370 lines
9.1 KiB
C
370 lines
9.1 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
/*
|
||
|
* UFS PHY driver for Samsung SoC
|
||
|
*
|
||
|
* Copyright (C) 2020 Samsung Electronics Co., Ltd.
|
||
|
* Author: Seungwon Jeon <essuuj@gmail.com>
|
||
|
* Author: Alim Akhtar <alim.akhtar@samsung.com>
|
||
|
*
|
||
|
*/
|
||
|
#include <linux/clk.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/err.h>
|
||
|
#include <linux/of.h>
|
||
|
#include <linux/io.h>
|
||
|
#include <linux/iopoll.h>
|
||
|
#include <linux/mfd/syscon.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/phy/phy.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
#include <linux/regmap.h>
|
||
|
|
||
|
#include "phy-samsung-ufs.h"
|
||
|
|
||
|
#define for_each_phy_lane(phy, i) \
|
||
|
for (i = 0; i < (phy)->lane_cnt; i++)
|
||
|
#define for_each_phy_cfg(cfg) \
|
||
|
for (; (cfg)->id; (cfg)++)
|
||
|
|
||
|
#define PHY_DEF_LANE_CNT 1
|
||
|
|
||
|
static void samsung_ufs_phy_config(struct samsung_ufs_phy *phy,
|
||
|
const struct samsung_ufs_phy_cfg *cfg,
|
||
|
u8 lane)
|
||
|
{
|
||
|
enum {LANE_0, LANE_1}; /* lane index */
|
||
|
|
||
|
switch (lane) {
|
||
|
case LANE_0:
|
||
|
writel(cfg->val, (phy)->reg_pma + cfg->off_0);
|
||
|
break;
|
||
|
case LANE_1:
|
||
|
if (cfg->id == PHY_TRSV_BLK)
|
||
|
writel(cfg->val, (phy)->reg_pma + cfg->off_1);
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy)
|
||
|
{
|
||
|
struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
|
||
|
const unsigned int timeout_us = 100000;
|
||
|
const unsigned int sleep_us = 10;
|
||
|
u32 val;
|
||
|
int err;
|
||
|
|
||
|
err = readl_poll_timeout(
|
||
|
ufs_phy->reg_pma + PHY_APB_ADDR(PHY_PLL_LOCK_STATUS),
|
||
|
val, (val & PHY_PLL_LOCK_BIT), sleep_us, timeout_us);
|
||
|
if (err) {
|
||
|
dev_err(ufs_phy->dev,
|
||
|
"failed to get phy pll lock acquisition %d\n", err);
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
err = readl_poll_timeout(
|
||
|
ufs_phy->reg_pma + PHY_APB_ADDR(PHY_CDR_LOCK_STATUS),
|
||
|
val, (val & PHY_CDR_LOCK_BIT), sleep_us, timeout_us);
|
||
|
if (err)
|
||
|
dev_err(ufs_phy->dev,
|
||
|
"failed to get phy cdr lock acquisition %d\n", err);
|
||
|
out:
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static int samsung_ufs_phy_calibrate(struct phy *phy)
|
||
|
{
|
||
|
struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
|
||
|
struct samsung_ufs_phy_cfg **cfgs = ufs_phy->cfg;
|
||
|
const struct samsung_ufs_phy_cfg *cfg;
|
||
|
int err = 0;
|
||
|
int i;
|
||
|
|
||
|
if (unlikely(ufs_phy->ufs_phy_state < CFG_PRE_INIT ||
|
||
|
ufs_phy->ufs_phy_state >= CFG_TAG_MAX)) {
|
||
|
dev_err(ufs_phy->dev, "invalid phy config index %d\n", ufs_phy->ufs_phy_state);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
cfg = cfgs[ufs_phy->ufs_phy_state];
|
||
|
if (!cfg)
|
||
|
goto out;
|
||
|
|
||
|
for_each_phy_cfg(cfg) {
|
||
|
for_each_phy_lane(ufs_phy, i) {
|
||
|
samsung_ufs_phy_config(ufs_phy, cfg, i);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (ufs_phy->ufs_phy_state == CFG_POST_PWR_HS)
|
||
|
err = samsung_ufs_phy_wait_for_lock_acq(phy);
|
||
|
|
||
|
/**
|
||
|
* In Samsung ufshci, PHY need to be calibrated at different
|
||
|
* stages / state mainly before Linkstartup, after Linkstartup,
|
||
|
* before power mode change and after power mode change.
