Solution: refactor the ZAP thread to avoid creating the socket in the
main thread and using it in the ZAP thread, and also to eliminate
races at shutdown use another inproc control socket to signal
termination to the thread
Solution: ignore ECONNRESET as with EPIPE - it can happen on very
slow machines when the engine sends data to the peer and then tries
to read from the TCP socket before the peer has read
Solution: removed code duplication
improved global variable naming
added assertions on number of ZAP requests handled
added assertion on monitor event to test_curve_security_with_plain_client_credentials
* Problem: no tests for ZAP protocol errors
Solution: added first test for a bogus version number in ZAP reply
* Problem: no tests for ZAP protocol errors
Solution: added more test cases
* Problem: cannot compile without ZMQ_BUILD_DRAFT_API
Solution: conditionally compile parts that depend on draft API
* Problem: test_security_curve times out in CI
Solution: Increase timeout for this test to 20 seconds
* Fixing #2002 one way of doing it
* Mechanisms can implement a new method `error_detail()`
* This error detail have three values for the moment: no_detail
(default), protocol, encryption.
+ generic enough to make sense for all mechanisms.
- low granularity level on information.
* Fixing #2002: implementation of the error details
The ZMQ_EVENT_HANDSHAKE_FAILED event carries the error details
as value.
* Removed Microsoft extenstion for enum member access
This was leading to compilation error under linux.
* Adaptation of CURVE test cases
* Monitoring event: changed API for detailed events
Removed ZMQ_EVENT_HANDSHAKE_FAILED and replaced it by:
- ZMQ_EVENT_HANDSHAKE_FAILED_NO_DETAIL,
- ZMQ_EVENT_HANDSHAKE_FAILED_PROTOCOL,
- ZMQ_EVENT_HANDSHAKE_FAILED_ENCRYPTION
Adaptation of text case `security_curve`
* Removed event value comparison
This was introduced for the previous API model adaptation
* Removed the prints in std output and added missing details
`current_error_detail` was not set in every protocol error cases
* Fixed initialization of current_error_detail
* Fixed error in greeting test case
The handshake failure due to mechanism mismatch in greeting is actually
a protocol error. The error handling method consider it like so and
send a protocol handshake failure monitoring event instead of no_detail.
Fixed the test_security_curve expectation as well.
* Upgraded tests of monitoring events
The tests check the number of monitoring events received
* Problem: does not build under Linux or without ZMQ_DRAFT_API
Solution:
- properly use ZMQ_DRAFT_API conditional compilation
- use receive timeouts instead of Sleep
* Problem: duplicate definition of variable 'timeout'
Solution: merged definitions
* Problem: inconsistent timing dependencies
Solution: reduce timing dependency by using timeouts at more places
* Problem: assertion failure under Linux due to unexpected monitor event
Solution: output event type to aid debugging
* Problem: erroneous assertion code
* Problem: assertion failure with a garbage server key due to an extra third event
Solution: changed assertion to expect three events (needs to be checked)
* Problem: extra include directive to non-existent file
Solution: removed include directive
* Problem: assertion failure on appveyor for unknown reason
Solution: improve debug output
* Problem: no build with libsodium and draft api
Solution: add build configurations with libsodium and draft api
* Problem: assertion failure on CI
Solution: change assertion to reflect actual behaviour on CI (at least temporarily)
* Problem: error in condition in assertion code
* Problem: assertion failure on CI
Solution: generalize assertion to match behavior on CI
* Problem: assertion failures on CI
Solution: removed inconsistent assertion on no monitor events before flushing
improved debuggability by converting function into macro
* Problem: diverging test code for three analogous test cases with garbage key
Solution: extract common code into function
* Problem: does not build without ZMQ_BUILD_DRAFT_API
Solution: introduce dummy variable
* Attempt to remove workaround regarding ZMQ_EVENT_HANDSHAKE_FAILED_NO_DETAIL again
* Problem: EAGAIN error after handshake complete if there is no more data in inbuffer
Solution: Skip tcp_read attempt in that case
* Problem: handshaking event emitted after handshaking failed
Solution: use stream_engine_t::handshaking instead of mechanism_t::status() to determine whether still handshaking
* Include error code in debug output
* Improve debugging output: output flushed events
* Split up ZMQ_EVENT_HANDSHAKE_FAILED_PROTOCOL into ZMQ_EVENT_HANDSHAKE_FAILED_ZMTP and ZMQ_EVENT_HANDSHAKE_FAILED_ZAP
* Fixed compilation without ZMQ_BUILD_DRAFT_API
* Renamed ZMQ_EVENT_HANDSHAKE_SUCCEED to ZMQ_EVENT_HANDSHAKE_SUCCEEDED for language consistency
* Renamed ZMQ_EVENT_HANDSHAKE_SUCCEED to ZMQ_EVENT_HANDSHAKE_SUCCEEDED for language consistency
