635 lines
16 KiB
C
635 lines
16 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
/*
|
||
|
* R-Car Gen3 Clock Pulse Generator
|
||
|
*
|
||
|
* Copyright (C) 2015-2018 Glider bvba
|
||
|
* Copyright (C) 2019 Renesas Electronics Corp.
|
||
|
*
|
||
|
* Based on clk-rcar-gen3.c
|
||
|
*
|
||
|
* Copyright (C) 2015 Renesas Electronics Corp.
|
||
|
*/
|
||
|
|
||
|
#include <linux/bug.h>
|
||
|
#include <linux/bitfield.h>
|
||
|
#include <linux/clk.h>
|
||
|
#include <linux/clk-provider.h>
|
||
|
#include <linux/device.h>
|
||
|
#include <linux/err.h>
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/io.h>
|
||
|
#include <linux/pm.h>
|
||
|
#include <linux/slab.h>
|
||
|
#include <linux/sys_soc.h>
|
||
|
|
||
|
#include "renesas-cpg-mssr.h"
|
||
|
#include "rcar-cpg-lib.h"
|
||
|
#include "rcar-gen3-cpg.h"
|
||
|
|
||
|
#define CPG_PLLECR 0x00d0 /* PLL Enable Control Register */
|
||
|
|
||
|
#define CPG_PLLECR_PLLST(n) BIT(8 + (n)) /* PLLn Circuit Status */
|
||
|
|
||
|
#define CPG_PLL0CR 0x00d8 /* PLLn Control Registers */
|
||
|
#define CPG_PLL2CR 0x002c
|
||
|
#define CPG_PLL4CR 0x01f4
|
||
|
|
||
|
#define CPG_PLLnCR_STC_MASK GENMASK(30, 24) /* PLL Circuit Mult. Ratio */
|
||
|
|
||
|
#define CPG_RCKCR_CKSEL BIT(15) /* RCLK Clock Source Select */
|
||
|
|
||
|
/* PLL Clocks */
|
||
|
struct cpg_pll_clk {
|
||
|
struct clk_hw hw;
|
||
|
void __iomem *pllcr_reg;
|
||
|
void __iomem *pllecr_reg;
|
||
|
unsigned int fixed_mult;
|
||
|
u32 pllecr_pllst_mask;
|
||
|
};
|
||
|
|
||
|
#define to_pll_clk(_hw) container_of(_hw, struct cpg_pll_clk, hw)
|
||
|
|
||
|
static unsigned long cpg_pll_clk_recalc_rate(struct clk_hw *hw,
|
||
|
unsigned long parent_rate)
|
||
|
{
|
||
|
struct cpg_pll_clk *pll_clk = to_pll_clk(hw);
|
||
|
unsigned int mult;
|
||
|
u32 val;
|
||
|
|
||
|
val = readl(pll_clk->pllcr_reg) & CPG_PLLnCR_STC_MASK;
|
||
|
mult = (val >> __ffs(CPG_PLLnCR_STC_MASK)) + 1;
|
||
|
|
||
|
return parent_rate * mult * pll_clk->fixed_mult;
|
||
|
}
|
||
|
|
||
|
static int cpg_pll_clk_determine_rate(struct clk_hw *hw,
|
||
|
struct clk_rate_request *req)
|
||
|
{
|
||
|
struct cpg_pll_clk *pll_clk = to_pll_clk(hw);
|
||
|
unsigned int min_mult, max_mult, mult;
|
||
|
unsigned long prate;
|
||
|
|
||
|
prate = req->best_parent_rate * pll_clk->fixed_mult;
|
||
|
min_mult = max(div64_ul(req->min_rate, prate), 1ULL);
|
||
|
max_mult = min(div64_ul(req->max_rate, prate), 128ULL);
|
||
|
