Alexander Alashkin eaef5bd133 Revert "Stop publish examples to mongoose repo"
This reverts commit 1a17e17c462bdd4e1d26d8742f8b7087273e04c2.

PUBLISHED_FROM=80028de308c9a021955d1425d2bfee8feb85f193
2017-02-06 14:08:59 +00:00

158 lines
4.3 KiB
C

/*
* Copyright (c) 2014-2016 Cesanta Software Limited
* All rights reserved
*/
#include "mongoose.h"
#include <stdio.h>
#include <stdlib.h>
#include "lwip/dhcp.h"
#include "lwip/init.h"
#include "lwip/netif.h"
#include "lwip/timers.h"
#include "netif/etharp.h"
#include "ethernetif.h"
#include "board.h"
#include "fsl_gpio.h"
#include "fsl_port.h"
#include "pin_mux.h"
/* IP address configuration. */
#define USE_DHCP 1 /* For static IP, set to 0 and configure options below */
#if !USE_DHCP
#define STATIC_IP "192.168.0.111"
#define STATIC_NM "255.255.255.0"
#define STATIC_GW "192.168.0.1"
#endif
void gpio_init() {
CLOCK_EnableClock(kCLOCK_PortA);
CLOCK_EnableClock(kCLOCK_PortB);
CLOCK_EnableClock(kCLOCK_PortE);
PORT_SetPinMux(BOARD_LED_RED_GPIO_PORT, BOARD_LED_RED_GPIO_PIN,
kPORT_MuxAsGpio);
LED_RED_INIT(0);
PORT_SetPinMux(BOARD_LED_GREEN_GPIO_PORT, BOARD_LED_GREEN_GPIO_PIN,
kPORT_MuxAsGpio);
LED_GREEN_INIT(0);
PORT_SetPinMux(BOARD_LED_BLUE_GPIO_PORT, BOARD_LED_BLUE_GPIO_PIN,
kPORT_MuxAsGpio);
LED_BLUE_INIT(0);
LED_BLUE_OFF();
}
void ev_handler(struct mg_connection *nc, int ev, void *ev_data) {
if (ev == MG_EV_POLL) return;
/* printf("ev %d\r\n", ev); */
switch (ev) {
case MG_EV_ACCEPT: {
char addr[32];
mg_sock_addr_to_str(&nc->sa, addr, sizeof(addr),
MG_SOCK_STRINGIFY_IP | MG_SOCK_STRINGIFY_PORT);
printf("%p: Connection from %s\r\n", nc, addr);
break;
}
case MG_EV_HTTP_REQUEST: {
struct http_message *hm = (struct http_message *) ev_data;
char addr[32];
mg_sock_addr_to_str(&nc->sa, addr, sizeof(addr),
MG_SOCK_STRINGIFY_IP | MG_SOCK_STRINGIFY_PORT);
printf("%p: %.*s %.*s\r\n", nc, (int) hm->method.len, hm->method.p,
(int) hm->uri.len, hm->uri.p);
mg_send_response_line(nc, 200,
"Content-Type: text/html\r\n"
"Connection: close");
mg_printf(nc,
"\r\n<h1>Hello, %s!</h1>\r\n"
"You asked for %.*s\r\n",
addr, (int) hm->uri.len, hm->uri.p);
nc->flags |= MG_F_SEND_AND_CLOSE;
LED_BLUE_TOGGLE();
break;
}
case MG_EV_CLOSE: {
printf("%p: Connection closed\r\n", nc);
break;
}
}
}
/*
* This is a callback invoked by Mongoose to signal that a poll is needed soon.
* Since we're in a tight polling loop anyway (see below), we don't need to do
* anything.
*/
void mg_lwip_mgr_schedule_poll(struct mg_mgr *mgr) {
}
int main(void) {
struct netif eth0;
MPU_Type *base = MPU;
BOARD_InitPins();
BOARD_BootClockRUN();
BOARD_InitDebugConsole();
/* Disable MPU. */
base->CESR &= ~MPU_CESR_VLD_MASK;
lwip_init();
gpio_init();
LED_RED_ON();
printf("Waiting for link...\r\n");
#if USE_DHCP
netif_add(&eth0, NULL, NULL, NULL, NULL, ethernetif_init, ethernet_input);
printf("Waiting for DHCP...\r\n");
LED_GREEN_ON();
dhcp_start(&eth0);
u8_t os = 0xff, ds;
do {
ds = eth0.dhcp->state;
if (ds != os) {
printf(" DHCP state: %d\r\n", ds);
os = ds;
}
sys_check_timeouts();
} while (ds != DHCP_BOUND);
printf("DHCP bound.\r\n");
#else
ip_addr_t ip, nm, gw;
if (!ipaddr_aton(STATIC_IP, &ip) || !ipaddr_aton(STATIC_NM, &nm) ||
!ipaddr_aton(STATIC_GW, &gw)) {
printf("Invalid static IP configuration.\r\n");
return 1;
} else {
netif_add(&eth0, &ip, &nm, &gw, NULL, ethernetif_init, ethernet_input);
netif_set_up(&eth0);
}
#endif
netif_set_default(&eth0);
printf("Setting up HTTP server...\r\n");
struct mg_mgr mgr;
mg_mgr_init(&mgr, NULL);
const char *err;
struct mg_bind_opts opts = {};
opts.error_string = &err;
struct mg_connection *nc = mg_bind_opt(&mgr, "80", ev_handler, opts);
if (nc == NULL) {
printf("Failed to create listener: %s\r\n", err);
LED_RED_ON();
LED_GREEN_OFF();
return 1;
}
mg_set_protocol_http_websocket(nc);
printf("Server address: http://%s/\r\n", ipaddr_ntoa(&eth0.ip_addr));
LED_RED_OFF();
LED_GREEN_ON();
while (1) {
sys_check_timeouts();
mg_mgr_poll(&mgr, 0);
}
return 0;
}