Previously, StartHandler() launched the handler process, then connected
over a pipe to register for crash handling. Instead, the initial client
can create and inherit handles to the handler and pass those handle
values and other data (addresses, etc.) on the command line.
This should improve startup time as there's no need to synchronize with
the process at startup, and allows avoiding a call to CreateProcess()
directly in StartHandler(), which is important for registration for
crash reporting from DllMain().
Incidentally adds new utility functions for string/number conversion and
string splitting.
Note: API change; UseHandler() is removed for all platforms.
BUG=chromium:567850,chromium:656800
Change-Id: I1602724183cb107f805f109674c53e95841b24fd
Reviewed-on: https://chromium-review.googlesource.com/400015
Reviewed-by: Mark Mentovai <mark@chromium.org>
This was done in Chromium’s local copy of Crashpad in 562827afb599. This
change is similar to that one, except more care was taken to avoid
including headers from a .cc or _test.cc when already included by the
associated .h. Rather than using <stddef.h> for size_t, Crashpad has
always used <sys/types.h>, so that’s used here as well.
This updates mini_chromium to 8a2363f486e3a0dc562a68884832d06d28d38dcc,
which removes base/basictypes.h.
e128dcf10122 Remove base/move.h; use std::move() instead of Pass()
8a2363f486e3 Move basictypes.h to macros.h
R=avi@chromium.org
Review URL: https://codereview.chromium.org/1566713002 .
In https://codereview.chromium.org/1411523006, the Mach port scopers are
becoming better ScopedGenerics and are losing the type conversion
operators in the process. This is needed to adapt to that change. get()
is ugly, but being explicit about conversion isn’t a bad thing, and
these scopers will gain functionality such as Pass() as part of the
switch.
As a bonus, some would-be uses of get() to check for valid port rights
are becoming a more descriptive is_valid().
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1405273002 .
ExceptionPorts::GetExceptionPorts() returned a
std::vector<ExceptionPorts::ExceptionHandler>, which contained send
rights to Mach ports. The interface required callers to assume ownership
of each send right contained within the vector. This was cumbersome and
error-prone, and despite the care taken in Crashpad, port right leaks
did occur:
- SimulateCrash() didn’t make any attempt to release these resources at
all.
- Neither did crashpad_util_test ExceptionPorts.HostExceptionPorts,
which also reused a vector.
This replaces the vector with the interface-compatible (as far as
necessary) ExceptionPorts::ExceptionHandlerVector, which deallocates
collected port rights on destruction or clear().
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1381023007 .
This wraps bootstrap_check_in() in BootstrapCheckIn(), and
bootstrap_look_up() in BootstrapLookUp(). The wrappers make it more
difficult to accidentally leak a returned right. They’re easier to use,
encapsulating common error checking and logging, simplifying all call
sites.
TEST=crashpad_util_test MachExtensions.BootstrapCheckInAndLookUp
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1383283003 .
CrashReportExceptionHandler::CatchMachException() must always set a
valid new_state. Failing to do so appears to trigger corpse generation
on OS X 10.11. This is addressed by calling ExcServerCopyState().
Previously, this was not done for exceptions forwarded to the user
ReportCrash, under the apparent mistaken assumption that ReportCrash
would do it. However, ReportCrash is given copies of out-parameters like
new_state to explicitly prevent it from influencing Crashpad’s returned
state.
ExcServerSuccessfulReturnValue() must not return MACH_RCV_PORT_DIED for
an EXC_CRASH handler on OS X 10.11. This appears to trigger corpse
generation. This is addressed by always returning KERN_SUCCESS from
EXC_CRASH handlers on OS X 10.11.
This also adds generic EXC_CORPSE_NOTIFY support throughout Crashpad.
The crashpad_handler does not listen for this exception type, but it is
now possible to work with this exception type using tools like
exception_port_tool and catch_exception_tool.
BUG=crashpad:48
TEST=Crashes handled by crashpad_handler do not result in the generation
of reports in the root /Library/Logs/DiagnosticReports.