* Renamed ZMQ_EVENT_HANDSHAKE_SUCCEED to ZMQ_EVENT_HANDSHAKE_SUCCEEDED for language consistency
* Fixed assert_monitor_event (require event instead of allowing no event)
Reverted erroneous change to handshaking condition
Renamed test_wrong_key to test_garbage_key
Generalized assumption in test_garbage_key to allow for ZMQ_EVENT_HANDSHAKE_FAILED_NO_DETAIL with error == EPIPE
* Better isolate test cases from each other by providing a fresh context & server for each
* Added diagnostic output
* Changed assertion to reflect actual behavior on CI
* Fixed formatting, observe maximum line length
* Fixed formatting, observe maximum line length
* Increase timeout to check if this fixes valgrind run
* Close server with close_zero_linger
* Increase timeout to check if this fixes valgrind run
* Increase timeout to check if this fixes valgrind run
* Generalize assertion to also work with valgrind
* Fixed formatting
* Add more diagnostic output
* Generalize assertion to also work with valgrind
Linux now supports Virtual Routing and Forwarding (VRF) as per:
https://www.kernel.org/doc/Documentation/networking/vrf.txt
In order for an application to bind or connect to a socket with an
address in a VRF, they need to first bind the socket to the VRF device:
setsockopt(sd, SOL_SOCKET, SO_BINDTODEVICE, dev, strlen(dev)+1);
Note "dev" is the VRF device, eg. VRF "blue", rather than an interface
enslaved to the VRF.
Add a new socket option, ZMQ_BINDTODEVICE, to bind a socket to a device.
In general, if a socket is bound to a device, eg. an interface, only
packets received from that particular device are processed by the socket.
If device is a VRF device, then subsequent binds/connects to that socket
use addresses in the VRF routing table.
Solution: remove the pipe from the real trie when a peer disconnects.
Also add a unit test that exercises the behaviour by reconnecting
a different socket and sending a message that matches.
Fixes#2601 and introduced by #2042
Solution: use lower case ws2_32.lib to enable cross compilation
from platforms with case-sensitive filesystems.
When cross compiling the tests with Mingw-w64, CMake cannot
locate Ws2_32.lib
Solution: revert change that made ZAP mandatory.
The "Stonehouse" pattern, where CURVE is used only for encryption and
without authentication, is a valid use case so we should still
support it.
Also restore CURVE testing in the test_heartbeat.
Fixes#2594
Solution: roll back the pipe if writing messages other than the
first fails in router::xsend. Roll it back also when the pipe is
terminating.
Also add test case that reproduces the memory leak when ran with
valgrind.
Fixes#2567
Solution: roll back the pipe if writing messages other than the
first fails in router::xsend.
Also add test case that reproduces the memory leak when ran with
valgrind.
Fixes#2567
Solution: use either a wildcard IPC, or where the codepath needs to
be tested a file named after the test, so that it is unique and there
is no clash on the filesystem, allowing parallel test runs.
Solution: use ZMQ_LAST_ENDPOINT in most places. This alllows running
tests in paralle, and on over-booked shared machines where many of
the ports would be already in use.
Keep 3 tests with an hardcoded port, as there are some code paths that
require it (eg: connect before bind), but list those ports in
tests/testutil.hpp as macros so that they do not overlap and still
allow parallel runs.
These changes were inspired by a patch uploaded to Ubuntu by the
package maintainer, Steve Langasek <steve.langasek@ubuntu.com>.
Thank you Steve!
Problem: there is no test coverage for GSSAPI.
Solution: add a test structured like the CURVE test.
The test is not built if libzmq is not configured with
--with-libgssapi_krb5. It will report SKIPPED status
if the required environment is missing (see below).
Environment: KRB5_KTNAME and KRB5_CLIENT_KTNAME
environment variables must point to a keytab file
containing creds for a host-based test principal
(see comment at top of source for details).
Kerberos must be configured and a KDC containing the
test principal must be running, otherwise the test
will fail/hang.
N.B. For now, the test must use the same principal for
both client and server roles because it seems impossible
to set them to different principals when they are
threads in the same process. Once one principal is
cached in credential cache, attempts to acquire creds
for a different "desired name" seem to be ignored and
the cached principal is used instead.
Remove the `build/msvc` include path from the test project to fix a
problem with the order of the include paths. Additionally remove the
unnecessary `include_directories` from the master project.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Solution:
Revert "Problem with ZMQ_ROUTER_MANDATORY option when peer lost"
This partially reverts commit 06740b5d8c1fbf13205c9b6c63ba7e7ef4350a04.
