3party/mongoose
0
0
Fork 0
mirror of https://github.com/cesanta/mongoose.git synced 2024-12-26 22:41:03 +08:00
Code Issues Projects Releases Wiki Activity

Merge pull request #2766 from cesanta/xmc7

Browse Source 
add 100/10M
This commit is contained in:
Sergio R. Caprile 2024-05-27 15:14:44 -03:00 committed by GitHub
commit 8085e21a05
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
4 changed files with 48 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.github/workflows/nightly.yml vendored
View File

@ -369,6 +369,7 @@ jobs:
matrix:
ssl: ["", -DMG_TLS=MG_TLS_BUILTIN]
example:
- path: infineon/infineon-xmc7200
- path: microchip/same54-xpro/device-dashboard
- path: nxp/rt1020-evk-make-baremetal-builtin
- path: nxp/rt1020-evk-make-freertos-builtin

1
.github/workflows/quicktest.yml vendored
View File

@ -241,6 +241,7 @@ jobs:
fail-fast: false
matrix:
example:
- path: infineon/infineon-xmc7200
- path: microchip/same54-xpro/device-dashboard
- path: nxp/rt1020-evk-make-baremetal-builtin
- path: nxp/rt1020-evk-make-freertos-builtin

32
mongoose.c
View File

@ -17468,14 +17468,14 @@ static bool mg_tcpip_driver_xmc7_init(struct mg_tcpip_if *ifp) {
s_ifp = ifp;
// enable controller, set RGMII mode
ETH0->CTL = MG_BIT(31) | 2;
ETH0->CTL = MG_BIT(31) | (4 << 8) | 2;
uint32_t cr = get_clock_rate(d);
// set NSP change, ignore RX FCS, data bus width, clock rate
// frame length 1536, full duplex, speed
ETH0->NETWORK_CONFIG = MG_BIT(29) | MG_BIT(26) | MG_BIT(21) |
((cr & 7) << 18) | MG_BIT(8) | MG_BIT(4) |
MG_BIT(1) | MG_BIT(0);
((cr & 7) << 18) | MG_BIT(8) | MG_BIT(4) | MG_BIT(1) |
MG_BIT(0);
// config DMA settings: Force TX burst, Discard on Error, set RX buffer size
// to 1536, TX_PBUF_SIZE, RX_PBUF_SIZE, AMBA_BURST_LENGTH
@ -17559,15 +17559,30 @@ static bool mg_tcpip_driver_xmc7_up(struct mg_tcpip_if *ifp) {
struct mg_phy phy = {eth_read_phy, eth_write_phy};
up = mg_phy_up(&phy, d->phy_addr, &full_duplex, &speed);
if ((ifp->state == MG_TCPIP_STATE_DOWN) && up) { // link state just went up
// tmp = reg with flags set to the most likely situation: 100M full-duplex
// if(link is slow or half) set flags otherwise
// reg = tmp
uint32_t netconf = ETH0->NETWORK_CONFIG;
MG_SET_BITS(netconf, MG_BIT(10),
MG_BIT(1) | MG_BIT(0)); // 100M, Full-duplex
uint32_t ctl = ETH0->CTL;
MG_SET_BITS(ctl, 0xFF00, 4 << 8); // /5 for 25M clock
if (speed == MG_PHY_SPEED_1000M) {
ETH0->NETWORK_CONFIG |= MG_BIT(10);
}
netconf |= MG_BIT(10); // 1000M
MG_SET_BITS(ctl, 0xFF00, 0); // /1 for 125M clock TODO() IS THIS NEEDED ?
} else if (speed == MG_PHY_SPEED_10M) {
netconf &= ~MG_BIT(0); // 10M
MG_SET_BITS(ctl, 0xFF00, 49); // /50 for 2.5M clock
}
if (full_duplex == false) netconf &= ~MG_BIT(1); // Half-duplex
ETH0->NETWORK_CONFIG = netconf; // IRQ handler does not fiddle with these
ETH0->CTL = ctl;
MG_DEBUG(("Link is %uM %s-duplex",
speed == MG_PHY_SPEED_10M ? 10 :
(speed == MG_PHY_SPEED_100M ? 100 : 1000),
speed == MG_PHY_SPEED_10M
? 10
: (speed == MG_PHY_SPEED_100M ? 100 : 1000),
full_duplex ? "full" : "half"));
}
(void) d;
return up;
}
@ -17577,7 +17592,6 @@ void ETH_IRQHandler(void) {
for (uint8_t i = 0; i < ETH_DESC_CNT; i++) {
if (s_rxdesc[s_rxno][0] & MG_BIT(0)) {
size_t len = s_rxdesc[s_rxno][1] & (MG_BIT(13) - 1);
//MG_INFO(("Receive complete: %ld bytes", len));
mg_tcpip_qwrite(s_rxbuf[s_rxno], len, s_ifp);
s_rxdesc[s_rxno][0] &= ~MG_BIT(0); // OWN bit: handle control to DMA
if (++s_rxno >= ETH_DESC_CNT) s_rxno = 0;