R=kerrnel@chromium.org, rsesek@chromium.org
Review URL: https://codereview.chromium.org/1305893010 .
This adds IsExceptionNonfatalResource() and its test, and uses it in
crashpad_handler. When non-fatal resource exceptions are encountered, no
crash report is generated. crashpad_handler swallows these exceptions.
Alternatively, it could allow them to be sent to the system’s host-level
resource exception handler, normally com.apple.ReportCrash.root, which
would allow them to be processed in the same way as when Crashpad is not
in use. I’m not sure which option is better. I chose to swallow them
because there doesn’t appear to be much value in letting
com.apple.ReportCrash.root and spindump look at them.
This also moves ExcCrashRecoverOriginalException() to the new file as a
sibling of IsExceptionNonfatalResource(). This provides better
organization.
BUG=crashpad:35, chromium:474163, chromium:474326
TEST=crashpad_util_test ExceptionTypes.IsExceptionNonfatalResource
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1066243002
The wiki existed at https://code.google.com/p/crashpad/wiki, but given
Google Code Project Hosting’s impending shutdown[1], it’s prudent to
move wiki documents into the source code repository.
This change moves the existing contents of doc into doc/support, to make
way for documentation in doc. The two existing wiki pages, ProjectStatus
and DevelopingCrashpad, are converted to AsciiDoc format (a fairly
straightforward conversion) and checked in to doc. generate_asciidoc.sh
is updated to produce HTML output from these files. The generated HTML
will show up at http://docs.crashpad.googlecode.com/git/doc/. Note that
generated HTML is still hosted on Google Code Project Hosting, but it’ll
be easy to find a new home for them.
[1]
http://google-opensource.blogspot.com/2015/03/farewell-to-google-code.htmlR=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1055523002
ExcServerCopyState() properly sets the new_state and new_state_count
out-parameters for exception handler routines that may deal with
state-carrying exceptions.
This used to exist inline in catch_exception_tool, but that
implementation had a bug caught by the new test.
TEST=crashpad_util_test ExcServerVariants.ExcServerCopyState and others
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1049023003
Add MapInsertOrReplace<>() to insert a key-value pair into a map if the
key is not already present, or replace the existing value for key if the
key is present. The original value can optionally be returned to the
caller in this case.
Map insertions now use either MapInsertOrReplace<>() or
std::map<>::insert() directly.
Use MapInsertOrReplace<>() when the map should be updated to contain a
mapping from a key to a value regardless of whether the key is already
present.
Use std::map<>::insert() to insert a mapping from a key to a value
without replacing any existing mapping from a key, if present. If it is
important to know whether an existing mapping from a key was present,
use the returned std::pair<>.second. If it is important to know the
existing value, use the returned std::pair<>.first->second.
This change has a slight positive impact on performance.
TEST=crashpad_util_test MapInsert.MapInsertOrReplace and others
BUG=
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1044273002
This makes it easier for clients to start the Crashpad handler, instead
of requiring them to know how to construct arguments for the handler
themselves. Note in the TEST that -a is no longer required.
TEST=run_with_crashpad --handler crashpad_handler \
--database=/tmp/crashpad_db \
--url=https://clients2.google.com/cr/staging_report \
--annotation=prod=crashpad \
--annotation=ver=0.7.0 \
crashy_program
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1001993002
This adds an Info.plist to these two tools that use task_for_pid().
Since they’re flat unbundled executables, the Info.plist must be placed
as a __TEXT,__info_plist section.
By setting SecTaskAccess to allowed and signing these tools with a
certificate trusted by the system, they will be allowed to use
task_for_pid() without requiring the invoking user to be root. This
provides an alternative to installing these tools as setuid root.
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/822533002
run_with_crashpad runs a program with a Crashpad exception handler. It
allows a Crashpad exception-handling server to be started and to direct
crashes to it from programs that are not themselves clients of the
Crashpad client library.
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/810423004