The change in the mentioned commit was fixed to be backward
compatible so test changes are no longer necessary.
Partially revert the commit, leaving only the bug fix and taking out
the test change and the superfluous change in socket_base.
indention
Revert "indention"
This reverts commit a6e7e192ac2d089ac9f7dc0d31d4b1fd10de982e.
indention
indention
Fix Failure in tests
Check both pipe full and pipe close
* Problem: zmq_z85_decode does not validate its input
Solution: added checks for invalid characters and overflows
* Added tests, added further check for range overflow, removed (multiple) calls to strlen
* Problem: gcc fails to build
Solution: added missing include directive
* Added VS2015 test_utils_z85 project
* Fixed indentation and copyright notice
* Resolved garbage from merge
* Revert "Added VS2015 test_utils_z85 project"
This reverts commit c58b3c664c144326e77135aa1184b6f0dee11143.
* Problem: test calls zmq_z85_decode with a NULL dest
Solution: call zmq_z85_decode with a properly sized buffer
* Problem: tests for zmq_z85_* scattered over two files
Solution: merged files
* Removed reference to removed test file from CMakeLists.txt
* Problem: Missing include directive to stdint.h
Solution: Added include directive
* Define __STDC_LIMIT_MACROS before including stdint.h
* Problem: Wrong variable is checked for invalid character marker
Solution: Use correct variable
Solution: wrap the event triggering in the DRAFT ifdef as well as the
defines. This ensures that the event are returned only if the
library was built with DRAFTs enabled.
Also update the test case to expect the new events since it uses
the catch-all mask. Although the sequence of event is different and
this might be considered as an API breakage, using the catch-all
ZMQ_EVENT_ALL mask implies that, well, all events are monitored so
it's normal that new ones will be added.
Users that don't want this kind of behaviour to change can simply
monitor only the event that they care about.
Solution: during a connect with a TCP endpoint if a source address is
passed set the SO_REUSEADDR flag on the socket before the bind system
call.
Add unit test to cover this case for both IPv4 and IPv6.
Solution: check if the connecting inproc socket has been closed
before trying to send the identity.
Otherwise the pipe will be in waiting_for_delimiter state causing
writes to fail and the connect to assert when the context is being
torn down and the pending inproc connects are resolved.
Add test case that covers this behaviour.
Solution: allow for '[' character when doing the basic sanity check
on the TCP endpoint.
Also add unit tests for both IPv4 and IPv6 source;dest format.
only if the library is found at a specific path
Solution: Search for libzmq.lib in ../bin/Win32/Debug/v120/dynamic, don't
know how to automatically search in correct path based on current build
configuration
Solution:
- Add checks for **poller_p_ to ensure that we do not segfault when either it
or the value within it are NULL
- Add tests for the above and increase error state coverage
Solution:
- Add error state coverage for zmq_ctx_term(), zmq_term() and
zmq_ctx_shutdown(); zmq_ctx_destroy() is already covered since it only
calls zmq_ctx_term()
- Add coverage for zmq_term()
The TIPC protocol bindings in ZeroMQ defaults to a lookup domain
of 1.0.0 to prevent 'closest first' search, and instead always
do round robin if several sockets in the network or node have
the same name published. In retrospect, this might have been a
bad idea because it won't work on standalone configurations.
We solve this by allowing an optional domain suffix to be provided
in the address, and 0.0.0 should be used in that case, or if the
TIPC address range in the cluster configuration is defined to some
other value. Domain suffixes are only relevant for connecting
addresses.
Signed-off-by: Erik Hugne <erik.hugne@gmail.com>
Solution:
- Add file for testing ancillary API methods and any misc internal machinery
- Add tests for zmq_version(3) and zmq_strerror(3)
- Add test file into gitignore, Autotools and CMake build files
- Increase test coverage
Note:
MSVC solution files have not been updated.
Solution:
- Add check for the [count] parameter in zmq_sendiov() and zmq_recviov()
- Use and add test for zmq_sendiov() in tests/test_iov.cpp
- Add error state tests for zmq_sendiov() in tests/test_iov.cpp
- Add error state tests for zmq_recviov() in tests/test_iov.cpp
- Cleanup tests/test_iov.cpp for style, consistency and clarity
- Generally improve test coverage for both API methods
Hat-tip:
@somdoron, @bluca
Solution:
- Adjust test_xpub_proxy_unsubscribe_disconnect() to support different
protocol types
- Exclude the IPC tests on Windows and OpenVMS
H/T: @somdoron
