* update intel-ipsec to v1.1
* Update portfile.cmake, correct the install file path
* Add more double quotes
* Revert changes about double quotes
* version
* [intel-ipsec] Overhaul/modernize port.
* Remove CMakeLists.txt replacement that was a fancy way to say vcpkg_from_make/vcpkg_from_nmake.
* Convert support messages into a "supports" expression.
* Fix Windows.
* Correct CMake config handling of release/debug static/shared and Windows.
* Remove attempt to copy nonexistent PDBs.
* Apply CR feedback from Nicole and dg0yt
* Add if(TARGET
* Update always-generate-PDB patch with the version actually merged upstream.
Co-authored-by: Mengna-Li <you@example.com>
Co-authored-by: JackBoosY <yuzaiyang@beyondsoft.com>
The only places this was being used were as morally asserts for the port itself. Also removed empty ports from ci.baseline.txt.
In support of https://github.com/microsoft/vcpkg/pull/21502
vcpkg.json and portfile.cmake disagreed.
vcpkg.json: windows & x64 & !static
portfile: !linux & !osx & !uwp & !x86
Also ci.baseline.txt has:
libfabric:arm-uwp=fail
libfabric:x64-linux=fail
libfabric:x64-osx=fail
libfabric:x64-uwp=fail
libfabric:x64-windows-static=fail
libfabric:x64-windows-static-md=fail
I'm assuming "windows" means the same as !linux & !osx.
I'm assuming "x64" is intended to be the same as "!x86" given the ci.baseline.txt entries.
This means we need to add !uwp.
In support of https://github.com/microsoft/vcpkg/pull/21502
* [zkpp] Remove vcpkg_fail_port_install.
There was no supports expression before, and there is ci.baseline.txt impact.
In support of https://github.com/microsoft/vcpkg/pull/21502
* Fix flipped sense.
There was no supports expression, and there was ci.baseline.txt impact. The remaining ci.baseline.txt line item was x86-windows, so I tried building that. It results in:
```
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(201): error C3861: '_InterlockedExchange64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(202): error C3861: '_InterlockedExchangeAdd64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(203): error C3861: '_InterlockedExchangeAdd64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(204): error C3861: '_InterlockedExchangeAdd64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(205): error C3861: '_InterlockedExchangeAdd64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(206): error C3861: '_InterlockedOr64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(207): error C3861: '_InterlockedAnd64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(208): error C3861: '_InterlockedXor64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(209): error C3861: '_InterlockedExchange64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(216): error C3861: '_InterlockedExchange64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(217): error C3861: '_InterlockedExchangeAdd64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(218): error C3861: '_InterlockedExchangeAdd64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(219): error C3861: '_InterlockedExchangeAdd64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(220): error C3861: '_InterlockedExchangeAdd64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(221): error C3861: '_InterlockedOr64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(222): error C3861: '_InterlockedAnd64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(223): error C3861: '_InterlockedXor64_INLINE': identifier not found
C:\Dev\vcpkg2\buildtrees\eathread\src\f21f15bafd-3f7f4715f1.clean\include\eathread/internal/eathread_atomic_standalone_msvc.h(224): error C3861: '_InterlockedExchange64_INLINE': identifier not found
```
which is a build failure in the port, not a CI artifact, so I added that to "supports" as well.
In support of https://github.com/microsoft/vcpkg/pull/21502
* [bullet3] Remove vcpkg_fail_port_install.
The supports expression and the portfile.cmake disagreed.
Supports: !((windows | linux) & (arm | uwp))
Portfile: osx | !(arm | arm64 | uwp)
If we demorgan the supports expression we get something closer to the portfile:
!(windows | linux) | !(arm | uwp)
If we take "!(windows | linux)" to mean that the author meant "osx", and assume arm64 implies arm, we end up with:
osx | !(arm | uwp)
In support of: https://github.com/microsoft/vcpkg/pull/21502
* Also remove ci.baseline.txt entries now covered by vcpkg.json.
* Update bootstrap.ps1 to properly support arm64
* Add tls12-download-arm64 from 2021-12-09 release
* Add reference to tls12-download-arm64 back in
* Update scripts/bootstrap.ps1
Revert back to x86 downloader
Co-authored-by: nicole mazzuca <83086508+strega-nil-ms@users.noreply.github.com>
* Revert "Add tls12-download-arm64 from 2021-12-09 release"
This reverts commit 26273191d29663a2144f4c71f8e3e71e3e30dbbd.
Co-authored-by: nicole mazzuca <83086508+strega-nil-ms@users.noreply.github.com>
* unrar only support windows
* update
* update
* mdnsresponder only support windows
* --amend
* add !uwp to supports
* add !arm64 to supports
* Update ports/mdnsresponder/vcpkg.json
Co-authored-by: nicole mazzuca <83086508+strega-nil-ms@users.noreply.github.com>
* [dimcli] Add supports field instead of written in ci.baseline, disable testing
* version
* Fix build on Windows
* version
* fix build on osx
Co-authored-by: nicole mazzuca <mazzucan@outlook.com>
* [gherkin-c] Fix UNIX build, fix install path
* version
* manifest
* version
* should be a `-` not an `_`
Co-authored-by: nicole mazzuca <mazzucan@outlook.com>
The `uuid/uuid.h` header conflicts with system libraries on osx; some system headers include `<uuid/uuid.h>`, intending to get the macOS system headers.
* z_vcpkg_get_cmake_vars(): Use build-type-specific cache variable
if VCPKG_BUILD_TYPE is defined
Some ports (e.g. gettext) execute debug and release builds manually
(with different options). If a globally cached copy of cmake vars file
is used, the second build type has no cmake vars defined (e.g. CFLAGS is empty)
because generated and globally cached cmake vars file includes only cmake vars
for the first build type
* Apply suggestions from code review
Co-authored-by: nicole mazzuca <83086508+strega-nil-ms@users.noreply.github.com>
Co-authored-by: nicole mazzuca <83086508+strega-nil-ms@users.noreply.github.com>
* fixed 22434
* Clean baseline
* update version
* version
* add supports field since the upstream doesn't support uwp
* improve code
* version
* version
Co-authored-by: JackBoosY <yuzaiyang@beyondsoft.com>
* [scripts] update scripts
* [boost-*] generate ports
* update versions
* [scripts] update boost version in boost-modular-headers.cmake
* [scripts] add post source stubs for boost-json and boost-nowide ports and re-generate Boost ports
* update versions
* [boost-asio] make OpenSSL optional #20718
* update versions
* [boost] [boost-mpi] [boost-python] disable python for iOS and Android, fixes#21474
* update versions
* [boost-fiber] add NUMA support, fixes#16507
* update version
* [boost-build] apply patch https://github.com/bfgroup/b2/pull/113 for fix build boost-fiber and boost-stacktrace
* update version
* [boost-atomic] fix compilation for uwp
* update version
* ignore mapnik's fail on arm64-windows
* [boost-python] support ARM on Windows
* update versions
* Boost features testing within CI
* [boost-modular-build-helper] fix boost_python file name in Jamroot.jam
* [boost-mpi] fix build with python2 or python3
* update versions
* [boost-fiber] fix build with numa=on
* update version
* [boost-multiprecision] fix build with MSVC on ARM
* update version
* [boost-mpi] try to fix build on linux and osx
* update versions
* exclude static
* guarantee the same result across platforms
* minor changes to boost-modular-build-helper's CMake
* correct versions
* [boost-modular-build-helper] install Python extensions on Windows
* [boost-mpi] add patch to fix build Python extension on Windows
* update versions
* [boost-mpi] remove python2 by request @BillyONeal @strega-nil-ms
* update version
* update versions
Co-authored-by: nicole mazzuca <mazzucan@outlook.com>
Co-authored-by: PhoebeHui <20694052+PhoebeHui@users.noreply.github.com>
* [fluidsynth] Update to 2.2.3
* Update patch
* EOL
* Change tool as a new feature
* version
* Remove code about CMAKE_EXECUTABLE_SUFFIX to fix linux build
* version
* update to 2.2.4, cleanup baseline, add supports keyword
* version
* Fix osx build
* version
* restore FEATURE_OPTIONS
* version
* Apply suggestions
* version
* Restore add_to_path in host triplet
* version
* Preserve log files for the build of make_tables.
