The design for running all Crashpad unit tests on Chromium’s try- and
buildbots involves pulling all tests into a single monolithic
crashpad_tests executable. Many Crashpad tests base the name of their
child executables or modules on the name of the main test executable.
Since the main test executable will have a different name in the
in-Chromium build, knowledge of the test executable name (referred to as
“module” here) needs to be added to the tests themselves.
This introduces TestPaths::BuildArtifact(), which allows the module name
to be specified. For Crashpad’s standalone build, the module name is
verified against the main test executable’s name.
TestPaths::BuildArtifact() can also locate paths in the alternate 32-bit
output directory for 64-bit Windows tests, taking on the responsibility
for what the new (5e9ed4cb9f69) TestPaths::Output32BitDirectory(), now
obsolete, did.
Bug: chromium:779790
Change-Id: I64c4a2190b6319e487c999812a7cfc512a75a700
Reviewed-on: https://chromium-review.googlesource.com/747536
Reviewed-by: Scott Graham <scottmg@chromium.org>
As of
00a0654929,
crashpad_util_test is able to run in Chromium. It uses Chromium’s own
base::TestLauncher rather than gtest’s RUN_ALL_TESTS() for proper
integration with Swarming.
Launching WinMultiprocess test children out of the same test executable
via WinChildProcess is not compatible with Chromium’s parallel, shardy,
Swarmy test launcher. When running these children, the standard gtest
RUN_ALL_TESTS() launcher will now be used, even in Chromium.
Two tests disabled in Chromium are now enabled:
ExceptionHandlerServerTest.MultipleConnections and
ScopedProcessSuspend.ScopedProcessSuspend.
As part of this work, I discovered that disabled tests chosen to run via
--gtest_also_run_disabled_tests did not actually work for
WinMultiprocess-based tests, because gtest’s test launcher would refuse
to run the child side of the test, believing it was disabled. This is
fixed by always supplying --gtest_also_run_disabled_tests to
WinChildProcess children, on the basis that if the parent is managing to
run and it’s disabled, disabled tests must actually be enabled.
Bug: crashpad:205
Change-Id: Ied22f16b9329ee13b6b07fd29de704f6fe2a058e
Reviewed-on: https://chromium-review.googlesource.com/742462
Reviewed-by: Scott Graham <scottmg@chromium.org>
Update mini_chromium to 7d6697ceb5cb5ca02fde3813496f48b9b1d76d0c
47ff9691450e Switch the language standard to C++14
7d6697ceb5cb Remove base/memory/ptr_util.h and base::WrapUnique
base::WrapUnique and std::make_unique are similar, but the latter is
standardized and preferred.
Most of the mechanical changes were made with this sed:
for f in $(git grep -l base::WrapUnique | uniq); do
sed -E \
-e 's%base::WrapUnique\(new ([^(]+)\((.*)\)\);%std::make_unique<\1>(\2);%g' \
-e 's%base::WrapUnique\(new ([^(]+)\);%std::make_unique<\1>();%g' \
-e 's%^#include "base/memory/ptr_util.h"$%#include <memory>%' \
-i '' "${f}"
done
Several uses of base::WrapUnique that did not fit on a single line and
were not matched by this sed were adjusted manually. All #include
changes were audited manually, to at least move <memory> into the
correct section. Where <memory> was already #included by a file (or its
corresponding header), the extra #include was removed. Where <memory>
should have been #included by a header, it was added. Other similar
adjustments to other #includes were also made.
Change-Id: Id4e0baad8b3652646bede4c3f30f41fcabfdbd4f
Reviewed-on: https://chromium-review.googlesource.com/714658
Commit-Queue: Mark Mentovai <mark@chromium.org>
Reviewed-by: Leonard Mosescu <mosescu@chromium.org>
This uses “static” at function scope to avoid making local copies, even
in cases where the compiler can’t see that the local copy is
unnecessary. “constexpr” adds additional safety in that it prevents
global state from being initialized from any runtime dependencies, which
would be undesirable.
At namespace scope, “constexpr” is also used where appropriate.
For the most part, this was a mechanical transformation for things
matching '(^| )const [^=]*\['.
Similar transformations could be applied to non-arrays in some cases,
but there’s limited practical impact in most non-array cases relative to
arrays, there are far more use sites, and much more manual intervention
would be required.
