Check response code, make sure it's 101.
Pass http_message to the client to keep it appraised.
This represents a slight change in the API -
in case of an error MG_EV_WEBSOCKET_HANDSHAKE_DONE will now be delivered where previosuly connection would just hang.
Clients that do not examine the argument may for a moment think handshake has succeeded but in fact connection will be closed immediately.
CL: mg: Fix handling of WS handshake error response
PUBLISHED_FROM=645a43d9e5bee216e54411f85827c9b974e9a7d1
cs_log_set_filter() is removed in favor of cs_log_set_file_level() which
allows setting log verbosity of individual files and/or lines.
E.g.: `mg_=1,mjs=1,=4` - level for for everything except mjs and mongoose.
We use the fact that we are usually pretty careful with our file names and use prefixes consistently.
In mos, `debug.file_level` sets the option on boot and `Sys.SetDebug` is updated to parse `file_level` option to change it at runtime.
CL: Log file:line instead of function; add cs_log_set_file_level()
PUBLISHED_FROM=49f18d4d0d3dd224865129a4f8fe6cccd1d9bc12
If user throttles receive by setting recv_mbuf_limit,
after the net interface reports connection as closed we must wait
for data to trickle through before disposing of it.
There can still b data in the buffers (e.g. SSL).
CL: mg: Ensure that user sees all the data before connection is closed
PUBLISHED_FROM=22be0fa368950a9fdb03cfb00febc7c0a1674b01
It can specify how much data was actually processed and the rest will be re-delivered on next poll.
CL: mg: Add ability for multipart data handler to provide pushback
PUBLISHED_FROM=e0168c5064c3a32921c9209bc09f4da2079cd616
Can be used for cases where device has no networking but mongoose is still needed for its event loop.
CL: mg: Add net_if_null, a no-op net interface
PUBLISHED_FROM=e79b4a8667508bbde1437dda9dad77ce3a3aa630
* Change return type of mg_mgr_poll to return number of events
* Add mg_mgr_min_timer
* Refactor main poll loop to remove LwIP-specific stuff
CL: Refactor mg polling
PUBLISHED_FROM=dc94618b32fa3c84a2f053bd04d134297780ec82
A major cleanup, disentangling net_if and ssl_if.
Pulled a lot of common logic into the core and reduced size of net_if implementations.
CL: Mongoose net_if and ssl_if refactoring
PUBLISHED_FROM=29bd4dcb264a1fd96b3dd164e2d880e1c2c0921e
* Limit total amount of headroom, in absolute terms (`MBUF_SIZE_MAX_HEADROOM`).
* If unable to allocate with headroom, fall back to allocating the required minimum.
* For mOS, set default `MBUF_SIZE_MULTIPLIER` to 2 to avoid floating point operations.
Since max headroom size is now capped to 128 bytes, this will not result in much of a bloat.
PUBLISHED_FROM=11d4fc65a46a805bb7c8960f89a3d0b753c58bb8
Which is a replacement of (deprecated) `mg_http_parse_header`, but,
similarly to `asprintf`, allocates a new buffer if the client-provided
one is not large enough.
Also use it throughout mongoose code, and thus some header-related
limitations are removed; in particular,
https://github.com/cesanta/mongoose/issues/813 is fixed.
CL: Mongoose Web Server: Deprecate `mg_http_parse_header()` and implement `mg_http_parse_header2()` instead, which allocates a new buffer if the client-provided one is not large enough (similarly to `asprintf`).
CL: Mongoose Web Server: Fix limitations of header value lengths, e.g. when parsing authentication headers such as nonce, etc.
PUBLISHED_FROM=c75b1bbbbdb294ea85075ce69b1368f115fdd1ef
In certain files it was necessary to make tests work from public
mongoose repo, so this commit makes things consistent.
PUBLISHED_FROM=694454d0ff007229c65d524a2a2beaf126420f15
CL: Mongoose Web Server: Digest authentication: Fix nonce validity check (expired nonce or nonce from the future did not cause the the check to fail)
CL: Mongoose Web Server: Digest authentication: Fix nonce request value; it worked before because nonce validity check was broken as well
CL: Mongoose Web Server: Digest authentication: Add `nonce` argument to `mg_http_create_digest_auth_header()`: clients should use the value received from the server's authentication request.