32
src/drivers/xmc7.c
View File

@ -95,14 +95,14 @@ static bool mg_tcpip_driver_xmc7_init(struct mg_tcpip_if *ifp) {
s_ifp = ifp;
// enable controller, set RGMII mode
ETH0->CTL = MG_BIT(31) | 2;
ETH0->CTL = MG_BIT(31) | (4 << 8) | 2;
uint32_t cr = get_clock_rate(d);
// set NSP change, ignore RX FCS, data bus width, clock rate
// frame length 1536, full duplex, speed
ETH0->NETWORK_CONFIG = MG_BIT(29) | MG_BIT(26) | MG_BIT(21) |
((cr & 7) << 18) | MG_BIT(8) | MG_BIT(4) |
MG_BIT(1) | MG_BIT(0);
((cr & 7) << 18) | MG_BIT(8) | MG_BIT(4) | MG_BIT(1) |
MG_BIT(0);
// config DMA settings: Force TX burst, Discard on Error, set RX buffer size
// to 1536, TX_PBUF_SIZE, RX_PBUF_SIZE, AMBA_BURST_LENGTH
@ -186,15 +186,30 @@ static bool mg_tcpip_driver_xmc7_up(struct mg_tcpip_if *ifp) {
struct mg_phy phy = {eth_read_phy, eth_write_phy};
up = mg_phy_up(&phy, d->phy_addr, &full_duplex, &speed);
if ((ifp->state == MG_TCPIP_STATE_DOWN) && up) { // link state just went up
// tmp = reg with flags set to the most likely situation: 100M full-duplex
// if(link is slow or half) set flags otherwise
// reg = tmp
uint32_t netconf = ETH0->NETWORK_CONFIG;
MG_SET_BITS(netconf, MG_BIT(10),
MG_BIT(1) | MG_BIT(0)); // 100M, Full-duplex
uint32_t ctl = ETH0->CTL;
MG_SET_BITS(ctl, 0xFF00, 4 << 8); // /5 for 25M clock
if (speed == MG_PHY_SPEED_1000M) {
ETH0->NETWORK_CONFIG |= MG_BIT(10);
}
netconf |= MG_BIT(10); // 1000M
MG_SET_BITS(ctl, 0xFF00, 0); // /1 for 125M clock TODO() IS THIS NEEDED ?
} else if (speed == MG_PHY_SPEED_10M) {
netconf &= ~MG_BIT(0); // 10M
MG_SET_BITS(ctl, 0xFF00, 49); // /50 for 2.5M clock
}
if (full_duplex == false) netconf &= ~MG_BIT(1); // Half-duplex
ETH0->NETWORK_CONFIG = netconf; // IRQ handler does not fiddle with these
ETH0->CTL = ctl;
MG_DEBUG(("Link is %uM %s-duplex",
speed == MG_PHY_SPEED_10M ? 10 :
(speed == MG_PHY_SPEED_100M ? 100 : 1000),
speed == MG_PHY_SPEED_10M
? 10
: (speed == MG_PHY_SPEED_100M ? 100 : 1000),
full_duplex ? "full" : "half"));
}
(void) d;
return up;
}
@ -204,7 +219,6 @@ void ETH_IRQHandler(void) {
for (uint8_t i = 0; i < ETH_DESC_CNT; i++) {
if (s_rxdesc[s_rxno][0] & MG_BIT(0)) {
size_t len = s_rxdesc[s_rxno][1] & (MG_BIT(13) - 1);
//MG_INFO(("Receive complete: %ld bytes", len));
mg_tcpip_qwrite(s_rxbuf[s_rxno], len, s_ifp);
s_rxdesc[s_rxno][0] &= ~MG_BIT(0); // OWN bit: handle control to DMA
if (++s_rxno >= ETH_DESC_CNT) s_rxno = 0;