Co-authored-by: NancyLi1013 <lirui09@beyondsoft.com>
Co-authored-by: JackBoosY <yuzaiyang@beyondsoft.com>
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* [vcpkg_fail_port_install] add a warning about extra args when ALWAYS is passed
* Address the review suggestions
Co-authored-by: PhoebeHui <20694052+PhoebeHui@users.noreply.github.com>
* [llvm] update to 13.0.0
* add version
* [llvm] rework processing of the CMake packages
* update versions
* [llvm] return patch to fix config paths
* update version
* [llvm] allow to build Flang on Windows
* add version
* [llvm] temporary enable Flang by default for test
* update version
* [llvm] fix Flang installation
* update version
* [llvm] try to fix Flang build
* update version
* [llvm] remove Flang from defaults and use Perl path
* [halide] update to 13.0.0
* update versions
* [mesa] update to v21.2.5 and fix build with LLVM 13
* [llvm] use version
* update versions
* [opencv4] fix build with Halide 13
* update version
* update ci.baseline
* [halide] update usage file
* [llvm] update supports
* update versions
* [vcpkg-ci-llvm] add test port
* [vcpkg-ci-llvm] rework test port
* [vcpkg-ci-llvm] test more features
* [halide] update to v13.0.1
* update version
* [mesa] recover port version
* update versions
* [opencv4] update version
* update version
* Update opencv4.json
* [halide] update to v13.0.2 and fix usage
* update version
* Update ports/halide/portfile.cmake
Co-authored-by: Phoebe <20694052+PhoebeHui@users.noreply.github.com>
* update version
* enable LLVM ABI breaking checks to avoid Halide build fail
Co-authored-by: Phoebe <20694052+PhoebeHui@users.noreply.github.com>
* [vcpkg_acquire_msys] Update bzip2 to 1.0.8-2
* [tensorflow-common] remove single quotes from vcpkg flags
They are escaped like '\'-mtune=native\'' which leads to a compiler error:
cc: error: unrecognized command line option '-mtune=native'
Set via: set(VCPKG_CXX_FLAGS "-mtune=native")
* fix meson linker detection .....
* bit of code cleanup in vcpkg_configure_meson
* forgot the version stuff
* put cmake back on path because meson is buggy as hell
* Revert "incorporate changes from microsoft:master"
* Revert "Revert "incorporate changes from microsoft:master""
* update tensorflow to 2.7 and bazel to latest 4.x
* Update version database.
Co-authored-by: jgehw <Joachim_Gehweiler@McAfee.com>
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* Revert "incorporate changes from microsoft:master"
* Revert "Revert "incorporate changes from microsoft:master""
* preliminary approach to solve pip issue
* fix python venv
* fix macOS build command again
* bump version
* x-add-version
* Fix spelling of prerequisites.
* Add python3-venv
* Update linux pool.
Co-authored-by: Joachim Gehweiler <joachim@Joachims-iMac.local>
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* [yasm] Fix feature tools
* version
* update baseline
* fix arm build, add host dependency
* version
* Fix desc
* update baseline
* Remove arm fix patch
* version
* Fix build, apply suggestions
* version
* Add line break
* version
* Set tools as a feature
* version
* Remove remaining ci.baseline.txt entry.
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* Modernize lodepng portfile
* Update to 8c6a9e30
* Install LICENSE as copyright
* Don't install examples
* Remove unused parameter
* Merge lodepng-c into lodepng
* Add usage
* Omit lodepng-util: not official API
* Update versions
* [gdal] Don't use lz4: not a dependency
* [libjxl] Fix link flags
* Revise install cleanup, handle .dylib
* Add extra flags for uwp
* Workaround uwp toolchain quirks
* More dependency control, jxl_extras for tools only
* Pass the version to the build
* Update versions
* Skip CI for libjxl:arm-uwp
* Install usage file
* Update versions
* Use version-date for lodepng, mark lodepng-c as deprecated, and update version database.
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* [libdisasm] Support uwp
* version
* Add dependency vcpkg-cmake
* version
* [breakpad] drop support with uwp
* version
* use _CRT_SECURE_NO_WARNINGS instead
* version
* Fixed android toolchain with newest NDK
ANDROID_NATIVE_API_LEVEL has been removed from NDK cmake toolchain so we now have to use ANDROID_PLATFORM
* Fix android toolchain: Maintain backward compatibility for older NDK
* Revise portfile and patch
* Install pc file for windows
* Update versions
* Remove readosm failure from CI baseline
* Revise dependencies based on #include, use pkgconfig
* Revise portfile
* Update to 5.0.1
* Update versions
* Fix release-only nmake build
* Update versions
* update meson to 0.60.1
* add port vcpkg-tool-meson for consistency deprecate usage of tool-meson
* [skip actions] make every port using meson depend on vcpkg-tool-meson
(except pkgconf for now.)
* fix subtle bugs in vcpkg_find_acquire_program
make the port install meson if the system does not provide it.
* make pkgconf depend on meson
* restore old vcpkg_find_acquire_program behavior for versioning
* Update ports/gstreamer/vcpkg.json
remove duplicated dependency
* remove invalid option in glib
* [skip actions] fix ci failures?
* remove invalid option in gstreamer
* try without cmake
* get more logs from meson configure.
* update glib to 2.70.1
* fix typo
* fix pc file of flac
* update meson to 0.60.2
* try the patch from the other pr.
* patch meson .....
* version stuff
* fix port version
* fix gstreamer version
* remove version
* format-manifest
* version stuff
* format manifest again
* revert version stuff
* remove outdated gtk options
* version stuff
* pango version stuff
* correct baseline lost in merge
* Fix fontconfig version db
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* [vcpkg-gn] Adding gn as a host only port
* Disable support for x86 and fix variable name usage.
* [vcpkg-gn] Version information.
* Updating documentation.
Co-authored-by: David McCloskey <davmcclo@gmail.com>
- The directory specified no longer matches the directory used for
fetching.
- This was overlooked by PR microsoft/vcpkg#19338.
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* [bux] Add new port
* Corrections according to Create Pull Request suggested questions
* SHA512
* Mark fails into .\scripts\ci.baseline.txt
* Mark fails into .\scripts\ci.baseline.txt
* No need of "port-version": 1 in vcpkg.json
* Update version database
* Update ports/bux/portfile.cmake
Co-authored-by: JonLiu1993 <63675417+JonLiu1993@users.noreply.github.com>
* Update ports/bux/portfile.cmake
Co-authored-by: JonLiu1993 <63675417+JonLiu1993@users.noreply.github.com>
* Update ports/bux/portfile.cmake
Co-authored-by: JonLiu1993 <63675417+JonLiu1993@users.noreply.github.com>
* Update ports/bux/vcpkg.json
Co-authored-by: JonLiu1993 <63675417+JonLiu1993@users.noreply.github.com>
* Update bux.json
* Update ports/bux/vcpkg.json
* update version
* Update scripts/ci.baseline.txt
Co-authored-by: JonLiu1993 <63675417+JonLiu1993@users.noreply.github.com>
* update bux support
* update version
* update version
* Rename bux to buck-yeh-bux
* Update version database
* [buck-yeh-bux] upgrade to v1.5.0
1. [New] `bux::C_ParaLog` is ready for a variety of parallel logging configurations, filtered or unfiltered.