Resolves https://github.com/cesanta/mongoose/issues/809
PUBLISHED_FROM=5e59f90ed6b2a4311ed6763159da81c2aaf6af4c
CL: Mongoose Web Server: Websocket: Respond to Ping with Pong
CL: Mongoose Web Server: Websocket: Properly close a connection with Close frame (in response to a client's close and when protocol failure is detected)
CL: Mongoose Web Server: Websocket: Fix support of fragmented messages
CL: Mongoose Web Server: Websocket: Add support for control frames interjected in the middle of a fragmented message
PUBLISHED_FROM=e2b3794aaacc64633540c493194cccc62afa2077
Add checks on the number of subscribe requests per packet and overall per-session subscription limit.
PUBLISHED_FROM=faaf5c50af31a0694c9308a664f2e418dbb0eb18
For now, we only support SPIFFS-in-a-box, same as CC3200.
On CC3200SF it should be possible to have SPIFFS on built-in flash, but that is left for later.
PUBLISHED_FROM=dee337c8cd8ed288c22abe9960eef81e6e90cc4a
Achievement unlocked: CC3220 port prints a boot banner.
Then locks up.
Included in this PR is refactoring to pull out common parts to be shared with CC3200.
PUBLISHED_FROM=5fb9d9a00bb9ce7f63dde20bc1876076b76d5257
Fixed bug in websocket handshake:
now adding Sec-WebSocket-Protocol header in handshake response.
PUBLISHED_FROM=e4a71ff9dc4aeec63db40cb7f356dc5b25c1215a
With different filesystem implementations and storage drivers, like grown-ups have :)
This is not currently used to add any new functionality, we still have
only one FS and driver on ESP8266 and ESP32; CC3200 has two: SPIFFS and SLFS.
This will be used soon to implement filesystems on additional SPI flash chips and SD cards.
PUBLISHED_FROM=293960fef82952c505e9b1925aac7724c7308362
Rationale: this is the optimisation to make JS FFI-ed API
work nicer. We don't have strucuture introspection now,
and do not generate offsets automatially. Thus, using a
stable well-known location of the parsed message body is
better, in case of number of HTTP headers macro changes.
PUBLISHED_FROM=55bf25ac77060a9c81dfecd6601f037562530801
Remove the specialized URI parser, clean up code a bit.
Fix parsing of URIs with IPv6 hosts (http://[2001:2:3::4]:567/)
PUBLISHED_FROM=968ad97585d928123106ce3828920ee073113f83
If http.auth_{domain,file} are configured, all HTTP requests require valid digest authorization header.
This applies to files served by mg_http_serve as well as synamic endpoints such as /update and /rpc.
mongoose-os#229
PUBLISHED_FROM=824d594147cfeb2428b463d24478b207839aa5e2
Fixed a bunch of things to make OTA work on ESP32 with flash encryption:
writes to app aprtitions must be 32-byte aligned and mod 32 in size.
When merging filesystems during update, use spiffs_vfs_* functions so
that old fs is properly decrypted.
Refactored cs_dirent stuff: SPIFFS support moved to spiffs_vfs.c,
added dirent.h on ESP8266 and CC3200 which includes cs_dirent.h
Define DIR and dirent only if asked (ESP8266, CC3200, WIN32).
PUBLISHED_FROM=58b0d05cdc41b1a9e02d341e2a1cdcb012829232
cesanta/esp-idf is rebased onto espressif/esp-idf#aece3d6fc62fd91d3c5a87e0ab2ddb5ac51d8ff0
A few wifi changes and VFS support for directory-related functions.
PUBLISHED_FROM=7823db802945122aa1b5453da8abd8e380cbf2fa
Factor out common part of SPIFFS libc interface support from the CC3200
port and reuse it for ESP32. Minor cleanups.
PUBLISHED_FROM=19ad4049372f83046abd8eba29cfc7c2cc405671
Namely, define it if only `MG_ENABLE_HTTP_STREAMING_MULTIPART` and
`MG_ENABLE_FILESYSTEM` are on
PUBLISHED_FROM=3094738a4b76ceb09a3c2374e8d9d914b71c3441
And use it for `FW_ARCHITECTURE`. This is needed because with
Microchip's xc32, `-DFOO=\"bar\"` results in `FOO` being `bar`, not
`"bar"`, so we have to stringify differently.
PUBLISHED_FROM=d0aeebb55ef9e0e92a7f750104cd6600e0d9c636
Also performs trnasparent SPIFFS -> SLFS cert copy.