if (max_mult < min_mult)
|
||
|
return -EINVAL;
|
||
|
|
||
|
mult = DIV_ROUND_CLOSEST_ULL(req->rate, prate);
|
||
|
mult = clamp(mult, min_mult, max_mult);
|
||
|
|
||
|
req->rate = prate * mult;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int cpg_pll_clk_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
|
unsigned long parent_rate)
|
||
|
{
|
||
|
struct cpg_pll_clk *pll_clk = to_pll_clk(hw);
|
||
|
unsigned int mult, i;
|
||
|
u32 val;
|
||
|
|
||
|
mult = DIV_ROUND_CLOSEST_ULL(rate, parent_rate * pll_clk->fixed_mult);
|
||
|
mult = clamp(mult, 1U, 128U);
|
||
|
|
||
|
val = readl(pll_clk->pllcr_reg);
|
||
|
val &= ~CPG_PLLnCR_STC_MASK;
|
||
|
val |= (mult - 1) << __ffs(CPG_PLLnCR_STC_MASK);
|
||
|
writel(val, pll_clk->pllcr_reg);
|
||
|
|
||
|
for (i = 1000; i; i--) {
|
||
|
if (readl(pll_clk->pllecr_reg) & pll_clk->pllecr_pllst_mask)
|
||
|
return 0;
|
||
|
|
||
|
cpu_relax();
|
||
|
}
|
||
|
|
||
|
return -ETIMEDOUT;
|
||
|
}
|
||
|
|
||
|
static const struct clk_ops cpg_pll_clk_ops = {
|
||
|
.recalc_rate = cpg_pll_clk_recalc_rate,
|
||
|
.determine_rate = cpg_pll_clk_determine_rate,
|
||
|
.set_rate = cpg_pll_clk_set_rate,
|
||
|
};
|
||
|
|
||
|
static struct clk * __init cpg_pll_clk_register(const char *name,
|
||
|
const char *parent_name,
|
||
|
void __iomem *base,
|
||
|
unsigned int mult,
|
||
|
unsigned int offset,
|
||
|
unsigned int index)
|
||
|
|
||
|
{
|
||
|
struct cpg_pll_clk *pll_clk;
|
||
|
struct clk_init_data init = {};
|
||
|
struct clk *clk;
|
||
|
|
||
|
pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
|
||
|
if (!pll_clk)
|
||
|
return ERR_PTR(-ENOMEM);
|
||
|
|
||
|
init.name = name;
|
||
|
init.ops = &cpg_pll_clk_ops;
|
||
|
init.parent_names = &parent_name;
|
||
|
init.num_parents = 1;
|
||
|
|
||
|
pll_clk->hw.init = &init;
|
||
|
pll_clk->pllcr_reg = base + offset;
|
||
|
pll_clk->pllecr_reg = base + CPG_PLLECR;
|
||
|
pll_clk->fixed_mult = mult; /* PLL refclk x (setting + 1) x mult */
|
||
|
pll_clk->pllecr_pllst_mask = CPG_PLLECR_PLLST(index);
|
||
|
|
||
|
clk = clk_register(NULL, &pll_clk->hw);
|
||
|
if (IS_ERR(clk))
|
||
|
kfree(pll_clk);
|
||
|
|
||
|
return clk;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Z Clock & Z2 Clock
|
||
|
*
|
||
|
* Traits of this clock:
|
||
|
* prepare - clk_prepare only ensures that parents are prepared
|
||
|
* enable - clk_enable only ensures that parents are enabled
|
||
|
* rate - rate is adjustable.
