ProcessSnapshotFuchsia is just a stub, so running fails immediately.
Bug: crashpad:196
Change-Id: Ie281cc13c4ff4a6e9699e882dbd6207daaab346d
Reviewed-on: https://chromium-review.googlesource.com/809234
Reviewed-by: Mark Mentovai <mark@chromium.org>
Commit-Queue: Scott Graham <scottmg@chromium.org>
The handler will now be less strict about checking CrashpadInfo struct
sizes. Assuming the signature and version fields match:
- If the handler sees a struct smaller than it’s expecting, the module
was likely built with an earlier version of the client library, and
it’s safe to treat the unknown fields as though they were zero or
other suitable default values.
- If the handler sees a struct larger than it’s expecting, the module
was likely built with a later version of the client library. In that
case, actions desired by the client will not be performed, but this
is not otherwise an error condition.
The CrashpadInfo struct must always be at least large enough to contain
at least the size field. The signature and version fields are always
checked.
The section size must be at least as large as the size carried within
the struct. To account for possible section padding, strict equality is
not required.
Bug: chromium:784427
Test: crashpad_snapshot_test CrashpadInfoSizes_ClientOptions/*.*
Change-Id: Ibb0690ca6ed5e7619d1278a68ba7e893d55f19fb
Reviewed-on: https://chromium-review.googlesource.com/767709
Commit-Queue: Mark Mentovai <mark@chromium.org>
Reviewed-by: Robert Sesek <rsesek@chromium.org>
The design for running all Crashpad unit tests on Chromium’s try- and
buildbots involves pulling all tests into a single monolithic
crashpad_tests executable. Many Crashpad tests base the name of their
child executables or modules on the name of the main test executable.
Since the main test executable will have a different name in the
in-Chromium build, knowledge of the test executable name (referred to as
“module” here) needs to be added to the tests themselves.
This introduces TestPaths::BuildArtifact(), which allows the module name
to be specified. For Crashpad’s standalone build, the module name is
verified against the main test executable’s name.
TestPaths::BuildArtifact() can also locate paths in the alternate 32-bit
output directory for 64-bit Windows tests, taking on the responsibility
for what the new (5e9ed4cb9f69) TestPaths::Output32BitDirectory(), now
obsolete, did.
Bug: chromium:779790
Change-Id: I64c4a2190b6319e487c999812a7cfc512a75a700
Reviewed-on: https://chromium-review.googlesource.com/747536
Reviewed-by: Scott Graham <scottmg@chromium.org>
_dyld_get_all_image_infos() was only used in test code in Crashpad.
This addresses two related problems.
When running on 10.13 or later, _dyld_get_all_image_infos() is not
available. It appears to still be implemented in dyld, but its symbol is
now private. This was always known to be an “internal” interface. When
it’s not available, fall back to obtaining the address of the process’
dyld_all_image_infos structure by calling task_info(…, TASK_DYLD_INFO,
…). Note that this is the same thing that the code being tested does,
although the tests are not rendered entirely pointless because the code
being tested consumes dyld_all_image_infos through its own
implementation of an out-of-process reader interface, while the
dyld_all_image_infos data obtained by _dyld_get_all_image_infos() is
handled strictly in-process by ordinary memory reads. This is covered by
bug 187.
When building with the 10.13 SDK, no _dyld_get_all_image_infos symbol is
available to link against. In this case, access the symbol strictly at
runtime via dlopen() if it may be available, or when expecting to only
run on 10.13 and later, don’t even bother looking for this symbol. This
is covered by part of bug 188.
Bug: crashpad:185, crashpad:187, crashpad:188
Change-Id: Ib283e070faf5d1ec35deee420213b53ec24fb1d3
Reviewed-on: https://chromium-review.googlesource.com/534633
Reviewed-by: Robert Sesek <rsesek@chromium.org>
gtest used to require (expected, actual) ordering for arguments to
EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify
each side as “expected” or “actual.” Tests in Crashpad adhered to this
traditional ordering. After a gtest change in February 2016, it is now
agnostic with respect to the order of these arguments.
This change mechanically updates all uses of these macros to (actual,
expected) by reversing them. This provides consistency with our use of
the logging CHECK_EQ and DCHECK_EQ macros, and makes for better
readability by ordinary native speakers. The rough (but working!)
conversion tool is
https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py,
and “git cl format” cleaned up its output.
EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made
a judgment that one side or the other needed to provide an “unexpected”
value. Consequently, some code used (unexpected, actual) while other
code used (actual, unexpected). For consistency with the new EXPECT_EQ
and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE,
this change also updates these use sites to (actual, unexpected) where
one side can be called “unexpected” as, for example, std::string::npos
can be. Unfortunately, this portion was a manual conversion.
References:
https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison77d6b17338https://github.com/google/googletest/pull/713
Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3
Reviewed-on: https://chromium-review.googlesource.com/466727
Reviewed-by: Scott Graham <scottmg@chromium.org>
This supports the “double handler” or “double handler with low
probability” models from https://crashpad.chromium.org/bug/143.
