mirror of
https://github.com/cesanta/mongoose.git
synced 2024-12-29 16:25:54 +08:00
150 lines
6.2 KiB
C
150 lines
6.2 KiB
C
// Copyright (c) 2022 Cesanta Software Limited
|
|
// All rights reserved
|
|
|
|
#include "mip.h"
|
|
|
|
#if MG_ENABLE_MIP && defined(__arm__)
|
|
|
|
struct stm32_eth {
|
|
uint32_t MACCR, MACFFR, MACHTHR, MACHTLR, MACMIIAR, MACMIIDR, MACFCR,
|
|
MACVLANTR, RESERVED0[2], MACRWUFFR, MACPMTCSR, RESERVED1, MACDBGR, MACSR,
|
|
MACIMR, MACA0HR, MACA0LR, MACA1HR, MACA1LR, MACA2HR, MACA2LR, MACA3HR,
|
|
MACA3LR, RESERVED2[40], MMCCR, MMCRIR, MMCTIR, MMCRIMR, MMCTIMR,
|
|
RESERVED3[14], MMCTGFSCCR, MMCTGFMSCCR, RESERVED4[5], MMCTGFCR,
|
|
RESERVED5[10], MMCRFCECR, MMCRFAECR, RESERVED6[10], MMCRGUFCR,
|
|
RESERVED7[334], PTPTSCR, PTPSSIR, PTPTSHR, PTPTSLR, PTPTSHUR, PTPTSLUR,
|
|
PTPTSAR, PTPTTHR, PTPTTLR, RESERVED8, PTPTSSR, PTPPPSCR, RESERVED9[564],
|
|
DMABMR, DMATPDR, DMARPDR, DMARDLAR, DMATDLAR, DMASR, DMAOMR, DMAIER,
|
|
DMAMFBOCR, DMARSWTR, RESERVED10[8], DMACHTDR, DMACHRDR, DMACHTBAR,
|
|
DMACHRBAR;
|
|
};
|
|
#define ETH ((struct stm32_eth *) (uintptr_t) 0x40028000)
|
|
|
|
#define BIT(x) ((uint32_t) 1 << (x))
|
|
#define ETH_PKT_SIZE 1540 // Max frame size
|
|
#define ETH_DESC_CNT 4 // Descriptors count
|
|
#define ETH_DS 4 // Descriptor size (words)
|
|
|
|
static uint32_t s_rxdesc[ETH_DESC_CNT][ETH_DS]; // RX descriptors
|
|
static uint32_t s_txdesc[ETH_DESC_CNT][ETH_DS]; // TX descriptors
|
|
static uint8_t s_rxbuf[ETH_DESC_CNT][ETH_PKT_SIZE]; // RX ethernet buffers
|
|
static uint8_t s_txbuf[ETH_DESC_CNT][ETH_PKT_SIZE]; // TX ethernet buffers
|
|
static void (*s_rx)(void *, size_t, void *); // Recv callback
|
|
static void *s_rxdata; // Recv callback data
|
|
static void *s_userdata; // Driver data
|
|
enum { PHY_ADDR = 0, PHY_BCR = 0, PHY_BSR = 1 }; // PHY constants
|
|
|
|
static inline void spin(volatile uint32_t count) {
|
|
while (count--) asm("nop");
|
|
}
|
|
|
|
static uint32_t eth_read_phy(uint8_t addr, uint8_t reg) {
|
|
ETH->MACMIIAR &= (7 << 2);
|
|
ETH->MACMIIAR |= ((uint32_t) addr << 11) | ((uint32_t) reg << 6);
|
|
ETH->MACMIIAR |= BIT(0);
|
|
while (ETH->MACMIIAR & BIT(0)) spin(1);
|
|
return ETH->MACMIIDR;
|
|
}
|
|
|
|
static void eth_write_phy(uint8_t addr, uint8_t reg, uint32_t val) {
|
|
ETH->MACMIIDR = val;
|
|
ETH->MACMIIAR &= (7 << 2);
|
|
ETH->MACMIIAR |= ((uint32_t) addr << 11) | ((uint32_t) reg << 6) | BIT(1);
|
|
ETH->MACMIIAR |= BIT(0);
|
|
while (ETH->MACMIIAR & BIT(0)) spin(1);
|
|
}
|
|
|
|
static void mip_driver_stm32_init(void *userdata) {
|
|
s_userdata = userdata;
|
|
|
|
// Init RX descriptors
|
|
for (int i = 0; i < ETH_DESC_CNT; i++) {
|
|
s_rxdesc[i][0] = BIT(31); // Own
|
|
s_rxdesc[i][1] = sizeof(s_rxbuf[i]) | BIT(14); // 2nd address chained
|
|
s_rxdesc[i][2] = (uint32_t) (uintptr_t) s_rxbuf[i]; // Point to data buffer
|
|
s_rxdesc[i][3] =
|
|
(uint32_t) (uintptr_t) s_rxdesc[(i + 1) % ETH_DESC_CNT]; // Chain
|
|
}
|
|
|
|
// Init TX descriptors
|
|
for (int i = 0; i < ETH_DESC_CNT; i++) {
|
|
s_txdesc[i][2] = (uint32_t) (uintptr_t) s_txbuf[i]; // Buf pointer
|
|
s_txdesc[i][3] =
|
|
(uint32_t) (uintptr_t) s_txdesc[(i + 1) % ETH_DESC_CNT]; // Chain
|
|