|
||
|
* clk->rate = (parent->rate * mult / 32 ) / fixed_div
|
||
|
* parent - fixed parent. No clk_set_parent support
|
||
|
*/
|
||
|
#define CPG_FRQCRB 0x00000004
|
||
|
#define CPG_FRQCRB_KICK BIT(31)
|
||
|
#define CPG_FRQCRC 0x000000e0
|
||
|
|
||
|
struct cpg_z_clk {
|
||
|
struct clk_hw hw;
|
||
|
void __iomem *reg;
|
||
|
void __iomem *kick_reg;
|
||
|
unsigned long max_rate; /* Maximum rate for normal mode */
|
||
|
unsigned int fixed_div;
|
||
|
u32 mask;
|
||
|
};
|
||
|
|
||
|
#define to_z_clk(_hw) container_of(_hw, struct cpg_z_clk, hw)
|
||
|
|
||
|
static unsigned long cpg_z_clk_recalc_rate(struct clk_hw *hw,
|
||
|
unsigned long parent_rate)
|
||
|
{
|
||
|
struct cpg_z_clk *zclk = to_z_clk(hw);
|
||
|
unsigned int mult;
|
||
|
u32 val;
|
||
|
|
||
|
val = readl(zclk->reg) & zclk->mask;
|
||
|
mult = 32 - (val >> __ffs(zclk->mask));
|
||
|
|
||
|
return DIV_ROUND_CLOSEST_ULL((u64)parent_rate * mult,
|
||
|
32 * zclk->fixed_div);
|
||
|
}
|
||
|
|
||
|
static int cpg_z_clk_determine_rate(struct clk_hw *hw,
|
||
|
struct clk_rate_request *req)
|
||
|
{
|
||
|
struct cpg_z_clk *zclk = to_z_clk(hw);
|
||
|
unsigned int min_mult, max_mult, mult;
|
||
|
unsigned long rate, prate;
|
||
|
|
||
|
rate = min(req->rate, req->max_rate);
|
||
|
if (rate <= zclk->max_rate) {
|
||
|
/* Set parent rate to initial value for normal modes */
|
||
|
prate = zclk->max_rate;
|
||
|
} else {
|
||
|
/* Set increased parent rate for boost modes */
|
||
|
prate = rate;
|
||
|
}
|
||
|
req->best_parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw),
|
||
|
prate * zclk->fixed_div);
|
||
|
|
||
|
prate = req->best_parent_rate / zclk->fixed_div;
|
||
|
min_mult = max(div64_ul(req->min_rate * 32ULL, prate), 1ULL);
|
||
|
max_mult = min(div64_ul(req->max_rate * 32ULL, prate), 32ULL);
|
||
|
if (max_mult < min_mult)
|
||
|
return -EINVAL;
|
||
|
|
||
|
mult = DIV_ROUND_CLOSEST_ULL(rate * 32ULL, prate);
|
||
|
mult = clamp(mult, min_mult, max_mult);
|
||
|
|
||
|
req->rate = DIV_ROUND_CLOSEST_ULL((u64)prate * mult, 32);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
|
unsigned long parent_rate)
|
||
|
{
|
||
|
struct cpg_z_clk *zclk = to_z_clk(hw);
|
||
|
unsigned int mult;
|
||
|
unsigned int i;
|
||
|
|
||
|
mult = DIV64_U64_ROUND_CLOSEST(rate * 32ULL * zclk->fixed_div,
|
||
|
parent_rate);
|
||
|
mult = clamp(mult, 1U, 32U);
|
||
|
|
||
|
if (readl(zclk->kick_reg) & CPG_FRQCRB_KICK)
|
||
|
return -EBUSY;
|
||
|
|
||
|
cpg_reg_modify(zclk->reg, zclk->mask, (32 - mult) << __ffs(zclk->mask));
|
||
|
|
||
|
/*
|
||
|
* Set KICK bit in FRQCRB to update hardware setting and wait for
|
||
|
* clock change completion.
|
||
|
*/
|
||
|
cpg_reg_modify(zclk->kick_reg, 0, CPG_FRQCRB_KICK);
|
||
|
|
||
|
/*
|
||
|
* Note: There is no HW information about the worst case latency.
|
||
|
*
|
||
|
* Using experimental measurements, it seems that no more than
|
||
|
* ~10 iterations are needed, independently of the CPU rate.
|
||
|
* Since this value might be dependent on external xtal rate, pll1
|
||
|
* rate or even the other emulation clocks rate, use 1000 as a
|
||
|
* "super" safe value.