|
||
|
* Below state machine to make sure to calibrate PHY in each
|
||
|
* state. Here after configuring PHY in a given state, will
|
||
|
* change the state to next state so that next state phy
|
||
|
* calibration value can be programed
|
||
|
*/
|
||
|
out:
|
||
|
switch (ufs_phy->ufs_phy_state) {
|
||
|
case CFG_PRE_INIT:
|
||
|
ufs_phy->ufs_phy_state = CFG_POST_INIT;
|
||
|
break;
|
||
|
case CFG_POST_INIT:
|
||
|
ufs_phy->ufs_phy_state = CFG_PRE_PWR_HS;
|
||
|
break;
|
||
|
case CFG_PRE_PWR_HS:
|
||
|
ufs_phy->ufs_phy_state = CFG_POST_PWR_HS;
|
||
|
break;
|
||
|
case CFG_POST_PWR_HS:
|
||
|
/* Change back to INIT state */
|
||
|
ufs_phy->ufs_phy_state = CFG_PRE_INIT;
|
||
|
break;
|
||
|
default:
|
||
|
dev_err(ufs_phy->dev, "wrong state for phy calibration\n");
|
||
|
}
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static int samsung_ufs_phy_symbol_clk_init(struct samsung_ufs_phy *phy)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
phy->tx0_symbol_clk = devm_clk_get(phy->dev, "tx0_symbol_clk");
|
||
|
if (IS_ERR(phy->tx0_symbol_clk)) {
|
||
|
dev_err(phy->dev, "failed to get tx0_symbol_clk clock\n");
|
||
|
return PTR_ERR(phy->tx0_symbol_clk);
|
||
|
}
|
||
|
|
||
|
phy->rx0_symbol_clk = devm_clk_get(phy->dev, "rx0_symbol_clk");
|
||
|
if (IS_ERR(phy->rx0_symbol_clk)) {
|
||
|
dev_err(phy->dev, "failed to get rx0_symbol_clk clock\n");
|
||
|
return PTR_ERR(phy->rx0_symbol_clk);
|
||
|
}
|
||
|
|
||
|
phy->rx1_symbol_clk = devm_clk_get(phy->dev, "rx1_symbol_clk");
|
||
|
if (IS_ERR(phy->rx1_symbol_clk)) {
|
||
|
dev_err(phy->dev, "failed to get rx1_symbol_clk clock\n");
|
||
|
return PTR_ERR(phy->rx1_symbol_clk);
|
||
|
}
|
||
|
|
||
|
ret = clk_prepare_enable(phy->tx0_symbol_clk);
|
||
|
if (ret) {
|
||
|
dev_err(phy->dev, "%s: tx0_symbol_clk enable failed %d\n", __func__, ret);
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
ret = clk_prepare_enable(phy->rx0_symbol_clk);
|
||
|
if (ret) {
|
||
|
dev_err(phy->dev, "%s: rx0_symbol_clk enable failed %d\n", __func__, ret);
|
||
|
goto out_disable_tx0_clk;
|
||
|
}
|
||
|
|
||
|
ret = clk_prepare_enable(phy->rx1_symbol_clk);
|
||
|
if (ret) {
|
||
|
dev_err(phy->dev, "%s: rx1_symbol_clk enable failed %d\n", __func__, ret);
|
||
|
goto out_disable_rx0_clk;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
out_disable_rx0_clk:
|
||
|
clk_disable_unprepare(phy->rx0_symbol_clk);
|
||
|
out_disable_tx0_clk:
|
||
|
clk_disable_unprepare(phy->tx0_symbol_clk);
|
||
|
out:
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int samsung_ufs_phy_clks_init(struct samsung_ufs_phy *phy)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
phy->ref_clk = devm_clk_get(phy->dev, "ref_clk");
|
||
|
if (IS_ERR(phy->ref_clk))
|
||
|
dev_err(phy->dev, "failed to get ref_clk clock\n");
|
||
|
|
||
|
ret = clk_prepare_enable(phy->ref_clk);
|
||
|
if (ret) {
|
||
|
dev_err(phy->dev, "%s: ref_clk enable failed %d\n", __func__, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
dev_dbg(phy->dev, "UFS MPHY ref_clk_rate = %ld\n", clk_get_rate(phy->ref_clk));
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int samsung_ufs_phy_init(struct phy *phy)
|
||
|
{
|
||
|
struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
|
||
|
int ret;
|
||
|
|
||
|
ss_phy->lane_cnt = phy->attrs.bus_width;
|
||
|
ss_phy->ufs_phy_state = CFG_PRE_INIT;
|
||
|
|
||
|
if (ss_phy->drvdata->has_symbol_clk) {
|
||
|
ret = samsung_ufs_phy_symbol_clk_init(ss_phy);
|
||
|
if (ret)
|
||
|
dev_err(ss_phy->dev, "failed to set ufs phy symbol clocks\n");
|
||
|
}
|
||
|
|
||
|
ret = samsung_ufs_phy_clks_init(ss_phy);
|
||
|
if (ret)
|
||
|
dev_err(ss_phy->dev, "failed to set ufs phy clocks\n");
|
||
|
|
||
|
ret = samsung_ufs_phy_calibrate(phy);
|
||
|
if (ret)
|
||
|
dev_err(ss_phy->dev, "ufs phy calibration failed\n");
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int samsung_ufs_phy_power_on(struct phy *phy)
|
||
|
{
|
||
|
struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
|
||
|
|
||
|
samsung_ufs_phy_ctrl_isol(ss_phy, false);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int samsung_ufs_phy_power_off(struct phy *phy)
