mirror of
https://github.com/zeromq/libzmq.git
synced 2024-12-28 07:58:14 +08:00
6c393f53e2
This reverts commit 13f3481e127a6b2390e847af6b01ee88f1b4ae61. Conflicts: doc/zmq_device.txt doc/zmq_tcp.txt
159 lines
5.1 KiB
Plaintext
159 lines
5.1 KiB
Plaintext
zmq_tcp(7)
|
|
==========
|
|
|
|
|
|
NAME
|
|
----
|
|
zmq_tcp - 0MQ unicast transport using TCP
|
|
|
|
|
|
SYNOPSIS
|
|
--------
|
|
TCP is an ubiquitous, reliable, unicast transport. When connecting distributed
|
|
applications over a network with 0MQ, using the TCP transport will likely be
|
|
your first choice.
|
|
|
|
|
|
ADDRESSING
|
|
----------
|
|
A 0MQ address string consists of two parts as follows:
|
|
'transport'`://`'endpoint'. The 'transport' part specifies the underlying
|
|
transport protocol to use, and for the TCP transport shall be set to `tcp`.
|
|
The meaning of the 'endpoint' part for the TCP transport is defined below.
|
|
|
|
|
|
Assigning a local address to a socket
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
When assigning a local address to a socket using _zmq_bind()_ with the 'tcp'
|
|
transport, the 'endpoint' shall be interpreted as an 'interface' followed by a
|
|
colon and the TCP port number to use.
|
|
|
|
An 'interface' may be specified by either of the following:
|
|
|
|
* The wildcard `*`, meaning all available interfaces.
|
|
* The primary IPv4 address assigned to the interface, in its numeric
|
|
representation.
|
|
* The interface name as defined by the operating system.
|
|
|
|
NOTE: Interface names are not standardised in any way and should be assumed to
|
|
be arbitrary and platform dependent. On Win32 platforms no short interface
|
|
names exist, thus only the primary IPv4 address may be used to specify an
|
|
'interface'.
|
|
|
|
Connecting a socket
|
|
~~~~~~~~~~~~~~~~~~~
|
|
When connecting a socket to a peer address using _zmq_connect()_ with the 'tcp'
|
|
transport, the 'endpoint' shall be interpreted as a 'peer address' followed by
|
|
a colon and the TCP port number to use.
|
|
|
|
A 'peer address' may be specified by either of the following:
|
|
|
|
* The DNS name of the peer.
|
|
* The IPv4 address of the peer, in it's numeric representation.
|
|
|
|
|
|
WIRE FORMAT
|
|
-----------
|
|
0MQ messages are transmitted over TCP in frames consisting of an encoded
|
|
'payload length', followed by a 'flags' field and the message body. The 'payload
|
|
length' is defined as the combined length in octets of the message body and the
|
|
'flags' field.
|
|
|
|
For frames with a 'payload length' not exceeding 254 octets, the 'payload
|
|
length' shall be encoded as a single octet. The minimum valid 'payload length'
|
|
of a frame is 1 octet, thus a 'payload length' of 0 octets is invalid and such
|
|
frames SHOULD be ignored.
|
|
|
|
For frames with a 'payload length' exceeding 254 octets, the 'payload length'
|
|
shall be encoded as a single octet with the value `255` followed by the
|
|
'payload length' represented as a 64-bit unsigned integer in network byte
|
|
order.
|
|
|
|
The 'flags' field consists of a single octet containing various control flags:
|
|
|
|
Bit 0 (MORE): _More message parts to follow_. A value of 0 indicates that there
|
|
are no more message parts to follow; or that the message being sent is not a
|
|
multi-part message. A value of 1 indicates that the message being sent is a
|
|
multi-part message and more message parts are to follow.
|
|
|
|
Bits 1-7: _Reserved_. Bits 1-7 are reserved for future expansion and MUST be
|
|
set to zero.
|
|
|
|
The following ABNF grammar represents a single 'frame':
|
|
|
|
....
|
|
frame = (length flags data)
|
|
length = OCTET / (escape 8OCTET)
|
|
flags = OCTET
|
|
escape = %xFF
|
|
data = *OCTET
|
|
....
|
|
|
|
The following diagram illustrates the layout of a frame with a 'payload length'
|
|
not exceeding 254 octets:
|
|
|
|
....
|
|
0 1 2 3
|
|
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
| Payload length| Flags | Message body ... |
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
| Message body ...
|
|
+-+-+-+-+-+-+- ...
|
|
....
|
|
|
|
The following diagram illustrates the layout of a frame with a 'payload length'
|
|
exceeding 254 octets:
|
|
|
|
....
|
|
0 1 2 3
|
|
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
| 0xff | Payload length ... |
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
| Payload length ... |
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
| Payload length| Flags | Message body ... |
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
| Message body ...
|
|
+-+-+-+-+-+-+-+ ...
|
|
....
|
|
|
|
|
|
EXAMPLES
|
|
--------
|
|
.Assigning a local address to a socket
|
|
----
|
|
/* TCP port 5555 on all available interfaces */
|
|
rc = zmq_bind(socket, "tcp://*:5555");
|
|
assert (rc == 0);
|
|
/* TCP port 5555 on the local loopback interface on all platforms */
|
|
rc = zmq_bind(socket, "tcp://127.0.0.1:5555");
|
|
assert (rc == 0);
|
|
/* TCP port 5555 on the first ethernet network interface on Linux */
|
|
rc = zmq_bind(socket, "tcp://eth0:5555");
|
|
assert (rc == 0);
|
|
----
|
|
|
|
.Connecting a socket
|
|
----
|
|
/* Connecting using an IP address */
|
|
rc = zmq_connect(socket, "tcp://192.168.1.1:5555");
|
|
assert (rc == 0);
|
|
/* Connecting using a DNS name */
|
|
rc = zmq_connect(socket, "tcp://server1:5555");
|
|
assert (rc == 0);
|
|
----
|
|
|
|
|
|
SEE ALSO
|
|
--------
|
|
linkzmq:zmq_bind[3]
|
|
linkzmq:zmq_connect[3]
|
|
linkzmq:zmq_pgm[7]
|
|
linkzmq:zmq_ipc[7]
|
|
linkzmq:zmq_inproc[7]
|
|
linkzmq:zmq[7]
|
|
|
|
|