|
||
|
*/
|
||
|
for (i = 1000; i; i--) {
|
||
|
if (!(readl(zclk->kick_reg) & CPG_FRQCRB_KICK))
|
||
|
return 0;
|
||
|
|
||
|
cpu_relax();
|
||
|
}
|
||
|
|
||
|
return -ETIMEDOUT;
|
||
|
}
|
||
|
|
||
|
static const struct clk_ops cpg_z_clk_ops = {
|
||
|
.recalc_rate = cpg_z_clk_recalc_rate,
|
||
|
.determine_rate = cpg_z_clk_determine_rate,
|
||
|
.set_rate = cpg_z_clk_set_rate,
|
||
|
};
|
||
|
|
||
|
static struct clk * __init cpg_z_clk_register(const char *name,
|
||
|
const char *parent_name,
|
||
|
void __iomem *reg,
|
||
|
unsigned int div,
|
||
|
unsigned int offset)
|
||
|
{
|
||
|
struct clk_init_data init = {};
|
||
|
struct cpg_z_clk *zclk;
|
||
|
struct clk *clk;
|
||
|
|
||
|
zclk = kzalloc(sizeof(*zclk), GFP_KERNEL);
|
||
|
if (!zclk)
|
||
|
return ERR_PTR(-ENOMEM);
|
||
|
|
||
|
init.name = name;
|
||
|
init.ops = &cpg_z_clk_ops;
|
||
|
init.flags = CLK_SET_RATE_PARENT;
|
||
|
init.parent_names = &parent_name;
|
||
|
init.num_parents = 1;
|
||
|
|
||
|
zclk->reg = reg + CPG_FRQCRC;
|
||
|
zclk->kick_reg = reg + CPG_FRQCRB;
|
||
|
zclk->hw.init = &init;
|
||
|
zclk->mask = GENMASK(offset + 4, offset);
|
||
|
zclk->fixed_div = div; /* PLLVCO x 1/div x SYS-CPU divider */
|
||
|
|
||
|
clk = clk_register(NULL, &zclk->hw);
|
||
|
if (IS_ERR(clk)) {
|
||
|
kfree(zclk);
|
||
|
return clk;
|
||
|
}
|
||
|
|
||
|
zclk->max_rate = clk_hw_get_rate(clk_hw_get_parent(&zclk->hw)) /
|
||
|
zclk->fixed_div;
|
||
|
return clk;
|
||
|
}
|
||
|
|
||
|
struct rpc_clock {
|
||
|
struct clk_divider div;
|
||
|
struct clk_gate gate;
|
||
|
/*
|
||
|
* One notifier covers both RPC and RPCD2 clocks as they are both
|
||
|
* controlled by the same RPCCKCR register...
|
||
|
*/
|
||
|
struct cpg_simple_notifier csn;
|
||
|
};
|
||
|
|
||
|
static const struct clk_div_table cpg_rpcsrc_div_table[] = {
|
||
|
{ 2, 5 }, { 3, 6 }, { 0, 0 },
|
||
|
};
|
||
|
|
||
|
static const struct clk_div_table cpg_rpc_div_table[] = {
|
||
|
{ 1, 2 }, { 3, 4 }, { 5, 6 }, { 7, 8 }, { 0, 0 },
|
||
|
};
|
||
|
|
||
|
static struct clk * __init cpg_rpc_clk_register(const char *name,
|
||
|
void __iomem *base, const char *parent_name,
|
||
|
struct raw_notifier_head *notifiers)
|
||
|
{
|
||
|
struct rpc_clock *rpc;
|
||
|
struct clk *clk;
|
||
|
|
||
|
rpc = kzalloc(sizeof(*rpc), GFP_KERNEL);
|
||
|
if (!rpc)
|
||
|
return ERR_PTR(-ENOMEM);
|
||
|
|
||
|
rpc->div.reg = base + CPG_RPCCKCR;
|
||
|
rpc->div.width = 3;
|
||
|
rpc->div.table = cpg_rpc_div_table;
|
||
|
rpc->div.lock = &cpg_lock;
|
||
|
|
||
|
rpc->gate.reg = base + CPG_RPCCKCR;
|
||
|
rpc->gate.bit_idx = 8;
|
||
|
rpc->gate.flags = CLK_GATE_SET_TO_DISABLE;
|
||
|
rpc->gate.lock = &cpg_lock;
|
||
|
|
||
|
rpc->csn.reg = base + CPG_RPCCKCR;
|
||
|
|
||
|
clk = clk_register_composite(NULL, name, &parent_name, 1, NULL, NULL,
|
||
|
&rpc->div.hw, &clk_divider_ops,
|
||
|
&rpc->gate.hw, &clk_gate_ops,
|
||
|
CLK_SET_RATE_PARENT);
|
||
|
if (IS_ERR(clk)) {
|
||
|
kfree(rpc);
|
||
|
return clk;
|
||
|
}
|
||
|
|
||
|