2. [New] Necessary helper classes for implementation _s.t_ logger users no longer need to declare child source instances explicitly.
3. [New] Add methods to `ParaLog.h` & `SyncLog.h` to support testability.
4. [New] Add unit test cases to `ParaLog.h` & `SyncLog.h` (test_paralog & test_logger)
5. [New] Update what are found in `test/` to `test/archlinux/aur_poc/`
6. [Bug] `std::uniform_int_distribution<unsigned char>` no longer allowed.
7. [Change] `CUR_FUNC_` for Windows (MSVC)
8. [Change] `tbb` is no longer implicitly needed by C++ standard library.
9. [Change] `smoke_filtlog.cpp` verifies 2-level log filters ok.
* Missing comma in versions/b-/buck-yeh-bux.json
* buck-yeh-bux 1.6.0
* Corrections made according to NancyLi1013's requests in PR #20813
* Fix SHA key in versions/b-/buck-yeh-bux.json
* Update to buxk-yeh-bux v1.6.2
* [buck-yeh-bux-mariadb-client] The first release
* Add dependency to libmariadb
* Inccorect git-tree value in versions/b-/buck-yeh-bux-mariadb-client.json
* linux build is enabled
* [buck-yeh-bux] Upgrade to 1.6.3 to allow u64-linux
* linux build is disabled again for not recognizing C++20 header <concpts> yet
* Mark vcpkg.json to support Linux but ci.baseline.txt to fail the CI build
* Repair buck-buck-yeh-bux in version database.
Co-authored-by: JonLiu1993 <63675417+JonLiu1993@users.noreply.github.com>
Co-authored-by: Jonliu1993 <13720414433@163.com>
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* Add cmake test port for user projects
* Improve find_package test failure output
* Remove JPEG from find_package tests
* Report find_package tests to stdout
* Test more packages
* Revise package list
* Remove obsolete variable
* Move AZP markup out of loop
* Fix typo
* Isolate find_package tests
* Disable manifest mode
* Improve stdout
* Enable debug output for find_package
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* Enable CI for libspatialite:x64-windows-static-md
* Use pkgconfig for nmake
* Use pkgconfig for autotools; fix mingw
* Install pc file for windows
* Add feature interface, make GPLv2+ features optional
* spatialite-tools need libspatialite[rttopo]
* Update versions
* Update to 3.1.15
* Modernize portfile
* Keep plugins
* Always use vcpkg zlib instead vendored copy
* Use zlib and openssl modules in pc file
* Always install pc file, drop non-relocatable mariadb_config
* UWP is not supported
* Use schannel SSL backend on windows
* Fix exported includedir and libdir
* Fixup windows pc file
* Disable extra static lib
* Disable plugins with extra dependencies
* [libmariadb] Namespace targets with unofficial::
* Update versions
* Enable CI for x86-windows: no conflict with mysql
* Re-enable lib mariadbclient via feature
* Use openssl targets to handle multi-config
* Update versions
* CR request
* Update versions
* [scripts-audit] vcpkg_install_nmake
* [scripts-audit] vcpkg_build_nmake
hoping not to make too many changes, just minor simplifications
* is this the issue with gdal?
* back-compat hack woot
* remove port-specific workaround
* dg0yt CR
* [getdns/flint] Update to the latest version
* [getdns/flint] Update to the latest version
* [flint] Add unsupported on uwp
* Update version files
* [flint] Handle dllimport macro in header files
* [arb] Update to 2.21.0
* [arb] Update to 2.2.1 and use upstream CMakeLists.txt
* [arb] App patch
* Update versions/a-/arb.json
* [vcpkg_host_path_list] add SET subcommand
* update docs
* try to do something that Billy might like more?
* wheee
Co-authored-by: nicole mazzuca <mazzucan@outlook.com>
Co-authored-by: PhoebeHui <20694052+PhoebeHui@users.noreply.github.com>
* Always use a build triplet for mingw
* [vcpkg_configure_make] Always assume cross-compilation
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
Co-authored-by: NancyLi1013 <lirui09@beyondsoft.com>
* Rewrite to single invovation of 'vcpkg ci'
* Split caching args from common args
* Use parent hashes for pull request CI builds
* Completely switch to parent revision state and back
* hwloc try and error
* hwloc fix build.
* format manifest
* version stuff
* remove supports expression. Copy COPYING from src dir
* format manifest
* overwrite version
* update ci baseline
hpx uses _mm_pause which seems to be undefined on arm64
maybe hpx requires a supports field?
* switch to version in manifest
* version stuff
* add maintainer
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
* version stuff
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
* Fixup mingw lib names on windows
* Update versions
* Bump boost-modular-build-helper port-version.
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* [boost-gil] remove dependency boost-filesystem
This dependency is optional and only used to build and run tests and examples.
See https://github.com/boostorg/gil#requirements
However, there is also BOOST_GIL_IO_ADD_FS_PATH_SUPPORT which enables
boost::filesystem::path support for IO functions, but since users have to define
it manually, they must install the dependency manually, too.
* fix spacing
* fix generate-ports.ps1
Co-authored-by: nicole mazzuca <mazzucan@outlook.com>
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* apply patches to make qtmultimedia work with gestreamer on windows
* version stuff
* remove libnice from ci.baseline
* move gstreamer on osx as fail to baseline
* add supports field to qtmultimedia. Qt does not officially support x86 on windows
* version stuff
* remove duplicated patch
* version stuff
* add upstream patch to fix x86-windows
* [skip actions] version stuff
* [farmhash] support windows build
* [farmhash] update baseline JSON
* [farmhash] patch from PR diff
* [farmhash] patch from all PR changes
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* Reformat portfile
* Minimize makefiles patch
* Update to 1.0.6
* Fix uwp builds, remove skip from baseline
* Install pc file for windows
* Update versions
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* [BitSerializer] Update to version 0.9
* [bitserializer] Update port to new version 0.44
* [bitserializer] Update deprecated VCPKG Cmake functions
* [bitserializer] Remove default features list
Co-authored-by: Pavel_Kisliak <Pavel_Kisliak@epam.com>
* REGRESSION: chartdir:x64-linux. If expected, add chartdir:x64-linux=fail to .\scripts\ci.baseline.txt.
-- Note: chartdir only supports dynamic library linkage. Building dynamic library.
-- Downloading http://www.advsofteng.net/chartdir_cpp_linux_64.tar.gz -> chartdir_cpp_linux_64-7.0.0.tar.gz...
[DEBUG] Feature flag 'binarycaching' unset
[DEBUG] Feature flag 'manifests' = off
[DEBUG] Feature flag 'compilertracking' unset
[DEBUG] Feature flag 'registries' unset
[DEBUG] Feature flag 'versions' unset
[DEBUG] popen(curl --fail -L "https://vcpkgassetcache.blob.core.windows.net/assets/e7e71b64b3a756b6df174758c392ab4c9310b4d265e521dccbd009eeefd46e021a74572e7212de5564725df20ddf189e1599e88a116b426f1256f7d34b0131aa?sp=racwl&st=2021-06-29T20:09:46Z&se=2021-10-02T04:09:46Z&spr=https&sv=2020-08-04&sr=c&sig=g3shlIpD0R923OUzfIsrTwjX0vc6OzNXGEDO3URXmYc%3D" --create-dirs --output /mnt/vcpkg-ci/downloads/chartdir_cpp_linux_64-7.0.0.tar.gz.1003174.part 2>&1)
[DEBUG] cmd_execute_and_stream_data() returned 5632 after 31162 us
[DEBUG] popen(curl --fail -L http://www.advsofteng.net/chartdir_cpp_linux_64.tar.gz --create-dirs --output /mnt/vcpkg-ci/downloads/chartdir_cpp_linux_64-7.0.0.tar.gz.1003174.part 2>&1)
[DEBUG] cmd_execute_and_stream_data() returned 0 after 8512565 us
Error: Failed to download from mirror set:
https://vcpkgassetcache.blob.core.windows.net/assets/e7e71b64b3a756b6df174758c392ab4c9310b4d265e521dccbd009eeefd46e021a74572e7212de5564725df20ddf189e1599e88a116b426f1256f7d34b0131aa?*** SECRET ***: % Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
curl: (22) The requested URL returned error: 403 Server failed to authenticate the request. Make sure the value of Authorization header is formed correctly including the signature.