If the file's extension is .pem, convert it to DER format and put on SLFS.
PUBLISHED_FROM=364caab21969ca28a05802c4dde93a11d1e0feda
Also fixed a memory leak on reconnect: previously, each reconnect was
creating a `struct mg_connection` which was never reclaimed
PUBLISHED_FROM=eefdcf557e032ac81d5ed3aba55ac912e400148e
Now all warnings are disabled on SDK files, and enabled on our
application's files.
Fixed a couple of things in nRF52 which were unnoticed because all
warnings were disabled there from the beginning.
PUBLISHED_FROM=a33ab22d0ce85efea364b80478986b88f4b0a3a2
LWIP part has been finally fully split from the ESP part, and ESP
platform defs reduced to bare minimum. It is now possible to use LWIP
in either low-level or socket mode without any ESP dependencies,
and NXP Kinetis platform is the first to make use of it.
PUBLISHED_FROM=4a9055897609c812296bdab5b4943ffde641ced2
Possible values:
MG_NET_IF_SOCKET (1) - traditional BSD socket API
MG_NET_IF_SIMPLELINK (2) - TI's SimpleLink socket interface
MG_NET_IF_LWIP_LOW_LEVEL - a net_if implementation that uses LWIP's
low-level API, when LWIP_SOCKET is not available.
PUBLISHED_FROM=a5c0aebb7b6bdb1f1f4cb3210763d16f3ab5e133
Factor out SSI and WS code from http.c
HTTP + WS are enabled by default, but MQTT is built without HTTP
support as a compilation test.
PUBLISHED_FROM=925ed9a55abb193ed7deac1c9675a0e5b35dca50
"#if FOO" still works with simple -DFOO, but gives more flexibility.
Specifically, if user expressed no preference (FOO is not defined),
we can apply reasonable defaults (this is the legitimate use of ifdef).
In short, from now on, please use
#if MG_ENABLE_FOO
instead of
#ifdef MG_ENABLE_FOO
Since we are all used to #ifdef, this change also adds a precommit check
to police this. Specifically, in *.h and *.c files that are Copyright Cesanta,
"ifdef" and "if defined()" are not allowed to be used with macros that contain
ENABLE or DISABLE, unless the like also contains "ifdef-ok".
Hence, if you are sure you want to use ifdef, use this:
#ifdef MG_ENABLE_FOO /* ifdef-ok */
PUBLISHED_FROM=9be829448f53cff575d6cae8b9945fb12531c15a
esp_mg_net_if was a rat's nest of mongoose net_if and event manager
implementaions and the event loop task for the ESP8266 miot port.
From that, pieces that are related to LWIP support have been pulled out,
separated into net_if and event manager files, and event loop task
has been moved under the miot esp8266 dirrectory.
This is done to facilitate LWIP code reuse. This may not be the end of
it, but it's a start.
Note: custom retransmit logic has been removed for now. Can be
reintroduced later is necessary.
PUBLISHED_FROM=fd5bbf75714583ce95776d4c76b6c5b5dc535364
This is the variant of MG_EV_SSI_CALL with context of the SSI call being
processed in addition to the tag argument. Specifically, call handler
now gets access to the HTTP request and the name of the file being processed.
MG_EV_SSI_CALL is preserved for backward compatibility.
PUBLISHED_FROM=eeea7487c062505abdb23b6f64994ff7a6b60ff8
Make paths embedded in amalgamated files nice and relative.
This facilitates subsequent clean un- and re-amalgamation.
PUBLISHED_FROM=d83e6000617c54ceaeb78b80c25814996043fe66
On my way, fixed a couple of cases where we had `()` in the header, and
non-empty argument list in the source file.
PUBLISHED_FROM=5519526cf84e2bbd425a726fcc112fea1a95cbf1
Complete rewrite of the C Clubby implementation: it is now modeled after
the Go implementation, with a slight difference that codec and channel
are the same object (something we should probably do in Go as well, as
we only have a single type of channel so far, which is used with all
types of codecs).
This implementation also comes with a new external API,
which is hopefully cleaner and easier to use (see mg_clubby.h).
In this PR I am not adding any new types of channels, but a UART channel
as well as websocket listener channel will be added after this lands.
PUBLISHED_FROM=d545d4bb6434e2a02ad159f9e4b64e594a4797e7
Use the same config mechanism for ro_vars as for sys_config, get rid of a bunch of custom code.