cpg_simple_notifier_register(notifiers, &rpc->csn);
|
||
|
return clk;
|
||
|
}
|
||
|
|
||
|
struct rpcd2_clock {
|
||
|
struct clk_fixed_factor fixed;
|
||
|
struct clk_gate gate;
|
||
|
};
|
||
|
|
||
|
static struct clk * __init cpg_rpcd2_clk_register(const char *name,
|
||
|
void __iomem *base,
|
||
|
const char *parent_name)
|
||
|
{
|
||
|
struct rpcd2_clock *rpcd2;
|
||
|
struct clk *clk;
|
||
|
|
||
|
rpcd2 = kzalloc(sizeof(*rpcd2), GFP_KERNEL);
|
||
|
if (!rpcd2)
|
||
|
return ERR_PTR(-ENOMEM);
|
||
|
|
||
|
rpcd2->fixed.mult = 1;
|
||
|
rpcd2->fixed.div = 2;
|
||
|
|
||
|
rpcd2->gate.reg = base + CPG_RPCCKCR;
|
||
|
rpcd2->gate.bit_idx = 9;
|
||
|
rpcd2->gate.flags = CLK_GATE_SET_TO_DISABLE;
|
||
|
rpcd2->gate.lock = &cpg_lock;
|
||
|
|
||
|
clk = clk_register_composite(NULL, name, &parent_name, 1, NULL, NULL,
|
||
|
&rpcd2->fixed.hw, &clk_fixed_factor_ops,
|
||
|
&rpcd2->gate.hw, &clk_gate_ops,
|
||
|
CLK_SET_RATE_PARENT);
|
||
|
if (IS_ERR(clk))
|
||
|
kfree(rpcd2);
|
||
|
|
||
|
return clk;
|
||
|
}
|
||
|
|
||
|
|
||
|
static const struct rcar_gen3_cpg_pll_config *cpg_pll_config __initdata;
|
||
|
static unsigned int cpg_clk_extalr __initdata;
|
||
|
static u32 cpg_mode __initdata;
|
||
|
static u32 cpg_quirks __initdata;
|
||
|
|
||
|
#define PLL_ERRATA BIT(0) /* Missing PLL0/2/4 post-divider */
|
||
|
#define RCKCR_CKSEL BIT(1) /* Manual RCLK parent selection */
|
||
|
#define SD_SKIP_FIRST BIT(2) /* Skip first clock in SD table */
|
||
|
|
||
|
|
||
|
static const struct soc_device_attribute cpg_quirks_match[] __initconst = {
|
||
|
{
|
||
|
.soc_id = "r8a7795", .revision = "ES1.0",
|
||
|
.data = (void *)(PLL_ERRATA | RCKCR_CKSEL | SD_SKIP_FIRST),
|
||
|
},
|
||
|
{
|
||
|
.soc_id = "r8a7795", .revision = "ES1.*",
|
||
|
.data = (void *)(RCKCR_CKSEL | SD_SKIP_FIRST),
|
||
|
},
|
||
|
{
|
||
|
.soc_id = "r8a7795", .revision = "ES2.0",
|
||
|
.data = (void *)SD_SKIP_FIRST,
|
||
|
},
|
||
|
{
|
||
|
.soc_id = "r8a7796", .revision = "ES1.0",
|
||
|
.data = (void *)(RCKCR_CKSEL | SD_SKIP_FIRST),
|
||
|
},
|
||
|
{
|
||
|
.soc_id = "r8a7796", .revision = "ES1.1",
|
||
|
.data = (void *)SD_SKIP_FIRST,
|
||
|
},
|
||
|
{ /* sentinel */ }
|
||
|
};
|
||
|
|
||
|
struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
|
||
|
const struct cpg_core_clk *core, const struct cpg_mssr_info *info,
|
||
|
struct clk **clks, void __iomem *base,
|
||
|
struct raw_notifier_head *notifiers)
|
||
|
{
|
||
|
const struct clk *parent;
|
||
|
unsigned int mult = 1;
|
||
|
unsigned int div = 1;
|
||
|
u32 value;
|
||
|
|
||
|
parent = clks[core->parent & 0xffff]; /* some types use high bits */
|
||
|
if (IS_ERR(parent))
|
||
|
return ERR_CAST(parent);
|
||
|
|
||
|
switch (core->type) {
|
||
|
case CLK_TYPE_GEN3_MAIN:
|
||
|
div = cpg_pll_config->extal_div;
|
||
|
break;
|
||
|
|
||
|
case CLK_TYPE_GEN3_PLL0:
|
||
|
/*
|
||
|
* PLL0 is implemented as a custom clock, to change the
|
||
|
* multiplier when cpufreq changes between normal and boost
|
||
|
* modes.