}
|
|
|
|
ETH->DMABMR |= BIT(0); // Software reset
|
|
while ((ETH->DMABMR & BIT(0)) != 0) spin(1); // Wait until done
|
|
// NOTE(cpq): we do not use extended descriptor bit 7, and do not use
|
|
// hardware checksum. Therefore, descriptor size is 4, not 8
|
|
// ETH->DMABMR = BIT(13) | BIT(16) | BIT(22) | BIT(23) | BIT(25);
|
|
ETH->MACIMR = BIT(3) | BIT(9); // Mask timestamp & PMT IT
|
|
ETH->MACMIIAR = 4 << 2; // MDC clock 150-216 MHz, 38.8.1
|
|
ETH->MACFCR = BIT(7); // Disable zero quarta pause
|
|
ETH->MACFFR = BIT(31); // Receive all
|
|
eth_write_phy(PHY_ADDR, PHY_BCR, BIT(15)); // Reset PHY
|
|
eth_write_phy(PHY_ADDR, PHY_BCR, BIT(12)); // Set autonegotiation
|
|
ETH->DMARDLAR = (uint32_t) (uintptr_t) s_rxdesc; // RX descriptors
|
|
ETH->DMATDLAR = (uint32_t) (uintptr_t) s_txdesc; // RX descriptors
|
|
ETH->DMAIER = BIT(6) | BIT(16); // RIE, NISE
|
|
ETH->MACCR = BIT(2) | BIT(3) | BIT(11) | BIT(14); // RE, TE, Duplex, Fast
|
|
ETH->DMAOMR = BIT(1) | BIT(13) | BIT(21) | BIT(25); // SR, ST, TSF, RSF
|
|
}
|
|
|
|
static void mip_driver_stm32_setrx(void (*rx)(void *, size_t, void *),
|
|
void *rxdata) {
|
|
s_rx = rx;
|
|
s_rxdata = rxdata;
|
|
}
|
|
|
|
static uint32_t s_txno;
|
|
static size_t mip_driver_stm32_tx(const void *buf, size_t len, void *userdata) {
|
|
if (len > sizeof(s_txbuf[s_txno])) {
|
|
printf("%s: frame too big, %ld\n", __func__, (long) len);
|
|
len = 0; // Frame is too big
|
|
} else if ((s_txdesc[s_txno][0] & BIT(31))) {
|
|
printf("%s: no free descr\n", __func__);
|
|
len = 0; // All descriptors are busy, fail
|
|
} else {
|
|
memcpy(s_txbuf[s_txno], buf, len); // Copy data
|
|
s_txdesc[s_txno][1] = (uint32_t) len; // Set data len
|
|
s_txdesc[s_txno][0] = BIT(20) | BIT(28) | BIT(29) | BIT(30); // Chain,FS,LS
|
|
s_txdesc[s_txno][0] |= BIT(31); // Set OWN bit - let DMA take over
|
|
if (++s_txno >= ETH_DESC_CNT) s_txno = 0;
|
|
}
|
|
uint32_t sr = ETH->DMASR;
|
|
if (sr & BIT(2)) ETH->DMASR = BIT(2), ETH->DMATPDR = 0; // Resume
|
|
if (sr & BIT(5)) ETH->DMASR = BIT(5), ETH->DMATPDR = 0; // if busy
|
|
if (len == 0) printf("E: D0 %lx SR %lx\n", (long) s_txdesc[0][0], (long) sr);
|
|
return len;
|
|
(void) userdata;
|
|
}
|
|
|
|
static bool mip_driver_stm32_status(void *userdata) {
|
|
uint32_t bsr = eth_read_phy(PHY_ADDR, PHY_BSR);
|
|
return bsr & BIT(2) ? 1 : 0;
|
|
(void) userdata;
|
|
}
|
|
|
|
void ETH_IRQHandler(void);
|
|
void ETH_IRQHandler(void) {
|
|
volatile uint32_t sr = ETH->DMASR;
|
|
if (sr & BIT(6)) { // Frame received, loop
|
|
for (uint32_t i = 0; i < ETH_DESC_CNT; i++) {
|
|
if (s_rxdesc[i][0] & BIT(31)) continue;
|
|
uint32_t len = ((s_rxdesc[i][0] >> 16) & (BIT(14) - 1));
|
|
// printf("%lx %lu %lx %lx\n", i, len, s_rxdesc[i][0], sr);
|
|
if (s_rx != NULL) s_rx(s_rxbuf[i], len > 4 ? len - 4 : len, s_rxdata);
|
|
s_rxdesc[i][0] = BIT(31);
|
|
}
|
|
}
|
|
if (sr & BIT(7)) ETH->DMARPDR = 0; // Resume RX
|
|
ETH->DMASR = sr & ~(BIT(2) | BIT(7)); // Clear status
|
|
}
|
|
|
|
struct mip_driver mip_driver_stm32 = {.init = mip_driver_stm32_init,
|
|
.tx = mip_driver_stm32_tx,
|
|
.rxcb = mip_driver_stm32_setrx,
|
|
.status = mip_driver_stm32_status};
|
|
#endif // MG_ENABLE_MIP
|