As of
00a0654929,
crashpad_util_test is able to run in Chromium. It uses Chromium’s own
base::TestLauncher rather than gtest’s RUN_ALL_TESTS() for proper
integration with Swarming.
Launching WinMultiprocess test children out of the same test executable
via WinChildProcess is not compatible with Chromium’s parallel, shardy,
Swarmy test launcher. When running these children, the standard gtest
RUN_ALL_TESTS() launcher will now be used, even in Chromium.
Two tests disabled in Chromium are now enabled:
ExceptionHandlerServerTest.MultipleConnections and
ScopedProcessSuspend.ScopedProcessSuspend.
As part of this work, I discovered that disabled tests chosen to run via
--gtest_also_run_disabled_tests did not actually work for
WinMultiprocess-based tests, because gtest’s test launcher would refuse
to run the child side of the test, believing it was disabled. This is
fixed by always supplying --gtest_also_run_disabled_tests to
WinChildProcess children, on the basis that if the parent is managing to
run and it’s disabled, disabled tests must actually be enabled.
Bug: crashpad:205
Change-Id: Ied22f16b9329ee13b6b07fd29de704f6fe2a058e
Reviewed-on: https://chromium-review.googlesource.com/742462
Reviewed-by: Scott Graham <scottmg@chromium.org>
Rather than having the 64-bit build assume that it lives in
out\{Debug,Release}_x64 and that it can find 32-bit build output in
out\{Debug,Release}, require the location of 32-bit build output to be
provided explicitly via the CRASHPAD_TEST_32_BIT_OUTPUT environment
variable. If this variable is not set, 64-bit tests that require 32-bit
test build output will dynamically disable themselves at runtime.
In order for this to work, a new DISABLED_TEST() macro is added to
support dynamically disabled tests. gtest does not have its own
first-class support for this
(https://groups.google.com/d/topic/googletestframework/Nwh3u7YFuN4,
https://github.com/google/googletest/issues/490) so this local solution
is used instead.
For tests via Crashpad’s own build\run_tests.py, which is how Crashpad’s
own buildbots and trybots invoke tests, CRASHPAD_TEST_32_BIT_OUTPUT is
set to a locaton compatible with the paths expected for the GYP-based
build. No test coverage is lost on Crashpad’s own buildbots and trybots.
For Crashpad tests in Chromium’s buildbots and trybots, this environment
variable will not be set, causing these tests to be dynamically
disabled.
Bug: crashpad:203, chromium:743139, chromium:777924
Change-Id: I3c0de2bf4f835e13ed5a4adda5760d6fed508126
Reviewed-on: https://chromium-review.googlesource.com/739795
Commit-Queue: Mark Mentovai <mark@chromium.org>
Reviewed-by: Scott Graham <scottmg@chromium.org>
filename_rules.gypi doesn’t treat Android as Linux, so Crashpad’s .gyp
files are peppered throughout with this custom filename rule. This broke
in 59c5d848e5c5 when FakePtraceConnection was introduced.
Bug: crashpad:30
Change-Id: I524d32887d243541634d9a0803c7f46afd6d45e6
Reviewed-on: https://chromium-review.googlesource.com/700425
Reviewed-by: Joshua Peraza <jperaza@chromium.org>
Commit-Queue: Mark Mentovai <mark@chromium.org>
1) Add PtraceConnection which serves as the base class for specific
types of connections Crashpad uses to trace processes.
2) Add DirectPtraceConnection which is used when the handler process
has `ptrace` capabilities for the target process.
3) Move `ptrace` logic into Ptracer. This class isolates `ptrace` call
logic for use by various PtraceConnection implementations.
Bug: crashpad:30
Change-Id: I98083134a9f7d9f085e4cc816d2b85ffd6d73162
Reviewed-on: https://chromium-review.googlesource.com/671659
Commit-Queue: Joshua Peraza <jperaza@chromium.org>
Reviewed-by: Mark Mentovai <mark@chromium.org>
Reviewed-by: Leonard Mosescu <mosescu@chromium.org>
_dyld_get_all_image_infos() was only used in test code in Crashpad.
This addresses two related problems.
When running on 10.13 or later, _dyld_get_all_image_infos() is not
available. It appears to still be implemented in dyld, but its symbol is
now private. This was always known to be an “internal” interface. When
it’s not available, fall back to obtaining the address of the process’
dyld_all_image_infos structure by calling task_info(…, TASK_DYLD_INFO,
…). Note that this is the same thing that the code being tested does,
although the tests are not rendered entirely pointless because the code
being tested consumes dyld_all_image_infos through its own
implementation of an out-of-process reader interface, while the
dyld_all_image_infos data obtained by _dyld_get_all_image_infos() is
handled strictly in-process by ordinary memory reads. This is covered by
bug 187.