|
||
|
{
|
||
|
struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
|
||
|
|
||
|
samsung_ufs_phy_ctrl_isol(ss_phy, true);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int samsung_ufs_phy_set_mode(struct phy *generic_phy,
|
||
|
enum phy_mode mode, int submode)
|
||
|
{
|
||
|
struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(generic_phy);
|
||
|
|
||
|
ss_phy->mode = PHY_MODE_INVALID;
|
||
|
|
||
|
if (mode > 0)
|
||
|
ss_phy->mode = mode;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int samsung_ufs_phy_exit(struct phy *phy)
|
||
|
{
|
||
|
struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
|
||
|
|
||
|
clk_disable_unprepare(ss_phy->ref_clk);
|
||
|
|
||
|
if (ss_phy->drvdata->has_symbol_clk) {
|
||
|
clk_disable_unprepare(ss_phy->tx0_symbol_clk);
|
||
|
clk_disable_unprepare(ss_phy->rx0_symbol_clk);
|
||
|
clk_disable_unprepare(ss_phy->rx1_symbol_clk);
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct phy_ops samsung_ufs_phy_ops = {
|
||
|
.init = samsung_ufs_phy_init,
|
||
|
.exit = samsung_ufs_phy_exit,
|
||
|
.power_on = samsung_ufs_phy_power_on,
|
||
|
.power_off = samsung_ufs_phy_power_off,
|
||
|
.calibrate = samsung_ufs_phy_calibrate,
|
||
|
.set_mode = samsung_ufs_phy_set_mode,
|
||
|
.owner = THIS_MODULE,
|
||
|
};
|
||
|
|
||
|
static const struct of_device_id samsung_ufs_phy_match[];
|
||
|
|
||
|
static int samsung_ufs_phy_probe(struct platform_device *pdev)
|
||
|
{
|
||
|
struct device *dev = &pdev->dev;
|
||
|
const struct of_device_id *match;
|
||
|
struct samsung_ufs_phy *phy;
|
||
|
struct phy *gen_phy;
|
||
|
struct phy_provider *phy_provider;
|
||
|
const struct samsung_ufs_phy_drvdata *drvdata;
|
||
|
int err = 0;
|
||
|
|
||
|
match = of_match_node(samsung_ufs_phy_match, dev->of_node);
|
||
|
if (!match) {
|
||
|
err = -EINVAL;
|
||
|
dev_err(dev, "failed to get match_node\n");
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
||
|
if (!phy) {
|
||
|
err = -ENOMEM;
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
phy->reg_pma = devm_platform_ioremap_resource_byname(pdev, "phy-pma");
|
||
|
if (IS_ERR(phy->reg_pma)) {
|
||
|
err = PTR_ERR(phy->reg_pma);
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
phy->reg_pmu = syscon_regmap_lookup_by_phandle(
|
||
|
dev->of_node, "samsung,pmu-syscon");
|
||
|
if (IS_ERR(phy->reg_pmu)) {
|
||
|
err = PTR_ERR(phy->reg_pmu);
|
||
|
dev_err(dev, "failed syscon remap for pmu\n");
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
gen_phy = devm_phy_create(dev, NULL, &samsung_ufs_phy_ops);
|
||
|
if (IS_ERR(gen_phy)) {
|
||
|
err = PTR_ERR(gen_phy);
|
||
|
dev_err(dev, "failed to create PHY for ufs-phy\n");
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
drvdata = match->data;
|
||
|
phy->dev = dev;
|
||
|
phy->drvdata = drvdata;
|
||
|
phy->cfg = (struct samsung_ufs_phy_cfg **)drvdata->cfg;
|
||
|
phy->isol = &drvdata->isol;
|
||
|
phy->lane_cnt = PHY_DEF_LANE_CNT;
|
||
|
|
||
|
phy_set_drvdata(gen_phy, phy);
|
||
|
|
||
|
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
||
|
if (IS_ERR(phy_provider)) {
|
||
|
err = PTR_ERR(phy_provider);
|
||
|
dev_err(dev, "failed to register phy-provider\n");
|
||
|
goto out;
|
||
|
}
|
||
|
out:
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static const struct of_device_id samsung_ufs_phy_match[] = {
|
||
|
{
|
||
|
.compatible = "samsung,exynos7-ufs-phy",
|
||
|
.data = &exynos7_ufs_phy,
|
||
|
}, {
|
||
|
.compatible = "samsung,exynosautov9-ufs-phy",
|
||
|
.data = &exynosautov9_ufs_phy,
|
||
|
},
|
||
|
{},
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(of, samsung_ufs_phy_match);
|
||
|
|
||
|
static struct platform_driver samsung_ufs_phy_driver = {
|
||
|
.probe = samsung_ufs_phy_probe,
|
||
|
.driver = {
|
||
|
.name = "samsung-ufs-phy",
|
||
|
.of_match_table = samsung_ufs_phy_match,
|
||
|
},
|
||
|
};
|
||
|
module_platform_driver(samsung_ufs_phy_driver);
|
||
|
MODULE_DESCRIPTION("Samsung SoC UFS PHY Driver");
|
||
|
MODULE_AUTHOR("Seungwon Jeon <essuuj@gmail.com>");
|
||
|
MODULE_AUTHOR("Alim Akhtar <alim.akhtar@samsung.com>");
|
||
|
MODULE_LICENSE("GPL v2");
|