83 lines
2.8 KiB
Plaintext
83 lines
2.8 KiB
Plaintext
|
Device-Tree bindings for tilcdc DRM driver
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: value should be one of the following:
|
||
|
|
- "ti,am33xx-tilcdc" for AM335x based boards
|
||
|
|
- "ti,da850-tilcdc" for DA850/AM18x/OMAP-L138 based boards
|
||
|
|
- interrupts: the interrupt number
|
||
|
|
- reg: base address and size of the LCDC device
|
||
|
|
|
||
|
|
Recommended properties:
|
||
|
|
- ti,hwmods: Name of the hwmod associated to the LCDC
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- max-bandwidth: The maximum pixels per second that the memory
|
||
|
|
interface / lcd controller combination can sustain
|
||
|
|
- max-width: The maximum horizontal pixel width supported by
|
||
|
|
the lcd controller.
|
||
|
|
- max-pixelclock: The maximum pixel clock that can be supported
|
||
|
|
by the lcd controller in KHz.
|
||
|
|
- blue-and-red-wiring: Recognized values "straight" or "crossed".
|
||
|
|
This property deals with the LCDC revision 2 (found on AM335x)
|
||
|
|
color errata [1].
|
||
|
|
- "straight" indicates normal wiring that supports RGB565,
|
||
|
|
BGR888, and XBGR8888 color formats.
|
||
|
|
- "crossed" indicates wiring that has blue and red wires
|
||
|
|
crossed. This setup supports BGR565, RGB888 and XRGB8888
|
||
|
|
formats.
|
||
|
|
- If the property is not present or its value is not recognized
|
||
|
|
the legacy mode is assumed. This configuration supports RGB565,
|
||
|
|
RGB888 and XRGB8888 formats. However, depending on wiring, the red
|
||
|
|
and blue colors are swapped in either 16 or 24-bit color modes.
|
||
|
|
|
||
|
|
Optional nodes:
|
||
|
|
|
||
|
|
- port/ports: to describe a connection to an external encoder. The
|
||
|
|
binding follows Documentation/devicetree/bindings/graph.txt and
|
||
|
|
supports a single port with a single endpoint.
|
||
|
|
|
||
|
|
- See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and
|
||
|
|
Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml for connecting
|
||
|
|
tfp410 DVI encoder or lcd panel to lcdc
|
||
|
|
|
||
|
|
[1] There is an errata about AM335x color wiring. For 16-bit color mode
|
||
|
|
the wires work as they should (LCD_DATA[0:4] is for Blue[3:7]),
|
||
|
|
but for 24 bit color modes the wiring of blue and red components is
|
||
|
|
crossed and LCD_DATA[0:4] is for Red[3:7] and LCD_DATA[11:15] is
|
||
|
|
for Blue[3-7]. For more details see section 3.1.1 in AM335x
|
||
|
|
Silicon Errata:
|
||
|
|
https://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
fb: fb@4830e000 {
|
||
|
|
compatible = "ti,am33xx-tilcdc", "ti,da850-tilcdc";
|
||
|
|
reg = <0x4830e000 0x1000>;
|
||
|
|
interrupt-parent = <&intc>;
|
||
|
|
interrupts = <36>;
|
||
|
|
ti,hwmods = "lcdc";
|
||
|
|
|
||
|
|
blue-and-red-wiring = "crossed";
|
||
|
|
|
||
|
|
port {
|
||
|
|
lcdc_0: endpoint@0 {
|
||
|
|
remote-endpoint = <&hdmi_0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
tda19988: tda19988 {
|
||
|
|
compatible = "nxp,tda998x";
|
||
|
|
reg = <0x70>;
|
||
|
|
|
||
|
|
pinctrl-names = "default", "off";
|
||
|
|
pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
|
||
|
|
pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
|
||
|
|
|
||
|
|
port {
|
||
|
|
hdmi_0: endpoint@0 {
|
||
|
|
remote-endpoint = <&lcdc_0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|