The new options allows querying the maximum allowed number of sockets.
This is system dependent and cannot be encoded in the include file as a
preprocessor macro: for ZMQ_USE_SELECT, this depends on the FD_SETSIZE
macro at time of library compilation, not at time of include file use.
- renamed to ZMQ_CONNECT_RID
- fixed whitespace malformating around previous patch
- renamamed next_peer_id to next_rid in preparation for
larger rename of IDENTITY to ROUTING_ID
Note: ZMQ_CONNECT_RID has no test case and no entry in the man
page, as yet.
This change simply provides the user with a socket option that sets a user defined name of the next outbound connection:
zmq_setsockopt(routerSock,ZMQ_NEXT_IDENTITY,"myname",6);
if(0 > zmq_connect(routerSock,"tcp://127.0.0.1:1234")) return 1;
ret = zmq_send(routerSock,"myname",6,ZMQ_SNDMORE);
zmq_send(routerSock,b.mem,b.used,0);
In this example, the socket is immediately given the name "myname", and is capable of immediately sending traffic.
This approach is more effective in three ways:
1) It prevents all sorts of malicious peer naming attacks that can cause undefined behavior in existing ROUTER connections. (Two connections are made that both transmit the same name to the ROUTER, the ROUTER behavior is undefined)
2) It allows immediate control of connections made to external parties for STREAM sockets. Something that is not possible right now. Before an outbound connection had no name for STREAM or ROUTER sockets because outbound connections cannot be sent to without first receiving traffic.
3) It is simpler and more general than expecting two ROUTER sockets to handshake on assigned connection names. Plus it allows inline sending to new connections on ROUTER.
- This seems redundant; is there a use case for NOT providing
the IPC credentials to the ZAP authenticator?
- More, why is IPC authentication done via libzmq instead of ZAP?
Is it because we're missing the transport type on the ZAP request?
Another take on LIBZMQ-568 to allow filtering IPC connections, this time
using ZAP. This change is backward compatible. If the
ZMQ_ZAP_IPC_CREDS option is set, the user, group, and process IDs of the
peer process are appended to the address (separated by colons) of a ZAP
request; otherwise, nothing changes. See LIBZMQ-568 and zmq_setsockopt
documentation for more information.
* ZMQ_REQ_STRICT was negative option (default 1) which goes against
the standard, where defaults are zero. I renamed this to
ZMQ_REQ_RELAXED.
* ZMQ_REQ_REQUEST_IDS felt clumsy and describes the technical solution
rather than the problem/requirement. I changed to ZMQ_REQ_CORRELATE
which seems more explicit.
* Removed redundant Z85 code and include files from project
* Simplified use of headers in test cases (now they all just use testutil.hpp)
* Export zmq_z85_encode() and zmq_z85_decode() in API
* Added man pages for these two functions
* This is passed to the ZAP handler in the 'domain' field
* If not set, or empty, then NULL security does not call the ZAP handler
* This resolves the phantom ZAP request syndrome seen with sockets where
security was never intended (e.g. in test cases)
* This means if you install a ZAP handler, it will not get any requests
for new connections until you take some explicit action, which can be
setting a username/password for PLAIN, a key for CURVE, or the domain
for NULL.
- Split off NULL security check from PLAIN
- Cleaned up test_linger code a little
- Got all tests to pass, added TODOs for outstanding issues
- Added ZAP authentication for NULL test case
- NULL mechanism was not passing server identity - fixed
- cleaned up test_security_plain and removed option double-checks (made code ugly)
- lowered timeout on expect_bounce_fail to 150 msec to speed up checks
- removed all sleeps from test_fork and simplified code (it still passes :-)
This allows making a new request on a REQ socket by sending a new
message. Without the option set, calling send() after the first message
is done will continue to return an EFSM error.
It's useful for when a REQ is not getting a response. Previously that
meant creating a new socket or switching to DEALER.