Change-Id: I3513b739ee8b0be026f8285475cddc5f9cc81152
Reviewed-on: https://chromium-review.googlesource.com/583997
Commit-Queue: Mark Mentovai <mark@chromium.org>
Reviewed-by: Leonard Mosescu <mosescu@chromium.org>
gtest used to require (expected, actual) ordering for arguments to
EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify
each side as “expected” or “actual.” Tests in Crashpad adhered to this
traditional ordering. After a gtest change in February 2016, it is now
agnostic with respect to the order of these arguments.
This change mechanically updates all uses of these macros to (actual,
expected) by reversing them. This provides consistency with our use of
the logging CHECK_EQ and DCHECK_EQ macros, and makes for better
readability by ordinary native speakers. The rough (but working!)
conversion tool is
https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py,
and “git cl format” cleaned up its output.
EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made
a judgment that one side or the other needed to provide an “unexpected”
value. Consequently, some code used (unexpected, actual) while other
code used (actual, unexpected). For consistency with the new EXPECT_EQ
and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE,
this change also updates these use sites to (actual, unexpected) where
one side can be called “unexpected” as, for example, std::string::npos
can be. Unfortunately, this portion was a manual conversion.
References:
https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison77d6b17338https://github.com/google/googletest/pull/713
Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3
Reviewed-on: https://chromium-review.googlesource.com/466727
Reviewed-by: Scott Graham <scottmg@chromium.org>
This supports the “double handler” or “double handler with low
probability” models from https://crashpad.chromium.org/bug/143.
For crashpad_handler to be become its own client, it needs access to its
own executable path to pass to CrashpadClient::StartHandler(). This was
formerly available in the test-only test::Paths::Executable(). Bring
that function’s implementation to the non-test Paths::Executable() in
util/misc, and rename test::Paths to test::TestPaths to avoid future
confusion.
test::TestPaths must still be used to access TestDataRoot(), which does
not make any sense to non-test code.
test::TestPaths::Executable() is retained for use by tests, which most
likely prefer the fatal semantics of that function. Paths::Executable()
is not fatal because for the purposes of implementing the double
handler, a failure to locate the executable path (which may happen on
some systems in deeply-nested directory hierarchies) shouldn’t cause the
initial crashpad_handler to abort, even if it does prevent a second
crashpad_handler from being started.
Bug: crashpad:143
Test: crashpad_util_test Paths.*, crashpad_test_test TestPaths.*
Change-Id: I9f75bf61839ce51e33c9f7c0d7031cebead6a156
Reviewed-on: https://chromium-review.googlesource.com/466346
Reviewed-by: Scott Graham <scottmg@chromium.org>
Commit-Queue: Mark Mentovai <mark@chromium.org>
Bug: crashpad:81
Change-Id: I3cb115440638df909d1c0cdfd01c824ac0d0b073
Reviewed-on: https://chromium-review.googlesource.com/458592
Reviewed-by: Mark Mentovai <mark@chromium.org>
Reviewed-by: Scott Graham <scottmg@chromium.org>
Commit-Queue: Sigurður Ásgeirsson <siggi@chromium.org>
ReadFile() attempted to continue reading after a short read. In most
cases, this is fine. However, ReadFile() would keep trying to fill a
partially-filled buffer until experiencing a 0-length read(), signaling
end-of-file. For certain weird file descriptors like terminal input, EOF
is an ephemeral condition, and attempting to read beyond EOF doesn’t
actually return 0 (EOF) provided that they remain open, it will block
waiting for more input. Consequently, ReadFile() and anything based on
ReadFile() had an undocumented and quirky interface, which was that any
short read that it returned (not an underlying short read) actually
indicated EOF.
This facet of ReadFile() was unexpected, so it’s being removed. The new
behavior is that ReadFile() will return an underlying short read. The
behavior of FileReaderInterface::Read() is updated in accordance with
this change.
Upon experiencing a short read, the caller can determine the best
action. Most callers were already prepared for this behavior. Outside of
util/file, only crashpad_database_util properly implemented EOF
detection according to previous semantics, and adapting it to new
semantics is trivial.
Callers who require an exact-length read can use the new
ReadFileExactly(), or the newly renamed LoggingReadFileExactly() or
CheckedReadFileExactly(). These functions will retry following a short
read. The renamed functions were previously called LoggingReadFile() and
CheckedReadFile(), but those names implied that they were simply
wrapping ReadFile(), which is not the case. They wrapped ReadFile() and
further, insisted on a full read. Since ReadFile()’s semantics are now
changing but these functions’ are not, they’re now even more distinct
from ReadFile(), and must be renamed to avoid confusion.