|
||
|
*/
|
||
|
mult = (cpg_quirks & PLL_ERRATA) ? 4 : 2;
|
||
|
return cpg_pll_clk_register(core->name, __clk_get_name(parent),
|
||
|
base, mult, CPG_PLL0CR, 0);
|
||
|
|
||
|
case CLK_TYPE_GEN3_PLL1:
|
||
|
mult = cpg_pll_config->pll1_mult;
|
||
|
div = cpg_pll_config->pll1_div;
|
||
|
break;
|
||
|
|
||
|
case CLK_TYPE_GEN3_PLL2:
|
||
|
/*
|
||
|
* PLL2 is implemented as a custom clock, to change the
|
||
|
* multiplier when cpufreq changes between normal and boost
|
||
|
* modes.
|
||
|
*/
|
||
|
mult = (cpg_quirks & PLL_ERRATA) ? 4 : 2;
|
||
|
return cpg_pll_clk_register(core->name, __clk_get_name(parent),
|
||
|
base, mult, CPG_PLL2CR, 2);
|
||
|
|
||
|
case CLK_TYPE_GEN3_PLL3:
|
||
|
mult = cpg_pll_config->pll3_mult;
|
||
|
div = cpg_pll_config->pll3_div;
|
||
|
break;
|
||
|
|
||
|
case CLK_TYPE_GEN3_PLL4:
|
||
|
/*
|
||
|
* PLL4 is a configurable multiplier clock. Register it as a
|
||
|
* fixed factor clock for now as there's no generic multiplier
|
||
|
* clock implementation and we currently have no need to change
|
||
|
* the multiplier value.
|
||
|
*/
|
||
|
value = readl(base + CPG_PLL4CR);
|
||
|
mult = (((value >> 24) & 0x7f) + 1) * 2;
|
||
|
if (cpg_quirks & PLL_ERRATA)
|
||
|
mult *= 2;
|
||
|
break;
|
||
|
|
||
|
case CLK_TYPE_GEN3_SD:
|
||
|
return cpg_sd_clk_register(core->name, base, core->offset,
|
||
|
__clk_get_name(parent), notifiers,
|
||
|
cpg_quirks & SD_SKIP_FIRST);
|
||
|
|
||
|
case CLK_TYPE_GEN3_R:
|
||
|
if (cpg_quirks & RCKCR_CKSEL) {
|
||
|
struct cpg_simple_notifier *csn;
|
||
|
|
||
|
csn = kzalloc(sizeof(*csn), GFP_KERNEL);
|
||
|
if (!csn)
|
||
|
return ERR_PTR(-ENOMEM);
|
||
|
|
||
|
csn->reg = base + CPG_RCKCR;
|
||
|
|
||
|
/*
|
||
|
* RINT is default.
|
||
|
* Only if EXTALR is populated, we switch to it.