* Documentation:
The default behavior of REQ sockets is to rely on the ordering of messages
to match requests and responses and that is usually sufficient. When this option
is set to 1, the REQ socket will prefix outgoing messages with an extra frame
containing a request id. That means the full message is (request id, 0,
user frames...). The REQ socket will discard all incoming messages that don't
begin with these two frames.
* Behavior change: When a REQ socket gets an invalid reply, it used to
discard the message and return EAGAIN. REQ sockets still discard
invalid messages, but keep looking at the next one automatically
until a good one is found or there are no more messages.
* Add test_req_request_ids.
- designed for TCP clients and servers
- added HTTP client / server example in tests/test_stream.cpp
- same as ZMQ_ROUTER + ZMQ_ROUTER_RAW + ZMQ_ROUTER_MANDATORY
- includes b893ce set ZMQ_IDENTITY on outgoing connect
- deprecates ZMQ_ROUTER_RAW
- ZMQ_CURVE_PUBLICKEY for clients and servers
- ZMQ_CURVE_SECRETKEY for clients
- ZMQ_CURVE_SERVERKEY for clients
- ZMQ_CURVE_SERVER for servers
- added tools/curve_keygen.c as example
- updated man pages
* ZMQ_PLAIN_SERVER, ZMQ_PLAIN_USERNAME, ZMQ_PLAIN_PASSWORD options
* Man page changes to zmq_setsockopt and zmq_getsockopt
* Man pages for ZMQ_NULL, ZMQ_PLAIN, and ZMQ_CURVE
* Test program test_security
Copyrights had become ads for Sustrik's corporate sponsors, going against the original
agreement to share copyrights with the community (that agreement was: one line stating
iMatix copyright + one reference to AUTHORS file). The proliferation of corporate ads
is also unfair to the many individual authors. I've removed ALL corporate title from
the source files so the copyright statements can now be centralized in AUTHORS and
source files can be properly updated on an annual basis.
- New ZMQ_STATIC flag to enable "libzmq.lib" Windows static library (or "libzmq_d.lib" in Debug mode).
- ZMQ_STATIC needs also to be defined by projects using static linking against "libzmq.lib"
- New StaticDebug & StaticRelease configurations for libzmq Win32 projects under MSVC 2008 & 2010
- Tested with Visual Studio 2008 Express under Windows 7, and Visual Studio 2010 Express under Windows 8.
- when compiling for Windows CE, a C++ project must define the preprocessor definitions: UNDER_CE=$(CEVersion),_WIN32_WCE=$(CEVersion)
- choosing the "_WIN32_CE" form for uniformization with "_WIN32" and "_WIN32_WINNT" already used in libzmq (boost is using both forms)
- see http://msdn.microsoft.com/en-us/library/ee479161(v=winembedded.60).aspx
Until now, zmq_poll always allocates the poll items on the heap.
Now, small item sets, up to ZMQ_POLLITEMS_DFLT, are stack allocated
and only larger sets are allocated on the heap.
- Created a new option ZMQ_ROUTER_RAW_SOCK
- Added new raw_encoder and raw_decoder to receive and send messages in raw form to remote client
- Added test case file tests/test_raw_sock.cpp
o To create a raw router sock set the ZMQ_ROUTER_RAW_SOCK option
o ZMQ_MSGMORE flag is ignored for non-id messages
o To terminate a remote connection send id message followed by zero length data message
avoids warnings of the form:
warning: 'struct iovec' declared inside parameter list
warning: its scope is only this definition or declaration, which is probably not what you want
when building downstream projects
This patch, salvaged from a trainwreck accidental merge earlier, adds a
new sockopt, ZMQ_DELAY_ATTACH_ON_CONNECT which prevents a end point
being available to push messages to until it has fully connected, making
connect work more like bind. This also applies to reconnecting sockets,
which may cause message loss of in-queue messages, so it is sensible to
use this in conjunction with a low HWM and potentially an alternative
acknowledgement path.
Notes on most of the individual commits can be found the repository log.
