, bimc_dte1, blsp10_spi, blsp10_spi_a,
|
||
|
|
blsp10_spi_b, blsp11_i2c, blsp1_spi, blsp1_spi_a,
|
||
|
|
blsp1_spi_b, blsp2_spi, blsp9_spi, blsp_i2c1, blsp_i2c2,
|
||
|
|
blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7,
|
||
|
|
blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
|
||
|
|
blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5,
|
||
|
|
blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10,
|
||
|
|
blsp_spi11, blsp_spi12, blsp_uart1_a, blsp_uart1_b,
|
||
|
|
blsp_uart2_a, blsp_uart2_b, blsp_uart3_a, blsp_uart3_b,
|
||
|
|
blsp_uart7_a, blsp_uart7_b, blsp_uart8, blsp_uart8_a,
|
||
|
|
blsp_uart8_b, blsp_uart9_a, blsp_uart9_b, blsp_uim1_a,
|
||
|
|
blsp_uim1_b, blsp_uim2_a, blsp_uim2_b, blsp_uim3_a,
|
||
|
|
blsp_uim3_b, blsp_uim7_a, blsp_uim7_b, blsp_uim8_a,
|
||
|
|
blsp_uim8_b, blsp_uim9_a, blsp_uim9_b, bt_reset,
|
||
|
|
btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0,
|
||
|
|
cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
|
||
|
|
cri_trng0, cri_trng1, dbg_out, ddr_bist, edp_hot, edp_lcd,
|
||
|
|
gcc_gp1_a, gcc_gp1_b, gcc_gp2_a, gcc_gp2_b, gcc_gp3_a,
|
||
|
|
gcc_gp3_b, hdmi_cec, hdmi_ddc, hdmi_hot, hdmi_rcv,
|
||
|
|
isense_dbg, jitter_bist, ldo_en, ldo_update, lpass_slimbus,
|
||
|
|
m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
|
||
|
|
mdp_vsync3, mdp_vsync_a, mdp_vsync_b, modem_tsync, mss_lte,
|
||
|
|
nav_dr, nav_pps, pa_indicator, pci_e0, phase_flag,
|
||
|
|
pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc,
|
||
|
|
pwr_crypto, pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b,
|
||
|
|
qdss_cti1_a, qdss_cti1_b, qdss, qlink_enable,
|
||
|
|
qlink_request, qua_mi2s, sd_card, sd_write, sdc40, sdc41,
|
||
|
|
sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu,
|
||
|
|
spkr_i2s, ssbi1, ssc_irq, ter_mi2s, tgu_ch0, tgu_ch1,
|
||
|
|
tsense_pwm1, tsense_pwm2, tsif0, tsif1,
|
||
|
|
uim1_clk, uim1_data, uim1_present,
|
||
|
|
uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
|
||
|
|
uim_batt, usb_phy, vfr_1, vsense_clkout, vsense_data0,
|
||
|
|
vsense_data1, vsense_mode, wlan1_adc0, wlan1_adc1,
|
||
|
|
wlan2_adc0, wlan2_adc1,
|
||
|
|
|
||
|
|
- bias-disable:
|
||
|
|
Usage: optional
|
||
|
|
Value type: <none>
|
||
|
|
Definition: The specified pins should be configured as no pull.
|
||
|
|
|
||
|
|
- bias-pull-down:
|
||
|
|
Usage: optional
|
||
|
|
Value type: <none>
|
||
|
|
Definition: The specified pins should be configured as pull down.
|
||
|
|
|
||
|
|
- bias-pull-up:
|
||
|
|
Usage: optional
|
||
|
|
Value type: <none>
|
||
|
|
Definition: The specified pins should be configured as pull up.
|
||
|
|
|
||
|
|
- output-high:
|
||
|
|
Usage: optional
|
||
|
|
Value type: <none>
|
||
|
|
Definition: The specified pins are configured in output mode, driven
|
||
|
|
high.
|
||
|
|
Not valid for sdc pins.
|
||
|
|
|
||
|
|
- output-low:
|
||
|
|
Usage: optional
|
||
|
|
Value type: <none>
|
||
|
|
Definition: The specified pins are configured in output mode, driven
|
||
|
|
low.
|
||
|
|
Not valid for sdc pins.
|
||
|
|
|
||
|
|
- drive-strength:
|
||
|
|
Usage: optional
|
||
|
|
Value type: <u32>
|
||
|
|
Definition: Selects the drive strength for the specified pins, in mA.
|
||
|
|
Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
tlmm: pinctrl@03400000 {
|
||
|
|
compatible = "qcom,msm8998-pinctrl";
|
||
|
|
reg = <0x03400000 0xc00000>;
|
||
|
|
interrupts = <0 208 0>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
gpio-ranges = <&tlmm 0 0 175>;
|
||
|
|
gpio-reserved-ranges = <0 4>, <81 4>;
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
|
||
|
|
uart_console_active: uart_console_active {
|
||
|
|
mux {
|
||
|
|
pins = "gpio4", "gpio5";
|
||
|
|
function = "blsp_uart8_a";
|
||
|
|
};
|
||
|
|
|
||
|
|
config {
|
||
|
|
pins = "gpio4", "gpio5";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|