133 lines
3.4 KiB
YAML
133 lines
3.4 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Qualcomm Technologies, Inc. MSM8226 TLMM block
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Bjorn Andersson <bjorn.andersson@linaro.org>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
This binding describes the Top Level Mode Multiplexer block found in the
|
||
|
|
MSM8226 platform.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: qcom,msm8226-pinctrl
|
||
|
|
|
||
|
|
reg:
|
||
|
|
description: Specifies the base address and size of the TLMM register space
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
description: Specifies the TLMM summary IRQ
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupt-controller: true
|
||
|
|
|
||
|
|
'#interrupt-cells':
|
||
|
|
description: Specifies the PIN numbers and Flags, as defined in
|
||
|
|
include/dt-bindings/interrupt-controller/irq.h
|
||
|
|
const: 2
|
||
|
|
|
||
|
|
gpio-controller: true
|
||
|
|
|
||
|
|
'#gpio-cells':
|
||
|
|
description: Specifying the pin number and flags, as defined in
|
||
|
|
include/dt-bindings/gpio/gpio.h
|
||
|
|
const: 2
|
||
|
|
|
||
|
|
gpio-ranges:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
gpio-reserved-ranges:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
#PIN CONFIGURATION NODES
|
||
|
|
patternProperties:
|
||
|
|
'-pins$':
|
||
|
|
type: object
|
||
|
|
description:
|
||
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
||
|
|
Client device subnodes use below standard properties.
|
||
|
|
$ref: "/schemas/pinctrl/pincfg-node.yaml"
|
||
|
|
|
||
|
|
properties:
|
||
|
|
pins:
|
||
|
|
description:
|
||
|
|
List of gpio pins affected by the properties specified in this
|
||
|
|
subnode.
|
||
|
|
items:
|
||
|
|
oneOf:
|
||
|
|
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"
|
||
|
|
- enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 36
|
||
|
|
|
||
|
|
function:
|
||
|
|
description:
|
||
|
|
Specify the alternative function to be configured for the specified
|
||
|
|
pins. Functions are only valid for gpio pins.
|
||
|
|
enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
|
||
|
|
blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
|
||
|
|
blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
|
||
|
|
blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
|
||
|
|
|
||
|
|
drive-strength:
|
||
|
|
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
||
|
|
default: 2
|
||
|
|
description:
|
||
|
|
Selects the drive strength for the specified pins, in mA.
|
||
|
|
|
||
|
|
bias-pull-down: true
|
||
|
|
|
||
|
|
bias-pull-up: true
|
||
|
|
|
||
|
|
bias-disable: true
|
||
|
|
|
||
|
|
output-high: true
|
||
|
|
|
||
|
|
output-low: true
|
||
|
|
|
||
|
|
required:
|
||
|
|
- pins
|
||
|
|
- function
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- interrupts
|
||
|
|
- interrupt-controller
|
||
|
|
- '#interrupt-cells'
|
||
|
|
- gpio-controller
|
||
|
|
- '#gpio-cells'
|
||
|
|
- gpio-ranges
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||
|
|
msmgpio: pinctrl@fd510000 {
|
||
|
|
compatible = "qcom,msm8226-pinctrl";
|
||
|
|
reg = <0xfd510000 0x4000>;
|
||
|
|
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
gpio-ranges = <&msmgpio 0 0 117>;
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
|
||
|
|
serial-pins {
|
||
|
|
pins = "gpio8", "gpio9";
|
||
|
|
function = "blsp_uart3";
|
||
|
|
drive-strength = <8>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
};
|