File does not have the expected hash:
url : [ http://www.advsofteng.net/chartdir_cpp_linux_64.tar.gz ]
File path : [ /mnt/vcpkg-ci/downloads/chartdir_cpp_linux_64-7.0.0.tar.gz.1003174.part ]
Expected hash : [ e7e71b64b3a756b6df174758c392ab4c9310b4d265e521dccbd009eeefd46e021a74572e7212de5564725df20ddf189e1599e88a116b426f1256f7d34b0131aa ]
Actual hash : [ ea2e05f28dd9647fed49feaf130d8034065067463965f144b3fae4eae482579b1ecf528dc86d1b3602887d5ca0c3b1569404489b0f4cb2300b798fed940cd467 ]
Updated SHAs and added quotes. These are the changes made by upstream:
```
diff --git a/new_sha/ChartDirector/cppdemo/surfacetexture/surfacetexture.cpp b/old_sha/ChartDirector/cppdemo/surfacetexture/surfacetexture.cpp
index 79f15be..302eb78 100644
--- a/new_sha/ChartDirector/cppdemo/surfacetexture/surfacetexture.cpp
+++ b/old_sha/ChartDirector/cppdemo/surfacetexture/surfacetexture.cpp
@@ -108,7 +108,9 @@ void createChart(int chartIndex, const char *filename)
const int dataZ_size = dataX_size * dataY_size;
double dataZ[dataZ_size];
for(int yIndex = 0; yIndex < dataY_size; ++yIndex) {
+ double y = dataY[yIndex];
for(int xIndex = 0; xIndex < dataX_size; ++xIndex) {
+ double x = dataX[xIndex];
dataZ[yIndex * dataX_size + xIndex] = dataX[xIndex] * dataY[yIndex];
}
}
@@ -176,7 +178,7 @@ void createChart(int chartIndex, const char *filename)
// Use a DrawArea to load the image
DrawArea* d = new DrawArea();
d->load("maptexture.png");
- d->resize(c->getPlotRegionWidth(), c->getPlotRegionDepth());
+ d->resize(240, 210);
// Set the DrawArea as a resource
c->setResource("texture", d);
diff --git a/new_sha/ChartDirector/lib/libchartdir.so.7.0.0 b/old_sha/ChartDirector/lib/libchartdir.so.7.0.0
index b1ea97f..bfb1d4b 100644
Binary files a/new_sha/ChartDirector/lib/libchartdir.so.7.0.0 and b/old_sha/ChartDirector/lib/libchartdir.so.7.0.0 differ
diff --git a/new_sha/ChartDirector/qtdemo/helloworld/qchartviewer.cpp b/old_sha/ChartDirector/qtdemo/helloworld/qchartviewer.cpp
index 5736d60..423120f 100644
--- a/new_sha/ChartDirector/qtdemo/helloworld/qchartviewer.cpp
+++ b/old_sha/ChartDirector/qtdemo/helloworld/qchartviewer.cpp
@@ -107,9 +107,9 @@ private:
QCursor *hZoomOutCursor;
QCursor *hNoZoomCursor;
- QCursor &getZoomCursor(QCursor **cache, double scale, int flags)
+ QCursor &getZoomCursor(QCursor *cache, double scale, int flags)
{
- if (0 == *cache)
+ if (0 == cache)
{
DrawArea d;
d.setSize(32, 32, Chart::Transparent);
@@ -127,9 +127,9 @@ private:
MemBlock m = d.outPNG();
QImage img = QImage::fromData((const uchar*)m.data, m.len);
img.setDevicePixelRatio(scale);
- *cache = new QCursor(QPixmap::fromImage(img), 15, 15);
+ cache = new QCursor(QPixmap::fromImage(img), 15, 15);
}
- return **cache;
+ return *cache;
}
public:
@@ -145,15 +145,15 @@ public:
}
QCursor &getZoomInCursor(double scale)
{
- return getZoomCursor(&hZoomInCursor, scale, 3);
+ return getZoomCursor(hZoomInCursor, scale, 3);
}
QCursor &getZoomOutCursor(double scale)
{
- return getZoomCursor(&hZoomOutCursor, scale, 1);
+ return getZoomCursor(hZoomOutCursor, scale, 1);
}
QCursor &getNoZoomCursor(double scale)
{
- return getZoomCursor(&hNoZoomCursor, scale, 0);
+ return getZoomCursor(hNoZoomCursor, scale, 0);
}
} cursorManager;
diff --git a/new_sha/ChartDirector/qtdemo/qtdemo/democharts.cpp b/old_sha/ChartDirector/qtdemo/qtdemo/democharts.cpp
index a3b7962..d706853 100644
--- a/new_sha/ChartDirector/qtdemo/qtdemo/democharts.cpp
+++ b/old_sha/ChartDirector/qtdemo/qtdemo/democharts.cpp
@@ -10954,7 +10954,9 @@ void surfacetexture(QChartViewer *viewer, int chartIndex)
const int dataZ_size = dataX_size * dataY_size;
double dataZ[dataZ_size];
for(int yIndex = 0; yIndex < dataY_size; ++yIndex) {
+ double y = dataY[yIndex];
for(int xIndex = 0; xIndex < dataX_size; ++xIndex) {
+ double x = dataX[xIndex];
dataZ[yIndex * dataX_size + xIndex] = dataX[xIndex] * dataY[yIndex];
}
}
@@ -11022,7 +11024,7 @@ void surfacetexture(QChartViewer *viewer, int chartIndex)
// Use a DrawArea to load the image
DrawArea* d = new DrawArea();
d->load("@/images/maptexture.png");
- d->resize(c->getPlotRegionWidth(), c->getPlotRegionDepth());
+ d->resize(240, 210);
// Set the DrawArea as a resource
c->setResource("texture", d);
@@ -12304,6 +12306,11 @@ void treemapcolors(QChartViewer *viewer, int /* chartIndex */)
void treemaplayout(QChartViewer *viewer, int chartIndex)
{
+ // Labels for the tree map
+ const char* energy_types[] = {"Coal", "Oil", "Gas", "Nuclear", "Hydro", "Solar", "Wind",
+ "Biomass", "Geothermal", "Wave"};
+ const int energy_types_size = (int)(sizeof(energy_types)/sizeof(*energy_types));
+
// Random data for the tree map
RanSeries* r = new RanSeries(3);
DoubleArray data = r->getSeries(20, 20, 400);
@@ -14163,10 +14170,7 @@ void circularbarmeter2(QChartViewer *viewer, int chartIndex)
m->setCap(0, Chart::Transparent);
// In this example, the circular bar has 20 segments
- int segmentCount = 20;
-
- // The angular step
- double angleStep = 360.0 / segmentCount;
+ int angleStep = 360 / 20;
// The gap between segments is 4.5 degrees
double angleGap = 4.5;
@@ -14205,39 +14209,28 @@ void circularbarmeter2(QChartViewer *viewer, int chartIndex)
stepColorScale_size));
}
- //
- // Now we draw the segments of the bar meter
- //
-
- // The segment that contains the value
- int currentSegment = (int)(angle / angleStep);
-
- // Segments after the current segment is colored with the blank color
- for(int i = currentSegment + 1; i < segmentCount; ++i) {
- m->addRingSector(radius, radius - 20, i * angleStep, (i + 1) * angleStep - angleGap,
- blankColor);
+ // Draw the blank part of the circular bar
+ if (angle < 360) {
+ // Iterate the segments in the blank part of the circular bar
+ for(int startAngle = (int)(angle / angleStep) * angleStep; startAngle < 360; startAngle +=
+ angleStep) {
+ // The first segment may be partially filled
+ double partialAngle = (startAngle >= angle ? 0 : (angle - startAngle) * (1 - angleGap /
+ angleStep));
+ m->addRingSector(radius, radius - 20, startAngle + partialAngle, startAngle + angleStep
+ - angleGap, blankColor);
}
-
- // Segments before the current segment is colored with the fill color
- for(int i = 0; i < currentSegment; ++i) {
- m->addRingSector(radius, radius - 20, i * angleStep, (i + 1) * angleStep - angleGap,
- fillColor);
}
- // Segment that contains the angle will be partially filled and partially blank. We need to
- // adjust the angle to compensated for the angle gap.
