_dyld_get_all_image_infos() was only used in test code in Crashpad.
This addresses two related problems.
When running on 10.13 or later, _dyld_get_all_image_infos() is not
available. It appears to still be implemented in dyld, but its symbol is
now private. This was always known to be an “internal” interface. When
it’s not available, fall back to obtaining the address of the process’
dyld_all_image_infos structure by calling task_info(…, TASK_DYLD_INFO,
…). Note that this is the same thing that the code being tested does,
although the tests are not rendered entirely pointless because the code
being tested consumes dyld_all_image_infos through its own
implementation of an out-of-process reader interface, while the
dyld_all_image_infos data obtained by _dyld_get_all_image_infos() is
handled strictly in-process by ordinary memory reads. This is covered by
bug 187.
When building with the 10.13 SDK, no _dyld_get_all_image_infos symbol is
available to link against. In this case, access the symbol strictly at
runtime via dlopen() if it may be available, or when expecting to only
run on 10.13 and later, don’t even bother looking for this symbol. This
is covered by part of bug 188.
Bug: crashpad:185, crashpad:187, crashpad:188
Change-Id: Ib283e070faf5d1ec35deee420213b53ec24fb1d3
Reviewed-on: https://chromium-review.googlesource.com/534633
Reviewed-by: Robert Sesek <rsesek@chromium.org>
gtest used to require (expected, actual) ordering for arguments to
EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify
each side as “expected” or “actual.” Tests in Crashpad adhered to this
traditional ordering. After a gtest change in February 2016, it is now
agnostic with respect to the order of these arguments.
This change mechanically updates all uses of these macros to (actual,
expected) by reversing them. This provides consistency with our use of
the logging CHECK_EQ and DCHECK_EQ macros, and makes for better
readability by ordinary native speakers. The rough (but working!)
conversion tool is
https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py,
and “git cl format” cleaned up its output.
EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made
a judgment that one side or the other needed to provide an “unexpected”
value. Consequently, some code used (unexpected, actual) while other
code used (actual, unexpected). For consistency with the new EXPECT_EQ
and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE,
this change also updates these use sites to (actual, unexpected) where
one side can be called “unexpected” as, for example, std::string::npos
can be. Unfortunately, this portion was a manual conversion.
References:
https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison77d6b17338https://github.com/google/googletest/pull/713
Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3
Reviewed-on: https://chromium-review.googlesource.com/466727
Reviewed-by: Scott Graham <scottmg@chromium.org>
This supports the “double handler” or “double handler with low
probability” models from https://crashpad.chromium.org/bug/143.
For crashpad_handler to be become its own client, it needs access to its
own executable path to pass to CrashpadClient::StartHandler(). This was
formerly available in the test-only test::Paths::Executable(). Bring
that function’s implementation to the non-test Paths::Executable() in
util/misc, and rename test::Paths to test::TestPaths to avoid future
confusion.
test::TestPaths must still be used to access TestDataRoot(), which does
not make any sense to non-test code.
test::TestPaths::Executable() is retained for use by tests, which most
likely prefer the fatal semantics of that function. Paths::Executable()
is not fatal because for the purposes of implementing the double
handler, a failure to locate the executable path (which may happen on
some systems in deeply-nested directory hierarchies) shouldn’t cause the
initial crashpad_handler to abort, even if it does prevent a second
crashpad_handler from being started.
Bug: crashpad:143
Test: crashpad_util_test Paths.*, crashpad_test_test TestPaths.*
Change-Id: I9f75bf61839ce51e33c9f7c0d7031cebead6a156
Reviewed-on: https://chromium-review.googlesource.com/466346
Reviewed-by: Scott Graham <scottmg@chromium.org>
Commit-Queue: Mark Mentovai <mark@chromium.org>
Bug: crashpad:81
Change-Id: I3cb115440638df909d1c0cdfd01c824ac0d0b073
Reviewed-on: https://chromium-review.googlesource.com/458592
Reviewed-by: Mark Mentovai <mark@chromium.org>
Reviewed-by: Scott Graham <scottmg@chromium.org>
Commit-Queue: Sigurður Ásgeirsson <siggi@chromium.org>
Previously on macOS, the test used an OS-specific library function to
recover the original argc and argv. On Linux/Android, it essentially
reimplemented the very code it was testing, which didn’t make for a very
good test. The new approach is to save argc and argv in main() and base
the comparison on that.
Bug: crashpad:30
Test: crashpad_util_test ProcessInfo.*, crashpad_test_test MainArguments.*
Change-Id: I578abed3b04ae10a22f79a193bbb8b6589276c97
Reviewed-on: https://chromium-review.googlesource.com/456798
Commit-Queue: Mark Mentovai <mark@chromium.org>
Reviewed-by: Joshua Peraza <jperaza@chromium.org>
ReadFile() attempted to continue reading after a short read. In most
cases, this is fine. However, ReadFile() would keep trying to fill a
partially-filled buffer until experiencing a 0-length read(), signaling
end-of-file. For certain weird file descriptors like terminal input, EOF
is an ephemeral condition, and attempting to read beyond EOF doesn’t
actually return 0 (EOF) provided that they remain open, it will block
waiting for more input. Consequently, ReadFile() and anything based on
ReadFile() had an undocumented and quirky interface, which was that any
short read that it returned (not an underlying short read) actually
indicated EOF.