PUBLISHED_FROM=d2be76cb97090669dd6a21e95d0ba821eaa1a313
Do not use CA bundle on CC3200, it doesn't work.
Make ssl_ca_cert = "*" mean "no verification" and make sure
SSL is enabled on the connection when it's required, even w/o verification.
PUBLISHED_FROM=c8710a5d24ecfe174ef45b7f81c114d41faf5c12
SimpleLink restart invalidates all sockets.
Listeners are restarted, outgoing connections are closed.
PUBLISHED_FROM=15567dfb822bffbd44d39ba0e69a7ac64fd7a1c8
SimpleLink sockets are suffciently different from BSD that all the
ifdefs have become too messy to warrant a separate net_if
implementation. As part of this we also implement proper async connect
support.
Added MG_F_SSL to identify SSL-enabled connections in a generic way,
since SSL state can be different depending on the implementation.
PUBLISHED_FROM=9cdb8c880b90683e4a26b972cf439d47d6f60917
SL requires cert and key to be separate files in DER format.
Date verification is disabled for now.
PUBLISHED_FROM=7d76150ed356140728a1e5fd82d8a0456347b7dc
Make restful_server and netcat examples compilation tests:
- netcat doesn't use HTTP, compile it with MG_DISABLE_HTTP
- restful_server doesn't use websocket, compile it with
MG_DISABLE_HTTP_WEBSOCKET
h/t @labourcier, cesanta/mongoose#665
PUBLISHED_FROM=4494ac3cbd81e8314beb557ab301b4b44c4afb89
`v7_mk_undefined()` and `v7_mk_null()` are left unchanged, but marked
deprecated, and `V7_UNDEFINED` and `V7_NULL` are public now.
Xtensa code size with instrumentation: 590400 -> 590432, i.e. 32 bytes.
Xtensa code size without instrumentation: 530848 -> 531760, i.e. 912
bytes.
As objdump reveals, inside v7.c, `v7_mk_number` and others are inlined,
so the extra v7 argument is eliminated; outside of v7.c it's obviously
not inlined.
----
Also, v7_get_int() is added, which currently just casts stored double
value to int
PUBLISHED_FROM=e984b7308faf2380b3de388f238e0fae0aea545d
We used to declare these functions twice: in plaform_windows.h
and cs_dirent.h. Removed decl from platform_windows.h and moved
cs_dirent.h to be privately included by mongoose.c
PUBLISHED_FROM=ab62370409e29e3c62a8b8eab0f75795b5d7ed0f
Part of general drive to use mg_str instead of pointer + length.
Adda unit test for mg_match_prefix.
PUBLISHED_FROM=1402506769b0941c6dbe6ae06e03e41df32d6008
And use stdout for CC3200 demo because
(1) an apparent bug which causes output sent to stderr to be
printed v-e-r-y s-l-o-w-l-y (yes, it is really like that;
https://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/501881)
(2) in CCS it is printed in BLOOD RED, which is annoying
PUBLISHED_FROM=36a86744bc8ea193e99e98670dadc7f3ab6ed53e
Moved filesystem-related code out of SJS and into common.
Made it possible to have one, both or no filesystems enabled.
FailFS is now SimpleLinkFS, SLFS (ahem).
Example just serves a "Hello, world!" index page for now.
PUBLISHED_FROM=0e98ee4b8d95782c10791522c42eae5a7ba314f9
Timers/intervals are now implemented on top of Mongoose.
Got rid of all the platform-specific code (yay!)
Added interval support and ability to clear previously added timeouts.
PUBLISHED_FROM=93866dd80b95b0fa6e137d87f86138330e720154
Increase heap size to 44K (13K free after init)
Add File.list() support
Fix a bunch of bugs in file support
Disable sys_init.js, there just isn't enough RAM...
PUBLISHED_FROM=2121b8758f0596da39c3eafcfff36337a1b90b74
Contributed by @f4bsch in https://github.com/cesanta/mongoose/pull/626
Submitting here with a minor change: MSDN says that ws2ipdef.h should
not be included directly and users should include ws2tcpip.h
PUBLISHED_FROM=1ebe7eac0cf87b0554432b94049b3d58bf7640f7
Identifiers starting with _ are reserved, fix those.
Wrote a tool to do it and applied it globally, why not.
PUBLISHED_FROM=db0fa27c90cbfb06ed06469406f9867c5a5bd3c4