- double adjustedAngle = currentSegment * angleStep + (angle - currentSegment * angleStep) * (1 -
- angleGap / angleStep);
-
- // The blank part of the segment
- if ((currentSegment + 1) * angleStep > angle) {
- m->addRingSector(radius, radius - 20, adjustedAngle, (currentSegment + 1) * angleStep -
- angleGap, blankColor);
+ // Draw the fill part of the circular bar
+ if (angle > 0) {
+ // Iterate the segments in the fill part of the circular bar
+ for(int startAngle = 0; startAngle < angle; startAngle += angleStep) {
+ // The last segment may be partially filled
+ double angleSpan = (angleStep - angleGap) * (angle >= startAngle + angleStep ? 1 : (
+ angle - startAngle) / angleStep);
+ m->addRingSector(radius, radius - 20, startAngle, startAngle + angleSpan, fillColor);
}
-
- // The filled part of the segment.
- if (angle > currentSegment * angleStep) {
- m->addRingSector(radius, radius - 20, currentSegment * angleStep, adjustedAngle, fillColor);
}
// Add a label at the center to display the value
diff --git a/new_sha/ChartDirector/qtdemo/qtdemo/financedemo.cpp b/old_sha/ChartDirector/qtdemo/qtdemo/financedemo.cpp
index 7b8c1f5..b029776 100644
--- a/new_sha/ChartDirector/qtdemo/qtdemo/financedemo.cpp
+++ b/old_sha/ChartDirector/qtdemo/qtdemo/financedemo.cpp
@@ -315,13 +315,6 @@ void FinanceDemo::onLineEditChanged()
int new_avgPeriod2 = m_MovAvg2->text().toInt();
QString tickerKey = m_TickerSymbol->text();
- if (tickerKey.isEmpty())
- {
- // Default tickerKey
- tickerKey = "ASE";
- m_TickerSymbol->setText(tickerKey);
- }
-
QString compareKey = m_CompareWith->text();
bool needReloadData = (m_tickerKey != tickerKey) || (m_compareKey != compareKey);
@@ -367,16 +360,12 @@ void FinanceDemo::loadData(const QString& ticker, const QString& compare)
if (m_compareKey != compare)
{
m_compareKey = compare;
- if (m_compareKey.isEmpty())
- m_dailyPrice.compareData.clear();
- else
- {
+
// Simulator to generate realistic random OHLC values
FinanceSimulator db2(compare.toUtf8().data(), Chart::chartTime(2010, 1, 1),
Chart::chartTime(2020, 12, 31), 86400);
m_dailyPrice.compareData = arrayToVector(db2.getCloseData());
}
- }
// In this example, we will compute the weekly and monthly prices on demand. We just
// need to clear the old data here.
diff --git a/new_sha/ChartDirector/qtdemo/qtdemo/qchartviewer.cpp b/old_sha/ChartDirector/qtdemo/qtdemo/qchartviewer.cpp
index 5736d60..423120f 100644
--- a/new_sha/ChartDirector/qtdemo/qtdemo/qchartviewer.cpp
+++ b/old_sha/ChartDirector/qtdemo/qtdemo/qchartviewer.cpp
@@ -107,9 +107,9 @@ private:
QCursor *hZoomOutCursor;
QCursor *hNoZoomCursor;
- QCursor &getZoomCursor(QCursor **cache, double scale, int flags)
+ QCursor &getZoomCursor(QCursor *cache, double scale, int flags)
{
- if (0 == *cache)
+ if (0 == cache)
{
DrawArea d;
d.setSize(32, 32, Chart::Transparent);
@@ -127,9 +127,9 @@ private:
MemBlock m = d.outPNG();
QImage img = QImage::fromData((const uchar*)m.data, m.len);
img.setDevicePixelRatio(scale);
- *cache = new QCursor(QPixmap::fromImage(img), 15, 15);
+ cache = new QCursor(QPixmap::fromImage(img), 15, 15);
}
- return **cache;
+ return *cache;
}
public:
@@ -145,15 +145,15 @@ public:
}
QCursor &getZoomInCursor(double scale)
{
- return getZoomCursor(&hZoomInCursor, scale, 3);
+ return getZoomCursor(hZoomInCursor, scale, 3);
}
QCursor &getZoomOutCursor(double scale)
{
- return getZoomCursor(&hZoomOutCursor, scale, 1);
+ return getZoomCursor(hZoomOutCursor, scale, 1);
}
QCursor &getNoZoomCursor(double scale)
{
- return getZoomCursor(&hNoZoomCursor, scale, 0);
+ return getZoomCursor(hNoZoomCursor, scale, 0);
}
} cursorManager;
```
* REGRESSION: ccfits:arm64-windows. If expected, add ccfits:arm64-windows=fail to .\scripts\ci.baseline.txt.
REGRESSION: ccfits:x64-linux. If expected, add ccfits:x64-linux=fail to .\scripts\ci.baseline.txt.
REGRESSION: ccfits:x64-osx. If expected, add ccfits:x64-osx=fail to .\scripts\ci.baseline.txt.
REGRESSION: ccfits:x64-windows-static-md. If expected, add ccfits:x64-windows-static-md=fail to .\scripts\ci.baseline.txt.
REGRESSION: ccfits:x64-windows-static. If expected, add ccfits:x64-windows-static=fail to .\scripts\ci.baseline.txt.
REGRESSION: ccfits:x64-windows. If expected, add ccfits:x64-windows=fail to .\scripts\ci.baseline.txt.
REGRESSION: ccfits:x86-windows. If expected, add ccfits:x86-windows=fail to .\scripts\ci.baseline.txt.
>[DEBUG] popen(curl --fail -L https://heasarc.gsfc.nasa.gov/fitsio/ccfits/CCfits-2.5.tar.gz --create-dirs --output /Users/bion/vcpkg/downloads/CCfits-2.5.tar.gz.15183.part 2>&1)
>[DEBUG] cmd_execute_and_stream_data() returned 5632 after 415053 us
>Error: Failed to download from mirror set:
>https://heasarc.gsfc.nasa.gov/fitsio/ccfits/CCfits-2.5.tar.gz: % Total % Received % Xferd Average Speed Time Time Time Current
> Dload Upload Total Spent Left Speed
> 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
>curl: (22) The requested URL returned error: 404 Not Found
Fixed link and modernized portfile.
* REGRESSION: geogram:x64-linux. If expected, add geogram:x64-linux=fail to .\scripts\ci.baseline.txt.
REGRESSION: geogram:x64-osx. If expected, add geogram:x64-osx=fail to .\scripts\ci.baseline.txt.
REGRESSION: geogram:x64-windows-static-md. If expected, add geogram:x64-windows-static-md=fail to .\scripts\ci.baseline.txt.