This facet of ReadFile() was unexpected, so it’s being removed. The new
behavior is that ReadFile() will return an underlying short read. The
behavior of FileReaderInterface::Read() is updated in accordance with
this change.
Upon experiencing a short read, the caller can determine the best
action. Most callers were already prepared for this behavior. Outside of
util/file, only crashpad_database_util properly implemented EOF
detection according to previous semantics, and adapting it to new
semantics is trivial.
Callers who require an exact-length read can use the new
ReadFileExactly(), or the newly renamed LoggingReadFileExactly() or
CheckedReadFileExactly(). These functions will retry following a short
read. The renamed functions were previously called LoggingReadFile() and
CheckedReadFile(), but those names implied that they were simply
wrapping ReadFile(), which is not the case. They wrapped ReadFile() and
further, insisted on a full read. Since ReadFile()’s semantics are now
changing but these functions’ are not, they’re now even more distinct
from ReadFile(), and must be renamed to avoid confusion.
Test: *
Change-Id: I06b77e0d6ad8719bd2eb67dab93a8740542dd908
Reviewed-on: https://chromium-review.googlesource.com/456676
Reviewed-by: Robert Sesek <rsesek@chromium.org>
As I was finishing d98a4de718d9, it became evident that fsave
proliferation was becoming a problem. Especially considering tests,
there was much duplicated conversion code. This ties everything up
together in a central location.
test::BytesToHexString() is a new function to ease testing of byte
arrays like x87 registers, without having to loop over each byte.
Some static_asserts are added to verify that complex structures that
need to maintain interoperability don’t grow or shrink. This is used
to check the size of the fxsave and fsave structures, as well as the
MinidumpCPUContext* structures.
BUG=crashpad:162
Change-Id: I1a1be18096ee9be250cbfb2e006adfd08eba8753
Reviewed-on: https://chromium-review.googlesource.com/444004
Reviewed-by: Scott Graham <scottmg@chromium.org>
This makes Doxygen’s output more actionable by setting QUIET = YES to
suppress verbose progress spew, and WARN_IF_UNDOCUMENTED = NO to prevent
warnings for undocumented classes and members from being generated. The
latter is too noisy, producing 721 warnings in the current codebase.
The remaining warnings produced by Doxygen were useful and actionable.
They fell into two categories: abuses of Doxygen’s markup syntax, and
missing (or misspelled) parameter documentation. In a small number of
cases, pass-through parameters had intentionally been left undocumented.
In these cases, they are now given blank \param descriptions. This is
not optimal, but there doesn’t appear to be any other way to tell
Doxygen to allow a single parameter to be undocumented.
Some tricky Doxygen errors were resolved by asking it to not enter
directiores that we do not provide documentation in (such as the
“on-platform” compat directories, compat/mac and compat/win, as well as
compat/non_cxx11_lib) while allowing it to enter the
“off-platform” directories that we do document (compat/non_mac and
compat/non_win).
A Doxygen run (doc/support/generate_doxygen.sh) now produces no output
at all. It would produce warnings if any were triggered.
Not directly related, but still relevant to documentation,
doc/support/generate.sh is updated to remove temporary removals of
now-extinct files and directories. doc/appengine/README is updated so
that a consistent path to “goapp” is used throughout the file.
Change-Id: I300730c04de4d3340551ea3086ca70cc5ff862d1
Reviewed-on: https://chromium-review.googlesource.com/408812
Reviewed-by: Robert Sesek <rsesek@chromium.org>
- Linux (but not Android) provides __fpurge() instead of fpurge().
- In multiprocess_exec_test_child, use getrlimit(RLIMIT_NOFILE) instead
of max(sysconf(_SC_OPEN_MAX), OPEN_MAX, getdtablesize()). OPEN_MAX is
not availble on Linux (but is in Android as a bogus value), and
getdtablesize() is not available in Android since 5.0.0 (API 21).
sysconf(_SC_OPEN_MAX) and getdtablesize() both return
getrlimit(RLIMIT_NOFILE) on all relevant platforms.
- Add a Linux/Android implementation of test::Paths::Executable().
- Respect TMPDIR for all POSIX platforms in
ScopedTempDir::CreateTemporaryDirectory(). If TMPDIR is unset or
empty, use /tmp, except on Android, where /tmp does not exist and
/data/local/tmp is used instead.
Also:
- Fix the Mac and Windows implementations of test::Paths::Executable()
to abort on fatal error, in line with the new Linux/Android version.