For crashpad_handler to be become its own client, it needs access to its
own executable path to pass to CrashpadClient::StartHandler(). This was
formerly available in the test-only test::Paths::Executable(). Bring
that function’s implementation to the non-test Paths::Executable() in
util/misc, and rename test::Paths to test::TestPaths to avoid future
confusion.
test::TestPaths must still be used to access TestDataRoot(), which does
not make any sense to non-test code.
test::TestPaths::Executable() is retained for use by tests, which most
likely prefer the fatal semantics of that function. Paths::Executable()
is not fatal because for the purposes of implementing the double
handler, a failure to locate the executable path (which may happen on
some systems in deeply-nested directory hierarchies) shouldn’t cause the
initial crashpad_handler to abort, even if it does prevent a second
crashpad_handler from being started.
Bug: crashpad:143
Test: crashpad_util_test Paths.*, crashpad_test_test TestPaths.*
Change-Id: I9f75bf61839ce51e33c9f7c0d7031cebead6a156
Reviewed-on: https://chromium-review.googlesource.com/466346
Reviewed-by: Scott Graham <scottmg@chromium.org>
Commit-Queue: Mark Mentovai <mark@chromium.org>
Because DumpAndCrashTargetProcess() suspends the process, the thread
suspend count is one too high for all threads other than the injection
one in the thread snapshots. Compensate for this when we detect this
type of exception.
BUG=crashpad:103
Change-Id: Ib77112fddf5324fc0e43f598604e56f77d67ff54
Reviewed-on: https://chromium-review.googlesource.com/340372
Reviewed-by: Mark Mentovai <mark@chromium.org>
Add a user-configurable cap on the amount of memory that is gathered by
dereferencing thread stacks. (SyzyAsan stores a tremendously large
number of pointers on the stack, so the dumps were ending up in the ~25M
range.)
Also reduce the range around pointers somewhat.
Change-Id: I6bce57d86bd2f6a796e1580c530909e089ec00ed
Reviewed-on: https://chromium-review.googlesource.com/338463
Reviewed-by: Mark Mentovai <mark@chromium.org>
This was done in Chromium’s local copy of Crashpad in 562827afb599. This
change is similar to that one, except more care was taken to avoid
including headers from a .cc or _test.cc when already included by the
associated .h. Rather than using <stddef.h> for size_t, Crashpad has
always used <sys/types.h>, so that’s used here as well.
This updates mini_chromium to 8a2363f486e3a0dc562a68884832d06d28d38dcc,
which removes base/basictypes.h.
e128dcf10122 Remove base/move.h; use std::move() instead of Pass()
8a2363f486e3 Move basictypes.h to macros.h
R=avi@chromium.org
Review URL: https://codereview.chromium.org/1566713002 .
Capture the memory for the loader lock (can be inspected by !cs), as
well as all locks that were created with .DebugInfo which can be viewed
with !locks.
e.g.
0:000> !cs ntdll!LdrpLoaderLock
-----------------------------------------
Critical section = 0x778d6410 (ntdll!LdrpLoaderLock+0x0)
DebugInfo = 0x778d6b6c
NOT LOCKED
LockSemaphore = 0x0
SpinCount = 0x04000000
0:000> !locks -v
CritSec ntdll!RtlpProcessHeapsListLock+0 at 778d7620
LockCount NOT LOCKED
RecursionCount 0
OwningThread 0
EntryCount 0
ContentionCount 0
CritSec +7a0248 at 007a0248
LockCount NOT LOCKED
RecursionCount 0
OwningThread 0
EntryCount 0
ContentionCount 0
CritSec crashy_program!g_critical_section_with_debug_info+0 at 01342c48
LockCount NOT LOCKED
RecursionCount 0
OwningThread 0
EntryCount 0
ContentionCount 0
CritSec crashy_program!crashpad::`anonymous namespace'::g_test_critical_section+0 at 01342be0
WaiterWoken No
LockCount 0
RecursionCount 1
OwningThread 34b8
EntryCount 0
ContentionCount 0
*** Locked
Scanned 4 critical sections
R=mark@chromium.org
BUG=crashpad:52
Review URL: https://codereview.chromium.org/1392093003 .
At the moment the LOGs print something unhelpful like:
[19912:21888:20150501,145958.098:ERROR file_io_win.cc:122] CreateFile 000000C9F8FDE7F0: The system cannot find the file specified. (0x2)
(where the hex string ought to be a file name)
R=mark@chromium.org
BUG=crashpad:1
Review URL: https://codereview.chromium.org/1117393002
The main goal was to get the beginnings of module iteration and retrieval
of CrashpadInfo in snapshot. The main change for that is to move
crashpad_info_client_options[_test] down out of mac/.
This also requires adding some of the supporting code of snapshot in
ProcessReaderWin, ProcessSnapshotWin, and ModuleSnapshotWin. These are
partially copied from Mac or stubbed out with lots of TODO annotations.
This is a bit unfortunate, but seemed like the most productive way to
make progress incrementally. That is, it's mostly placeholder at the
moment, but hopefully has the right shape for things to come.
R=mark@chromium.org
BUG=crashpad:1
Review URL: https://codereview.chromium.org/1052813002