|
||
|
*/
|
||
|
value = readl(csn->reg) & 0x3f;
|
||
|
|
||
|
if (clk_get_rate(clks[cpg_clk_extalr])) {
|
||
|
parent = clks[cpg_clk_extalr];
|
||
|
value |= CPG_RCKCR_CKSEL;
|
||
|
}
|
||
|
|
||
|
writel(value, csn->reg);
|
||
|
cpg_simple_notifier_register(notifiers, csn);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
/* Select parent clock of RCLK by MD28 */
|
||
|
if (cpg_mode & BIT(28))
|
||
|
parent = clks[cpg_clk_extalr];
|
||
|
break;
|
||
|
|
||
|
case CLK_TYPE_GEN3_MDSEL:
|
||
|
/*
|
||
|
* Clock selectable between two parents and two fixed dividers
|
||
|
* using a mode pin
|
||
|
*/
|
||
|
if (cpg_mode & BIT(core->offset)) {
|
||
|
div = core->div & 0xffff;
|
||
|
} else {
|
||
|
parent = clks[core->parent >> 16];
|
||
|
if (IS_ERR(parent))
|
||
|
return ERR_CAST(parent);
|
||
|
div = core->div >> 16;
|
||
|
}
|
||
|
mult = 1;
|
||
|
break;
|
||
|
|
||
|
case CLK_TYPE_GEN3_Z:
|
||
|
return cpg_z_clk_register(core->name, __clk_get_name(parent),
|
||
|
base, core->div, core->offset);
|
||
|
|
||
|
case CLK_TYPE_GEN3_OSC:
|
||
|
/*
|
||
|
* Clock combining OSC EXTAL predivider and a fixed divider
|
||
|
*/
|
||
|
div = cpg_pll_config->osc_prediv * core->div;
|
||
|
break;
|
||
|
|
||
|
case CLK_TYPE_GEN3_RCKSEL:
|
||
|
/*
|
||
|
* Clock selectable between two parents and two fixed dividers
|
||
|
* using RCKCR.CKSEL
|
||
|
*/
|
||
|
if (readl(base + CPG_RCKCR) & CPG_RCKCR_CKSEL) {
|
||
|
div = core->div & 0xffff;
|
||
|
} else {
|
||
|
parent = clks[core->parent >> 16];
|
||
|
if (IS_ERR(parent))
|
||
|
return ERR_CAST(parent);
|
||
|
div = core->div >> 16;
|
||
|
}
|
||
|
break;
|
||
|
|
||
|
case CLK_TYPE_GEN3_RPCSRC:
|
||
|
return clk_register_divider_table(NULL, core->name,
|
||
|
__clk_get_name(parent), 0,
|
||
|
base + CPG_RPCCKCR, 3, 2, 0,
|
||
|
cpg_rpcsrc_div_table,
|
||
|
&cpg_lock);
|
||
|
|
||
|
case CLK_TYPE_GEN3_E3_RPCSRC:
|
||
|
/*
|
||
|
* Register RPCSRC as fixed factor clock based on the
|
||
|
* MD[4:1] pins and CPG_RPCCKCR[4:3] register value for
|
||
|
* which has been set prior to booting the kernel.
|
||
|
*/
|
||
|
value = (readl(base + CPG_RPCCKCR) & GENMASK(4, 3)) >> 3;
|
||
|
|
||
|
switch (value) {
|
||
|
case 0:
|
||
|
div = 5;
|
||
|
break;
|
||
|
case 1:
|
||
|
div = 3;
|
||
|
break;
|
||
|
case 2:
|
||
|
parent = clks[core->parent >> 16];
|
||
|
if (IS_ERR(parent))
|
||
|
return ERR_CAST(parent);
|
||
|
div = core->div;
|
||
|
break;
|
||
|
case 3:
|
||
|
default:
|
||
|
div = 2;
|
||
|
break;
|
||
|
}
|
||
|
break;
|
||
|
|
||
|
case CLK_TYPE_GEN3_RPC:
|
||
|
return cpg_rpc_clk_register(core->name, base,
|
||
|
__clk_get_name(parent), notifiers);
|
||
|
|
||
|
case CLK_TYPE_GEN3_RPCD2:
|
||
|
return cpg_rpcd2_clk_register(core->name, base,
|
||
|
__clk_get_name(parent));
|
||
|
|
||
|
default:
|
||
|
return ERR_PTR(-EINVAL);
|
||
|
}
|
||
|
|
||
|
return clk_register_fixed_factor(NULL, core->name,
|
||
|
__clk_get_name(parent), 0, mult, div);
|
||
|
}
|
||
|
|
||
|
int __init rcar_gen3_cpg_init(const struct rcar_gen3_cpg_pll_config *config,
|
||
|
unsigned int clk_extalr, u32 mode)
|
||
|
{
|
||
|
const struct soc_device_attribute *attr;
|
||
|
|
||
|
cpg_pll_config = config;
|
||
|
cpg_clk_extalr = clk_extalr;
|
||
|
cpg_mode = mode;
|
||
|
attr = soc_device_match(cpg_quirks_match);
|
||
|
if (attr)
|
||
|
cpg_quirks = (uintptr_t)attr->data;
|
||
|
pr_debug("%s: mode = 0x%x quirks = 0x%x\n", __func__, mode, cpg_quirks);
|
||
|
|
||
|
spin_lock_init(&cpg_lock);
|
||
|
|
||
|
return 0;
|
||
|
}
|