REGRESSION: geogram:x64-windows-static. If expected, add geogram:x64-windows-static=fail to .\scripts\ci.baseline.txt.
REGRESSION: geogram:x64-windows. If expected, add geogram:x64-windows=fail to .\scripts\ci.baseline.txt.
REGRESSION: geogram:x86-windows. If expected, add geogram:x86-windows=fail to .\scripts\ci.baseline.txt.
Upstream is gone:
https://gforge.inria.fr/frs/download.php/file/38314/geogram_1.7.5.tar.gz: % Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
curl: (60) SSL: no alternative certificate subject name matches target host name 'gforge.inria.fr'
More details here: https://curl.haxx.se/docs/sslcerts.html
curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the web page mentioned above.
[DEBUG] /agent/_work/1/s/buildtrees/_vcpkg/src/vcpkg-tool-2021-09-10/src/vcpkg/base/downloads.cpp(626)
[DEBUG] Exiting after 583.7 ms us (582562 us)
CMake Error at scripts/cmake/vcpkg_download_distfile.cmake:83 (message):
Failed to download file with error: 1
If you use a proxy, please check your proxy setting. Possible causes are:
1. You are actually using an HTTP proxy, but setting HTTPS_PROXY variable
to `https://address:port`. This is not correct, because `https://` prefix
claims the proxy is an HTTPS proxy, while your proxy (v2ray, shadowsocksr
, etc..) is an HTTP proxy. Try setting `http://address:port` to both
HTTP_PROXY and HTTPS_PROXY instead.
2. You are using Fiddler. Currently a bug (https://github.com/microsoft/vcpkg/issues/17752)
will set HTTPS_PROXY to `https://fiddler_address:port` which lead to problem 1 above.
Workaround is open Windows 10 Settings App, and search for Proxy Configuration page,
Change `http=address:port;https=address:port` to `address`, and fill the port number.
3. You proxy's remote server is out of service.
In future vcpkg releases, if you are using Windows, you no longer need to set
HTTP(S)_PROXY environment variables. Vcpkg will simply apply Windows IE Proxy
Settings set by your proxy software. See (https://github.com/microsoft/vcpkg-tool/pull/49)
and (https://github.com/microsoft/vcpkg-tool/pull/77)
Otherwise, please submit an issue at https://github.com/Microsoft/vcpkg/issues
Call Stack (most recent call first):
scripts/cmake/vcpkg_download_distfile.cmake:274 (z_vcpkg_download_distfile_show_proxy_and_fail)
ports/geogram/portfile.cmake:4 (vcpkg_download_distfile)
scripts/ports.cmake:141 (include)
Skipped in ci.baseline.txt.
* update to 14.2.3
* remove trailing whitespace
* update HEAD_REF
* update deprecated functions
* quote paths
* update versioning
* update baseline
* update versioning
* Use version rather than version-string.
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* [vcpkg_copy_tools] support copying .app bundles
* check for VCPKG_TARGET_IS_OSX
* Fix formatting
* [vcpkg_copy_tools] copy bundle and plain bin if both present
* Update scripts/cmake/vcpkg_copy_tools.cmake
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
Co-authored-by: nicole mazzuca <83086508+strega-nil-ms@users.noreply.github.com>
PASSING, REMOVE FROM FAIL LIST: libsamplerate:x64-osx (.\scripts\ci.baseline.txt)
PASSING, REMOVE FROM FAIL LIST: cppgraphqlgen:x64-osx (.\scripts\ci.baseline.txt)
PASSING, REMOVE FROM FAIL LIST: libopusenc:x64-osx (.\scripts\ci.baseline.txt)
PASSING, REMOVE FROM FAIL LIST: cartographer:x64-osx (.\scripts\ci.baseline.txt)
PASSING, REMOVE FROM FAIL LIST: clockutils:x64-osx (.\scripts\ci.baseline.txt)
PASSING, REMOVE FROM FAIL LIST: cairo:x64-osx (.\scripts\ci.baseline.txt)
PASSING, REMOVE FROM FAIL LIST: matio:x64-osx (.\scripts\ci.baseline.txt)
PASSING, REMOVE FROM FAIL LIST: coolprop:x64-osx (.\scripts\ci.baseline.txt)
These were all hidden because before the Tensorflow fix we haven't had a working MacOS CI in weeks.
REGRESSION: mfl:x64-osx. If expected, add mfl:x64-osx=fail to .\scripts\ci.baseline.txt.
This depended on cario.
REGRESSION: cppkafka:x64-osx. If expected, add cppkafka:x64-osx=fail to .\scripts\ci.baseline.txt.
This looks like a legitimate failure to detect the dependent library librdkafka
REGRESSION: forge:x64-osx. If expected, add forge:x64-osx=fail to .\scripts\ci.baseline.txt.
This looks like a legitimate failure to
REGRESSION: embree3:x64-osx. If expected, add embree3:x64-osx=fail to .\scripts\ci.baseline.txt.
Conflicts on MacOS probably for the same reason as Linux.
* [qt6] Update to 6.1.1
* version stuff
* fix empty dir
* update version
* fix casing in qtbase
* [libpq] add secure32.lib on windows
* add clang-cl fix
* version stuff
* fix flag removal by adding a space
* version stuff
* make qt6->Qt6 usage consistent since Qt6 refers to itself as Qt6 with uppercase Q
* fix libpq wrapper opensll linkage on linux
* use policy to fix dependent ports
* version stuff
* use upstream patch
* version stuff
* fix source_location with clang-cl
* version stuff
* add all new modules
* add all modules to the qt port
* push all the ports
* fix patch
* update ports
* split qt_install_submodule into smaller functions
* add qlitehtml submodule to qttools
* update a few ports before moving to beta
* update vcpkg.json and refs and fix issue with update
* fix dependencies
* remove patch
* update to 6.2
* add nodejs to vcpkg_find_acquire_program for qtwebengine
* format manifest.
* fix webengine and see if it builds.
* apply format diff
* add patch
* fix arm builds
* fix linux gcc 7.5 build error
* fix patch
* bump version in qtbase otherwise CI seems to resuse the wrong version
* fix webengine release build
* try fixing gcc 7.5 build
* revert gcc 7.5 fixes since they broke osx
* revert gcc 7.5 fixes since they broke osx
* fix qtimageformats.
* actually enable new qt6 builds.
* fix search path for nodejs.
* fix the webengine patch again.
* fix wrong binary name
* revisit all dependencies
* revisit webengine features and build settings
* more feature stuff
* remove qt6betablock and more features review for qt 6.2
* add missing qt prefix.
* format manifest
* fix ci issues
* format manifest.
* add node on osx.
* install node on linux
* fix a typo and a disable another find_package
* fix mingw build issues and switch to not using tag
* use CMAKE_HOST_WIN32 instead
* update ref
* fix core configure error
* fix mingw case.
* fix script installation
* remove qmake helper scrpt
* delete debug folder if empty
* add vcpkg-tool-nodejs
* revert changes in the pipeline scripts
* adjust qtwebengine to the changes
* format manifest and revert doc changes
* fix message and logic
* fix hashes and make host only port
* fix hash again?
* qttools add linguist feature for crossbuilds
* fix dependency
* add thread and future to concurrent feature
* add assistant as a required host feature
(somebody should tell Qt not to do that)
* fix dependency.
* [skip ci] not a host dep?!?
* [skip ci] debuging
* [skip ci] more debug messages
* [skip ci] try always redownloading
* [skip ci] fix hash und skip hash for redownloading once
* [skip ci] comment out skip sha and redownload
* add vcpkg_fixup_pkgconfig to libvpx
* qtwebengine requires qml and quick
* fix manifest format
* qtwebengine does not support static builds!