Test: *
Change-Id: I06b77e0d6ad8719bd2eb67dab93a8740542dd908
Reviewed-on: https://chromium-review.googlesource.com/456676
Reviewed-by: Robert Sesek <rsesek@chromium.org>
This makes Doxygen’s output more actionable by setting QUIET = YES to
suppress verbose progress spew, and WARN_IF_UNDOCUMENTED = NO to prevent
warnings for undocumented classes and members from being generated. The
latter is too noisy, producing 721 warnings in the current codebase.
The remaining warnings produced by Doxygen were useful and actionable.
They fell into two categories: abuses of Doxygen’s markup syntax, and
missing (or misspelled) parameter documentation. In a small number of
cases, pass-through parameters had intentionally been left undocumented.
In these cases, they are now given blank \param descriptions. This is
not optimal, but there doesn’t appear to be any other way to tell
Doxygen to allow a single parameter to be undocumented.
Some tricky Doxygen errors were resolved by asking it to not enter
directiores that we do not provide documentation in (such as the
“on-platform” compat directories, compat/mac and compat/win, as well as
compat/non_cxx11_lib) while allowing it to enter the
“off-platform” directories that we do document (compat/non_mac and
compat/non_win).
A Doxygen run (doc/support/generate_doxygen.sh) now produces no output
at all. It would produce warnings if any were triggered.
Not directly related, but still relevant to documentation,
doc/support/generate.sh is updated to remove temporary removals of
now-extinct files and directories. doc/appengine/README is updated so
that a consistent path to “goapp” is used throughout the file.
Change-Id: I300730c04de4d3340551ea3086ca70cc5ff862d1
Reviewed-on: https://chromium-review.googlesource.com/408812
Reviewed-by: Robert Sesek <rsesek@chromium.org>
Previously, StartHandler() launched the handler process, then connected
over a pipe to register for crash handling. Instead, the initial client
can create and inherit handles to the handler and pass those handle
values and other data (addresses, etc.) on the command line.
This should improve startup time as there's no need to synchronize with
the process at startup, and allows avoiding a call to CreateProcess()
directly in StartHandler(), which is important for registration for
crash reporting from DllMain().
Incidentally adds new utility functions for string/number conversion and
string splitting.
Note: API change; UseHandler() is removed for all platforms.
BUG=chromium:567850,chromium:656800
Change-Id: I1602724183cb107f805f109674c53e95841b24fd
Reviewed-on: https://chromium-review.googlesource.com/400015
Reviewed-by: Mark Mentovai <mark@chromium.org>
This was done in Chromium’s local copy of Crashpad in 562827afb599. This
change is similar to that one, except more care was taken to avoid
including headers from a .cc or _test.cc when already included by the
associated .h. Rather than using <stddef.h> for size_t, Crashpad has
always used <sys/types.h>, so that’s used here as well.
This updates mini_chromium to 8a2363f486e3a0dc562a68884832d06d28d38dcc,
which removes base/basictypes.h.
e128dcf10122 Remove base/move.h; use std::move() instead of Pass()
8a2363f486e3 Move basictypes.h to macros.h
R=avi@chromium.org
Review URL: https://codereview.chromium.org/1566713002 .
This more-natural spelling doesn’t require Crashpad developers to have
to remember anything special when writing code in Crashpad. It’s easier
to grep for and it’s easier to remove the “compat” part when pre-C++11
libraries are no longer relevant.
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1513573005 .
This consolidates all of the twisted casts and comments that discuss how
HANDLEs are really only 32 bits wide even in 64-bit processes on 64-bit
operating systems into a single location.
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1422503015 .
A few function implementations that were missing, various switches
for functions/functionality that didn't exist on XP, and far too long
figuring out what exactly was wrong with SYSTEM_PROCESS_INFORMATION
on x86 (the "alignment_for_x86" fields).
R=mark@chromium.org
BUG=crashpad:1, crashpad:50, chromium:531663
Review URL: https://codereview.chromium.org/1336823002 .
Now that we have a multiprocess test harness, add a test for
ProcessReaderWin for reading from a child.
Parent test code wasn't closing handles properly; fix that.
R=rsesek@chromium.org
BUG=crashpad:1
Review URL: https://codereview.chromium.org/1160843006
