The handler will now be less strict about checking CrashpadInfo struct
sizes. Assuming the signature and version fields match:
- If the handler sees a struct smaller than it’s expecting, the module
was likely built with an earlier version of the client library, and
it’s safe to treat the unknown fields as though they were zero or
other suitable default values.
- If the handler sees a struct larger than it’s expecting, the module
was likely built with a later version of the client library. In that
case, actions desired by the client will not be performed, but this
is not otherwise an error condition.
The CrashpadInfo struct must always be at least large enough to contain
at least the size field. The signature and version fields are always
checked.
The section size must be at least as large as the size carried within
the struct. To account for possible section padding, strict equality is
not required.
Bug: chromium:784427
Test: crashpad_snapshot_test CrashpadInfoSizes_ClientOptions/*.*
Change-Id: Ibb0690ca6ed5e7619d1278a68ba7e893d55f19fb
Reviewed-on: https://chromium-review.googlesource.com/767709
Commit-Queue: Mark Mentovai <mark@chromium.org>
Reviewed-by: Robert Sesek <rsesek@chromium.org>
This is essentially based on a search for “^const .*=”.
Change-Id: I9332c1f0cf7c891ba1ae373dc537f700f9a1d956
Reviewed-on: https://chromium-review.googlesource.com/585452
Reviewed-by: Leonard Mosescu <mosescu@chromium.org>
In 10.13, modules loaded from the dyld shared cache appear with __TEXT
segments that have a nonzero “fileoff” (file offset). Previously, the
fileoff was always 0. Previously, the fileoff for segments in the dyld
shared cache was the actual offset into the shared cache (not 0), but
special consideration was given to __TEXT segments which were forced to
0. See 10.12.4 dyld-433.5/interlinked-dylibs/OptimizerLinkedit.cpp
LinkeditOptimizer<>::updateLoadCommands(). Note the comment there where
the __TEXT segment’s apparent fileoff is set to 0:
// HACK until lldb fixed in: <rdar://problem/20357466>
// DynamicLoaderMacOSXDYLD fixes for Monarch dyld shared cache
Refer also to the lldb commit that references the above,
http://llvm.org/viewvc/llvm-project?view=revision&revision=233714.
Evidently, update_dyld_shared_cache has been revised to no longer apply
this hack in 10.13. Crashpad’s sanity check for __TEXT segments having a
fileoff of 0 is no longer valid, and causes it to reject modules loaded
from the dyld shared cache.
Since this was just a sanity check, remove it entirely.
This caused module information for modules loaded from the dyld shared
cache to be missing from minidumps produced on 10.13, which in turn
prevented symbolization in frames belonging to most system libraries.
For reasons not yet understood, I don’t see this problem in Chrome on
10.13db1 17A264c on a test virtual machine (HFS+ filesystem), although I
do see it on actual hardware (APFS filesystem), and I do see it in
Crashpad’s tests and reduced testcases on both as well.
Bug: crashpad:185, crashpad:189
Test: crashpad_snapshot_test MachOImageReader.Self_DyldImages:ProcessReader.SelfModules:ProcessReader.ChildModules:ProcessTypes.DyldImagesSelf
Change-Id: I8b0a22c55c33ce920804a879f6fab67272f3556e
Reviewed-on: https://chromium-review.googlesource.com/535576
Reviewed-by: Robert Sesek <rsesek@chromium.org>
This defines the global (per-module) CrashpadInfo structure properly on
Linux/Android, located via the “crashpad_info” section name.
Per the ELF specification, section names with a leading dot are reserved
for the system. Reading that, I realized that the same is true of Mach-O
sections with leading underscores, so this renames the section as used
on Mach-O from __DATA,__crashpad_info to __DATA,crashpad_info.
This change is sufficient to successfully build crashpad_client as a
static library on Linux/Android, but the library is incomplete. There’s
no platform-specific database implementation, no CaptureContext() or
CRASHPAD_SIMULATE_CRASH() implementation, and most notably, no
CrashpadClient implementation.
BUG=crashpad:30
Change-Id: I29df7b0f8ee1c79bf8a19502812f59d4b1577b85
Reviewed-on: https://chromium-review.googlesource.com/406427
Reviewed-by: Robert Sesek <rsesek@chromium.org>
This was done in Chromium’s local copy of Crashpad in 562827afb599. This
change is similar to that one, except more care was taken to avoid
including headers from a .cc or _test.cc when already included by the
associated .h. Rather than using <stddef.h> for size_t, Crashpad has
always used <sys/types.h>, so that’s used here as well.
This updates mini_chromium to 8a2363f486e3a0dc562a68884832d06d28d38dcc,
which removes base/basictypes.h.
e128dcf10122 Remove base/move.h; use std::move() instead of Pass()
8a2363f486e3 Move basictypes.h to macros.h
R=avi@chromium.org
Review URL: https://codereview.chromium.org/1566713002 .
Add MapInsertOrReplace<>() to insert a key-value pair into a map if the
key is not already present, or replace the existing value for key if the
key is present. The original value can optionally be returned to the
caller in this case.
Map insertions now use either MapInsertOrReplace<>() or
std::map<>::insert() directly.
Use MapInsertOrReplace<>() when the map should be updated to contain a
mapping from a key to a value regardless of whether the key is already
present.
Use std::map<>::insert() to insert a mapping from a key to a value
without replacing any existing mapping from a key, if present. If it is
important to know whether an existing mapping from a key was present,
use the returned std::pair<>.second. If it is important to know the
existing value, use the returned std::pair<>.first->second.
This change has a slight positive impact on performance.
TEST=crashpad_util_test MapInsert.MapInsertOrReplace and others
BUG=
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1044273002
disabled.
ClientInfo::set_system_crash_reporter_forwarding() can be used to
disable forwarding. The first module that is found with a non-default
value in this field will dictate whether forwarding is enabled or
disabled. It is possible to enable or disable reporting with this call,
as well as reset it to default, which will allow later modules a chance
to influence the behavior.
ClientInfo::set_crashpad_handler_behavior() is also provided, which can
be used to disable Crashpad’s handling of the exception. Most users
should not call this, but should use Settings::SetUploadsEnabled()
instead.
TEST=crashpad_snapshot_test \
CrashpadInfoClientOptions.*:MachOImageReader.Self_DyldImages; \
run_with_crashpad --handler crashpad_handler \
-a --database=/tmp/crashpad_db \
-a --url=https://clients2.google.com/cr/staging_report \
-a --annotation=prod=crashpad \
-a --annotation=ver=0.7.0 \
crashy_program
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/997713002
implicit_cast<> only performs a cast in cases where an implicit
conversion would be possible. It’s even safer than static_cast<> It’s an
“explicit implicit” cast, which is not normally necsesary, but is
frequently required when working with the ?: operator, functions like
std::min() and std::max(), and logging and testing macros.
The public style guide does not mention implicit_cast<> only because it
is not part of the standard library, but would otherwise require it in
these situations. Since base does provide implicit_cast<>, it should be
used whenever possible.
The only uses of static_cast<> not converted to implicit_cast<> are
those that require static_cast<>, such as those that assign an integer
constant to a variable of an enum type.
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/700383007
