Merge pull request #2121 from cesanta/nomip-collateral

remove references to MIP in examples (comments)

examples/arduino/w5500/w5500.ino

@@ -9,7 +9,7 @@ struct mg_tcpip_spi spi = {
     [](void *) { digitalWrite(SS_PIN, HIGH); },         // end transaction
     [](void *, uint8_t c) { return SPI.transfer(c); },  // execute transaction
 };
-struct mg_tcpip_if mif = {.mac = {2, 0, 1, 2, 3, 5}};  // MIP network interface
+struct mg_tcpip_if mif = {.mac = {2, 0, 1, 2, 3, 5}};  // network interface
 
 void setup() {
   Serial.begin(115200);

examples/rp2040/pico-rmii/main.c

@@ -24,10 +24,10 @@ int main(void) {
   stdio_init_all();
 
   struct mg_mgr mgr;        // Initialise Mongoose event manager
-  mg_mgr_init(&mgr);        // and attach it to the MIP interface
+  mg_mgr_init(&mgr);        // and attach it to the interface
   mg_log_set(MG_LL_DEBUG);  // Set log level
 
-  MG_INFO(("Init MIP"));
+  MG_INFO(("Init TCP/IP"));
   // Initialise Mongoose network stack and specific driver
   // Set consecutive GPIOs for RMII (tx and rx) and SMI function groups
   struct mg_tcpip_driver_rp2040_rmii_data driver_data = {

examples/rp2040/pico-rndis-dashboard/main.c

@@ -53,7 +53,7 @@ int main(void) {
   stdio_init_all();
 
   struct mg_mgr mgr;  // Initialise Mongoose event manager
-  mg_mgr_init(&mgr);  // and attach it to the MIP interface
+  mg_mgr_init(&mgr);  // and attach it to the interface
   mg_timer_add(&mgr, 500, MG_TIMER_REPEAT, blink_cb, &mgr);
 
   struct mg_tcpip_driver driver = {.tx = usb_tx, .up = usb_up};

examples/stm32/nucleo-f429zi-freertos/main.c

@@ -45,7 +45,7 @@ static void ethernet_init(void) {
 
 static void server(void *args) {
   struct mg_mgr mgr;        // Initialise Mongoose event manager
-  mg_mgr_init(&mgr);        // and attach it to the MIP interface
+  mg_mgr_init(&mgr);        // and attach it to the interface
   mg_log_set(MG_LL_DEBUG);  // Set log level
 
   // Initialise Mongoose network stack

examples/stm32/nucleo-f746zg-freertos/main.c

@@ -45,7 +45,7 @@ static void ethernet_init(void) {
 
 static void server(void *args) {
   struct mg_mgr mgr;        // Initialise Mongoose event manager
-  mg_mgr_init(&mgr);        // and attach it to the MIP interface
+  mg_mgr_init(&mgr);        // and attach it to the interface
   mg_log_set(MG_LL_DEBUG);  // Set log level
 
   // Initialise Mongoose network stack

examples/ti/ek-tm4c1294xl-baremetal/README.md

@@ -1,47 +1 @@
-# Baremetal webserver on EK-TM4C1294XL
+See detailed tutorial at https://mongoose.ws/tutorials/ti/ek-tm4c1294xl-baremetal/
-
-This firmware uses experimental TCP/IP stack of the Mongoose Network Library,
-which implements the following:
-
-- A complete [HTTP device dashboard](../../device-dashboard) with:
-  - User authentication
-  - Real-time device data graph
-  - Coninfiguration display and update
-  - MQTT communication with a remote MQTT server
-- No dependencies: no HAL, no CMSIS, no RTOS
-- Hand-written [mcu.h](mcu.h) header based on the [datasheet](https://www.ti.com/lit/pdf/spms433)
-- Interrupt-driven Ethernet driver
-- LED blinky, based on SysTick interrupt
-- User button handler, turns off/on an LED, based on GPIO IRQs (interrupt-driven)
-- HardFault handler alternate blinks LEDs
-- Debug log on UART0 (ICDI)
-
-## Requirements
-
-- [GNU make](http://mongoose.ws/tutorials/tools/#gnu-make)
-- [ARM GCC](http://mongoose.ws/tutorials/tools/#arm-gcc)
-- [Uniflash](https://mongoose.ws/tutorials/ti/ek-tm4c1294xl-baremetal/#build-and-run) for flashing
-
-The links above will send you to tutorials on how to install each of those tools in your workstation for Linux, Mac, and Windows.
-
-
-## Usage
-
-Plugin your board into USB, and attach an Ethernet cable.
-To build:
-
-```sh
-$ make clean build
-```
-
-To flash: use Uniflash
-
-To see debug log, use any serial monitor program like `picocom` at 115200 bps and configure it to insert carriage returns after line feeds:
-
-```sh
-$ picocom /dev/ttyACM0 -i -b 115200 --imap=lfcrlf
-```
-
-There is also a [detailed tutorial on this example](https://mongoose.ws/tutorials/ti/ek-tm4c1294xl-baremetal/)
-
-For more details and benchmark data on MIP, check the [F746ZG example](../../stm32/nucleo-f746zg-baremetal/)

examples/ti/ek-tm4c1294xl-freertos/main.c

@@ -48,7 +48,7 @@ static void ethernet_init(void) {
 
 static void server(void *args) {
   struct mg_mgr mgr;        // Initialise Mongoose event manager
-  mg_mgr_init(&mgr);        // and attach it to the MIP interface
+  mg_mgr_init(&mgr);        // and attach it to the interface
   mg_log_set(MG_LL_DEBUG);  // Set log level
 
   // Initialise Mongoose network stack