61 lines
1.4 KiB
YAML
61 lines
1.4 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
# Copyright (C) 2020 SiFive, Inc.
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/clock/sifive/fu740-prci.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: SiFive FU740 Power Reset Clock Interrupt Controller (PRCI)
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Zong Li <zong.li@sifive.com>
|
||
|
|
- Paul Walmsley <paul.walmsley@sifive.com>
|
||
|
|
|
||
|
|
description:
|
||
|
|
On the FU740 family of SoCs, most system-wide clock and reset integration
|
||
|
|
is via the PRCI IP block.
|
||
|
|
The clock consumer should specify the desired clock via the clock ID
|
||
|
|
macros defined in include/dt-bindings/clock/sifive-fu740-prci.h.
|
||
|
|
These macros begin with PRCI_CLK_.
|
||
|
|
|
||
|
|
The hfclk and rtcclk nodes are required, and represent physical
|
||
|
|
crystals or resonators located on the PCB. These nodes should be present
|
||
|
|
underneath /, rather than /soc.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: sifive,fu740-c000-prci
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
clocks:
|
||
|
|
items:
|
||
|
|
- description: high frequency clock.
|
||
|
|
- description: RTL clock.
|
||
|
|
|
||
|
|
clock-names:
|
||
|
|
items:
|
||
|
|
- const: hfclk
|
||
|
|
- const: rtcclk
|
||
|
|
|
||
|
|
"#clock-cells":
|
||
|
|
const: 1
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- clocks
|
||
|
|
- "#clock-cells"
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
prci: clock-controller@10000000 {
|
||
|
|
compatible = "sifive,fu740-c000-prci";
|
||
|
|
reg = <0x10000000 0x1000>;
|
||
|
|
clocks = <&hfclk>, <&rtcclk>;
|
||
|
|
#clock-cells = <1>;
|
||
|
|
};
|