* remove unnecessary parts of the patch
* update to beta2
* add some " and a message in update mode
* [skip ci] remove old and reorder patches
* [skip ci] add qtpaths6
* [skip actions] fix webengine patch
* [skip actions] fix a few submodule refs
* [skip actions] fix qtwebengine
* [skip actions] remove qml feature from webengine in qt metaport
* qtdeclarative raise minimum cmake version
* use the tree id instead?
* [skip actions] raise minimum cmake version in qtquick3d
* fix fetching of unadvertised commit ids
* revert changes to vcpkg_from_git
* revert doc changes
* [skip actions] use the new FETCH_REF
* [skip actiosn] remove raise of minimum version to retry with new cmake version
* [skip actions] update to beta3
* revert removal of patch
* update to beta4
remove qtquickcontrols2 deps
* fix missing \
* [skip actions] fix gstreamer feature on windows
* [skip actions]
remove outdated patches
format qtmultimedia
* [skip actions] update to rc1
* [skip actions] remove patch for now
* update refs
* [skip actions] comment patch to try another patch in qtmultimedia
* x86 is not supported by qtwebengine (at least one of its internal third party deps fails due to x64 intrinsics.)
* Finalize for 6.2 release.
Open issues: QtWebengine and cross builds.
* version stuff
* fix semver in qtquickcontrols.
* version stuff
* revise qtwebengine supports expression
* update version
https://dev.azure.com/vcpkg/public/_build/results?buildId=60445
PASSING, REMOVE FROM FAIL LIST: soundtouch:x64-windows-static
Probably fixed by: https://github.com/microsoft/vcpkg/pull/19377
REGRESSION: mosquitto:x86-windows
REGRESSION: mosquitto:x64-windows
Probably broken by: https://github.com/microsoft/vcpkg/pull/20148/
```
The following EXEs were found in /bin or /debug/bin. EXEs are not valid distribution targets.
D:/packages/mosquitto_x86-windows/bin/mosquitto_ctrl.exe
The following EXEs were found in /bin or /debug/bin. EXEs are not valid distribution targets.
D:/packages/mosquitto_x86-windows/debug/bin/mosquitto_ctrl.exe
Found 2 error(s). Please correct the portfile:
C:\a\1\s\ports\mosquitto\portfile.cmake
-- Performing post-build validation done
```
The upstream build system has this:
```
option(WITH_CJSON "Build with cJSON support (required for dynamic security plugin and useful for mosquitto_sub)?" ON)
if (WITH_CJSON)
FIND_PACKAGE(cJSON)
if (CJSON_FOUND)
message(STATUS ${CJSON_FOUND})
else (CJSON_FOUND)
message(STATUS "Optional dependency cJSON not found. Some features will be disabled.")
endif(CJSON_FOUND)
endif()
```
and indeed, I repro the problem if cjson is installed first. Disable WITH_CJSON as a fix.
OSX never finishing: Hopefully fixed by https://github.com/microsoft/vcpkg/pull/20388
* [macos ci] move out tensorflow
* rename ExtraPorts and CorePorts
Co-authored-by: nicole mazzuca <mazzucan@outlook.com>
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* [ci] Move formatting and doc checks into x86-windows to avoid burning a whole job for that 1 run, don't run file lists generation in PRs.
* Deduplicate x86-windows and restore PR file lists, as requested/suggested by @dg0yt
* More quotes
Co-authored-by: nicole mazzuca <83086508+strega-nil-ms@users.noreply.github.com>
Co-authored-by: nicole mazzuca <83086508+strega-nil-ms@users.noreply.github.com>
* [scripts-audit] vcpkg_fixup_pkgconfig
* Neumann-A CR, fix docs
* vcpkg_fixup_pkgconfig bugs
* fix group
* moar fixing
* be more clever around pkg_config_path
* add `vcpkg_host_path_list` so that we can unit test
* move stuff around a bit
* fix bug in vcpkg_host_path_list.cmake
* ras0219 CRs
Some Linux distributions (e.g. the OpenSUSE family) defaults to lib64
instead of lib, which breaks vcpkg's assumtion that libraries are in
lib.
Use the --libdir option of autotools to force the directory to be lib
* [vcpkg/script/meson] add option NO_PKG_CONFIG to skip pkg-config setup
* [vcpkg/script/pkgconfig] move vcpkg_find_acquire_program(PKGCONFIG) into the check section where it is used
* [pkgconf] Update to 1.8.0
* version stuff
* remove unused patch.
* (CR) quote string
* version update.
When VcpkgInstallManifestDependencies runs in parallel,
the Delete in one task causes the touch in another to fail.
The Delete isn't actually necessary to accomplish the goal
here, so remove it.
Looked at most recent build https://dev.azure.com/vcpkg/public/_build/results?buildId=59859
REGRESSION: dxsdk-d3dx:x86-windows
REGRESSION: dxsdk-d3dx:x64-windows
```
The following files are already installed in D:/installed/x86-windows and are in conflict with dxsdk-d3dx:x86-windows
Installed by directxsdk:x86-windows
debug/lib/d3dx10d.lib
debug/lib/d3dx11d.lib
debug/lib/d3dx9d.lib
lib/d3dx10.lib
lib/d3dx11.lib
lib/d3dx9.lib
```
Probably caused by https://github.com/microsoft/vcpkg/pull/20053/ which removed windows & !windows from the directxsdk supports field.
PASSING, REMOVE FROM FAIL LIST: cmark:x64-windows-static
Already filed https://github.com/microsoft/vcpkg/pull/20216 last week about this.
ARM: vcpkg crashed. Reported to team chat.
OSX: agent died: ##[error]We stopped hearing from agent vcpkg-eg-mac-02.
Looks to be the same outstanding tensorflow problem :(
REGRESSION: embree3:x64-linux
```
Starting package 640/1653: embree3:x64-linux
Building package embree3[avx,avx2,core,sse2,sse42]:x64-linux...
-- Downloading https://github.com/embree/embree/archive/v3.12.2.tar.gz -> embree-embree-v3.12.2.tar.gz...
-- Extracting source /mnt/vcpkg-ci/downloads/embree-embree-v3.12.2.tar.gz
-- Applying patch fix-path.patch
-- Applying patch fix-static-usage.patch
-- Applying patch cmake_policy.patch
-- Applying patch fix-targets-file-not-found.patch
-- Using source at /mnt/vcpkg-ci/buildtrees/embree3/src/v3.12.2-cbae4ce8b1.clean
-- Configuring x64-linux-dbg
-- Configuring x64-linux-rel
CMake Warning at scripts/cmake/vcpkg_configure_cmake.cmake:433 (message):
The following variables are not used in CMakeLists.txt:
EMBREE_STATIC_RUNTIME
Please recheck them and remove the unnecessary options from the
`vcpkg_configure_cmake` call.
If these options should still be passed for whatever reason, please use the
`MAYBE_UNUSED_VARIABLES` argument.
Call Stack (most recent call first):
ports/embree3/portfile.cmake:50 (vcpkg_configure_cmake)
scripts/ports.cmake:140 (include)
-- Building x64-linux-dbg
-- Building x64-linux-rel
-- Installing: /mnt/vcpkg-ci/packages/embree3_x64-linux/share/embree3/copyright
-- Performing post-build validation
```
Probably caused by https://github.com/microsoft/vcpkg/pull/20053 which removed supports:windows from embree2.
Most recent CI build: https://dev.azure.com/vcpkg/public/_build/results?buildId=59428
REGRESSION: poppler:arm64-windows. If expected, add poppler:arm64-windows=fail to .\scripts\ci.baseline.txt.
PASSING, REMOVE FROM FAIL LIST: fontconfig:arm64-windows (.\scripts\ci.baseline.txt)
poppler depends on fontconfig, so this isn't actually a regression.