When building with the 10.13 SDK, no _dyld_get_all_image_infos symbol is
available to link against. In this case, access the symbol strictly at
runtime via dlopen() if it may be available, or when expecting to only
run on 10.13 and later, don’t even bother looking for this symbol. This
is covered by part of bug 188.
Bug: crashpad:185, crashpad:187, crashpad:188
Change-Id: Ib283e070faf5d1ec35deee420213b53ec24fb1d3
Reviewed-on: https://chromium-review.googlesource.com/534633
Reviewed-by: Robert Sesek <rsesek@chromium.org>
This supports the “double handler” or “double handler with low
probability” models from https://crashpad.chromium.org/bug/143.
For crashpad_handler to be become its own client, it needs access to its
own executable path to pass to CrashpadClient::StartHandler(). This was
formerly available in the test-only test::Paths::Executable(). Bring
that function’s implementation to the non-test Paths::Executable() in
util/misc, and rename test::Paths to test::TestPaths to avoid future
confusion.
test::TestPaths must still be used to access TestDataRoot(), which does
not make any sense to non-test code.
test::TestPaths::Executable() is retained for use by tests, which most
likely prefer the fatal semantics of that function. Paths::Executable()
is not fatal because for the purposes of implementing the double
handler, a failure to locate the executable path (which may happen on
some systems in deeply-nested directory hierarchies) shouldn’t cause the
initial crashpad_handler to abort, even if it does prevent a second
crashpad_handler from being started.
Bug: crashpad:143
Test: crashpad_util_test Paths.*, crashpad_test_test TestPaths.*
Change-Id: I9f75bf61839ce51e33c9f7c0d7031cebead6a156
Reviewed-on: https://chromium-review.googlesource.com/466346
Reviewed-by: Scott Graham <scottmg@chromium.org>
Commit-Queue: Mark Mentovai <mark@chromium.org>
Previously on macOS, the test used an OS-specific library function to
recover the original argc and argv. On Linux/Android, it essentially
reimplemented the very code it was testing, which didn’t make for a very
good test. The new approach is to save argc and argv in main() and base
the comparison on that.
Bug: crashpad:30
Test: crashpad_util_test ProcessInfo.*, crashpad_test_test MainArguments.*
Change-Id: I578abed3b04ae10a22f79a193bbb8b6589276c97
Reviewed-on: https://chromium-review.googlesource.com/456798
Commit-Queue: Mark Mentovai <mark@chromium.org>
Reviewed-by: Joshua Peraza <jperaza@chromium.org>
As I was finishing d98a4de718d9, it became evident that fsave
proliferation was becoming a problem. Especially considering tests,
there was much duplicated conversion code. This ties everything up
together in a central location.
test::BytesToHexString() is a new function to ease testing of byte
arrays like x87 registers, without having to loop over each byte.
Some static_asserts are added to verify that complex structures that
need to maintain interoperability don’t grow or shrink. This is used
to check the size of the fxsave and fsave structures, as well as the
MinidumpCPUContext* structures.
BUG=crashpad:162
Change-Id: I1a1be18096ee9be250cbfb2e006adfd08eba8753
Reviewed-on: https://chromium-review.googlesource.com/444004
Reviewed-by: Scott Graham <scottmg@chromium.org>
- Linux (but not Android) provides __fpurge() instead of fpurge().
- In multiprocess_exec_test_child, use getrlimit(RLIMIT_NOFILE) instead
of max(sysconf(_SC_OPEN_MAX), OPEN_MAX, getdtablesize()). OPEN_MAX is
not availble on Linux (but is in Android as a bogus value), and
getdtablesize() is not available in Android since 5.0.0 (API 21).
sysconf(_SC_OPEN_MAX) and getdtablesize() both return
getrlimit(RLIMIT_NOFILE) on all relevant platforms.
- Add a Linux/Android implementation of test::Paths::Executable().
- Respect TMPDIR for all POSIX platforms in
ScopedTempDir::CreateTemporaryDirectory(). If TMPDIR is unset or
empty, use /tmp, except on Android, where /tmp does not exist and
/data/local/tmp is used instead.
Also:
- Fix the Mac and Windows implementations of test::Paths::Executable()
to abort on fatal error, in line with the new Linux/Android version.
BUG=crashpad:30
TEST=crashpad_test_test
Change-Id: I98a50d8579b193c813ba79794be087649e94cc06
Reviewed-on: https://chromium-review.googlesource.com/405507
Reviewed-by: Robert Sesek <rsesek@chromium.org>
After 9e79ea1da719, it no longer makes sense for crashpad_util_test_lib
to “hide” in util/util_test.gyp. All of util/test is moved to its own
top-level directory, test, which all other test code is allowed to
depend on. test, too, is allowed to depend on all other non-test code.
In a future change, when crashpad_util_test_lib gains a dependency on
crashpad_client, it won’t look so weird for something in util (even
though it’s in util/test) to depend on something in client, because the
thing that needs to depend on client will live in test, not util.
BUG=crashpad:33
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1051533002