BUG=crashpad:30
TEST=crashpad_test_test
Change-Id: I98a50d8579b193c813ba79794be087649e94cc06
Reviewed-on: https://chromium-review.googlesource.com/405507
Reviewed-by: Robert Sesek <rsesek@chromium.org>
Previously, StartHandler() launched the handler process, then connected
over a pipe to register for crash handling. Instead, the initial client
can create and inherit handles to the handler and pass those handle
values and other data (addresses, etc.) on the command line.
This should improve startup time as there's no need to synchronize with
the process at startup, and allows avoiding a call to CreateProcess()
directly in StartHandler(), which is important for registration for
crash reporting from DllMain().
Incidentally adds new utility functions for string/number conversion and
string splitting.
Note: API change; UseHandler() is removed for all platforms.
BUG=chromium:567850,chromium:656800
Change-Id: I1602724183cb107f805f109674c53e95841b24fd
Reviewed-on: https://chromium-review.googlesource.com/400015
Reviewed-by: Mark Mentovai <mark@chromium.org>
When reason is mistaken for reason_, things can get unreasonable.
Change-Id: I3deff343fd6836eba3111ba7551174591c2bf5bc
Reviewed-on: https://chromium-review.googlesource.com/354101
Reviewed-by: Robert Sesek <rsesek@chromium.org>
_NSGetExecutablePath() returns a buffer size including space for the
trailing NUL byte. A std::string’s length should be one less than this,
because the std::string’s length does not include the trailing NUL byte
that is guaranteed to be present.
Change-Id: I46b8a68979beda7dc5de09d0eef6f1d3d6a78ecf
Reviewed-on: https://chromium-review.googlesource.com/354100
Reviewed-by: Robert Sesek <rsesek@chromium.org>
This was done in Chromium’s local copy of Crashpad in 562827afb599. This
change is similar to that one, except more care was taken to avoid
including headers from a .cc or _test.cc when already included by the
associated .h. Rather than using <stddef.h> for size_t, Crashpad has
always used <sys/types.h>, so that’s used here as well.
This updates mini_chromium to 8a2363f486e3a0dc562a68884832d06d28d38dcc,
which removes base/basictypes.h.
e128dcf10122 Remove base/move.h; use std::move() instead of Pass()
8a2363f486e3 Move basictypes.h to macros.h
R=avi@chromium.org
Review URL: https://codereview.chromium.org/1566713002 .
This more-natural spelling doesn’t require Crashpad developers to have
to remember anything special when writing code in Crashpad. It’s easier
to grep for and it’s easier to remove the “compat” part when pre-C++11
libraries are no longer relevant.
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1513573005 .
This unifies several things that used a 16-character random string, and
a few other users of random identifiers where it also made sense to use
a 16-character random string.
TEST=crashpad_util_test RandomString.RandomString
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1451793002 .
This consolidates all of the twisted casts and comments that discuss how
HANDLEs are really only 32 bits wide even in 64-bit processes on 64-bit
operating systems into a single location.
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1422503015 .
In https://codereview.chromium.org/1411523006, the Mach port scopers are
becoming better ScopedGenerics and are losing the type conversion
operators in the process. This is needed to adapt to that change. get()
is ugly, but being explicit about conversion isn’t a bad thing, and
these scopers will gain functionality such as Pass() as part of the
switch.
As a bonus, some would-be uses of get() to check for valid port rights
are becoming a more descriptive is_valid().
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1405273002 .
This wraps bootstrap_check_in() in BootstrapCheckIn(), and
bootstrap_look_up() in BootstrapLookUp(). The wrappers make it more
difficult to accidentally leak a returned right. They’re easier to use,
encapsulating common error checking and logging, simplifying all call
sites.
TEST=crashpad_util_test MachExtensions.BootstrapCheckInAndLookUp
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1383283003 .
A few function implementations that were missing, various switches
for functions/functionality that didn't exist on XP, and far too long
figuring out what exactly was wrong with SYSTEM_PROCESS_INFORMATION
on x86 (the "alignment_for_x86" fields).
R=mark@chromium.org
BUG=crashpad:1, crashpad:50, chromium:531663
Review URL: https://codereview.chromium.org/1336823002 .
Now that we have a multiprocess test harness, add a test for
ProcessReaderWin for reading from a child.
Parent test code wasn't closing handles properly; fix that.
R=rsesek@chromium.org
BUG=crashpad:1
Review URL: https://codereview.chromium.org/1160843006
After 9e79ea1da719, it no longer makes sense for crashpad_util_test_lib
to “hide” in util/util_test.gyp. All of util/test is moved to its own
top-level directory, test, which all other test code is allowed to
depend on. test, too, is allowed to depend on all other non-test code.
In a future change, when crashpad_util_test_lib gains a dependency on
crashpad_client, it won’t look so weird for something in util (even
though it’s in util/test) to depend on something in client, because the
thing that needs to depend on client will live in test, not util.
BUG=crashpad:33
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1051533002