PASSING, REMOVE FROM FAIL LIST: libfreenect2:x64-linux
* [bsa] new port
* [bsa] Update version file
* [bsa] Update ci baseline
* [bsa] Update version database
* [bsa] Add patch for minimum cmake version
* [bsa] Update ci baseline
* Update version database
* Try more CI
* Fix merge typo
* [bsa] Update library version
* Update versions database
* Apply suggestions from code review
Co-authored-by: JonLiu1993 <63675417+JonLiu1993@users.noreply.github.com>
* Update versions/b-/bsa.json
Co-authored-by: JonLiu1993 <63675417+JonLiu1993@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
* Update versions database
* [bsa] Add warning instead of fail on Linux
* Update versions database
* Update ports/bsa/vcpkg.json
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* Update version database
* Rename to rsm-bsa
* Update versions database
* Update versions/baseline.json
Co-authored-by: JonLiu1993 <63675417+JonLiu1993@users.noreply.github.com>
* Fix typo
* Update versions
* Update ci.baseline.txt
* Remove rsm-bsa:x64-linux=fail in ci.baseline.txt now that VMs have G++10.
* Revert "Remove rsm-bsa:x64-linux=fail in ci.baseline.txt now that VMs have G++10."
because we actually are on gcc 9.x :(
This reverts commit 781289dc26d5c018a2486581fb89fc00d60198ee.
Co-authored-by: JonLiu1993 <63675417+JonLiu1993@users.noreply.github.com>
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* [vcpkg] Support VS2022 17.0
* small changes
* Update vcpkg.cmake
* Update the baseline version
* Update the baseline version
* Update the baselin version
* Adress the review suggestions
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* [meson] fix cross compiling from linux to windows
* Fix mingw system name
* Omit empty fields from standard libraries
* Use VCPKG_CROSSCOMPILING
* vcpkg_configure_meson: do not double escape include paths
* vcpkg_configure_meson: set winres instead of rc
* vcpkg_configure_meson: do not always cross build
* Apply suggestions from code review
* fix the issue I made
* [meson] error when gcc uses a different linker executeable
* [meson] apply code review from strega-nil
* [meson] more verbose error messages
* [meson] remove wrong check
Co-authored-by: Kai Pastor <dg0yt@darc.de>
Co-authored-by: nicole mazzuca <83086508+strega-nil-ms@users.noreply.github.com>
Co-authored-by: nicole mazzuca <mazzucan@outlook.com>
* [h3/jaeger-client-cpp] Update to the latest version
* Remove CONTROL files
* Update version files
* Update patch
* Update versions/j-/jaeger-client-cpp.json
* [libhsplasma/libpcap/lv2] Update to the latest version
* [libpcap] Remove unused comments
* Update version files
* [lv2] Fix usage
[libpcap] Update ci.baseline.txt
* [libhsplasma] Remove x64-windows-static=fail from ci.baseline.txt
* [libcrafter] Update to 1.0
* [libcrafter] Add vcpkg.json
* Update version files
* Add CRT check for libpcap and update version as versin-semver for libpcap
* Update version files
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* Remove prior arm/uwp patch since host dependencies now allow for proj database generation, and add a new patch that repairs Win32 API calls to use UWP counterparts in UWP builds
* Update ci baseline for port changes
* Update port version
* Fix patch list for PR
* Bump port-version, disable some broken downstream libs
* Update port version commit
* Decouple the storage account used for binary caching from the images.
We are being forced to change infrastructure somewhat more frequently than we would like, so change the binary caches to use a shared storage account like we already use for asset caching.
* blob blob blob
* Add quotes
* Avoid name stomping.
* Repair msbuild damage and workaround the way we integrate on VS2015.
This is a fix for a pile of issues discovered by https://github.com/microsoft/vcpkg/pull/18906
* VS 2015 has a bug that the <VcpkgInstalledDir Condition="!$(VcpkgInstalledDir.EndsWith('\'))">$(VcpkgInstalledDir)\</VcpkgInstalledDir> dance we do to get a trailing slash is not applied correctly when VcpkgInstalledDir was edited in the same property group attempting to add the trailing slash.
* We need a trailing slash on VcpkgInstalledDir at all times, but https://github.com/microsoft/vcpkg/pull/16173 damaged this by removing it from TreatAsLocalProperty. Add the right TreatAsLocalPropertys back. Add all such slash defenses to the top of the file just beneath, eliminating need to call Path::Combine and friends by following msbuild "directory properties have a trailing slash" convention.
* Move VcpkgOSTarget and VcpkgPlatformTarget into the .targets, as they aren't intended to be overridable by users and don't appear in our selection dialog box(es).
* Don't bother avoiding setting vcpkg properties when VcpkgEnabled is off; after all, VcpkgEnabled is itself a vcpkg property :). I left attempts to skip creating items since creating items can hit the disk.
* Add _Z to several internal msbuild variables.
* Move VcpkgApplocalDeps to the .props since it's a user setting.
* Don't unconditionally use $(TLogLocation) because it is not set on 2015, and also it's per-project.
* Fixed typo in docs "VcpkgInstalledDirectory", and document the limitation that it doesn't work in 2015.
* In manifest mode, put the installed tree in a subdirectory including the triplet to make changing configurations faster.
Known limitations:
* If you change vcpkg.json without changing any .cpp files, we don't rebuild the dependencies even though we should. I don't know how to fix this but it doesn't appear to be a regression.
* Fix .tlog handling.
* Further defend against modified properties on VS2015.
* Document more VS2015 limitations.
* Remove TreatAsLocalProperty comment.
* Revert "incorporate changes from microsoft:master"
* Revert "Revert "incorporate changes from microsoft:master""
* issue targeted in newer numpy version
* work-around for broken numpy libs on macOS
* temporarily add debug code to analyze CI failures
* again temporary debug code
* fix linkage command on macOS (broken by Bazel upgrade)
* fix regex for macOS linker command
* remove debug code, bump version
* x-add-version seems to require a separate commit...
* Fix misspelled "acceleration".
* x-add-version
Co-authored-by: jgehw <Joachim_Gehweiler@McAfee.com>
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
* Fix filenames for linux vs windows in liblo portfile
* Removed deprecated call and now using vcpkg_copy_tools
* Upgraded to manifest file
* Increment port-version
* Remove now working builds from ci.baseline
* Updated versioning files
* Fixed type for vcpkg.json
* Updated sha for liblo version
* [vcpkg_cmake_config_fixup] Revert #19469
* Update the version date
* actually just revert
* move stuff around in vcpkg-cmake-config.json file
Co-authored-by: nicole mazzuca <mazzucan@outlook.com>
* remove "find_path(STDINT_H stdint.h)". On clang/macos, this picks up the kernel headers version of stdint.h, instead of the C standard library, breaking compilation
* only define YY_NO_UNISTD_H and YY_USE_CONST on Windows, like the upstream CMakeLists.txt
* set the C standard to C99, like the upstream CMakeLists.txt
* update to 1.7.3
* remove the "fail" line from ci.baseline.txt
* run ./vcpkg x-add-version --all to update metadata files
* reset port-version
CMAKE_HOST_SYSTEM_PROCESSOR is set to amd64 on x86-64 FreeBSD systems.
CMake's STREQUAL gives a case-sensitive comparison so this case was
missed during bootstrapping when using vcpkg as a submodule.
* [keystone] Fix static build with dynamic CRT on Windows
* Add port-version
* Update version files
* Add double quotes for the path
* Update versions/k-/keystone.json
* Add comments for kstool
* Update versions/k-/keystone.json
* [vcpkg baseline][rbdl-orb/rbdl] file conflicts, skip rbdl-orb in Ci testing
* [ptex] Add DISABLE_PARALLEL_CONFIGURE
* Update the baseline version
* Add missing quotes
* Update the baseline version
