Partial implementation: Currently only handles http (i.e. no TLS), only
POST, and only certain response types (only when Content-Length is
specified, and not chunked). Used for Linux and Fuchsia lacking anything
better (that's shippable). Removes libcurl HTTPTransport, since it isn't
available in the Chromium sysroot anyway.
This is an intermediate step until BoringSSL is available in the Fuchsia
SDK. Once that's available, it should be "relatively straightfoward" to
make http_transport_socket.cc secure its socket using BoringSSL or
OpenSSL depending on the platform.
Bug: crashpad:196, crashpad:227, crashpad:30
Change-Id: If33a0d3f11b9000cbc3f52f96cd024ef274a922f
Reviewed-on: https://chromium-review.googlesource.com/1022717
Commit-Queue: Scott Graham <scottmg@chromium.org>
Reviewed-by: Joshua Peraza <jperaza@chromium.org>
1. Prefix enable_http_transport_libcurl with crashpad for use in
chromium .gn files.
2. Make tools build on Android using http_transport_none.cc
Bug: crashpad:30
Change-Id: I0a9878fe9f5b8fbc13a52f93df273fb1de8160f3
Reviewed-on: https://chromium-review.googlesource.com/984038
Reviewed-by: Mark Mentovai <mark@chromium.org>
CrashpadClient will need ScopedPrSetPtracer when launching a handler
process in response to a crash.
Bug: crashpad:30
Change-Id: I35bc784b948349ca771f9cd65ef1089e626976bb
Reviewed-on: https://chromium-review.googlesource.com/927352
Reviewed-by: Mark Mentovai <mark@chromium.org>
Commit-Queue: Joshua Peraza <jperaza@chromium.org>
Embeds the address of g_crashpad_info into a .note section (which is
readable by the generic code to read notes in ElfImageReader).
Unfortunately because the note section is in libclient.a, it would
normally be dropped at link time. To avoid that, GetCrashpadInfo() has
a reference *back* to that section, which in turn forces the linker to
include it, allowing the note reader to find it at runtime.
Previously, it was necessary to have the embedder of "client" figure out
how to cause `g_crashpad_info` to appear in the final module's dynamic
symbol table. With this new approach, there's no manual configuration
necessary, as it's not necessary for the symbol to be exported.
This is currently only implemented in the Linux module reader (and I
believe the current set of enabled tests aren't exercising it?) but it
will also be done this way for the Fuchsia implementation of
ModuleSnapshot.
Bug: crashpad:196
Change-Id: I599db5903bc98303130d11ad850ba9ceed3b801a
Reviewed-on: https://chromium-review.googlesource.com/912284
Commit-Queue: Scott Graham <scottmg@chromium.org>
Reviewed-by: Mark Mentovai <mark@chromium.org>
Reviewed-by: Joshua Peraza <jperaza@chromium.org>
Previously, the mac version was under client/ and win under util/win/.
This cl brings them all together under util/misc/ and combines common
test code.
Bug: crashpad:30
Change-Id: Idf0d0158b969d5aa9802dfc8c21f73041b2bcc6c
Reviewed-on: https://chromium-review.googlesource.com/907755
Reviewed-by: Mark Mentovai <mark@chromium.org>
Commit-Queue: Joshua Peraza <jperaza@chromium.org>
(Still need to avoid fork()-dependence for the non-self tests.)
Bug: crashpad:196
Change-Id: Ib34fe33c7ec295881c1f555995072d9ff742647f
Reviewed-on: https://chromium-review.googlesource.com/876650
Reviewed-by: Joshua Peraza <jperaza@chromium.org>
Reviewed-by: Mark Mentovai <mark@chromium.org>
Commit-Queue: Scott Graham <scottmg@chromium.org>
A PtraceBroker/Client pair implement a PtraceConnection over a socket.
The broker runs in a process with `ptrace` capabilities for the target
process and serves requests for the client over a socket.
Bug: crashpad:30
Change-Id: Ied19bcedf84b46c8f68440fd1c284b2126470e5e
Reviewed-on: https://chromium-review.googlesource.com/780397
Commit-Queue: Joshua Peraza <jperaza@chromium.org>
Reviewed-by: Mark Mentovai <mark@chromium.org>
Crashpad has many tests that crash intentionally. Some of these are
gtest death tests, and others arrange for intentional crashes to test
Crashpad’s own crash-catching logic. On macOS, all of the gtest death
tests and some of the other intentional crashes were being logged by
ReportCrash, the system’s crash reporter. Since these reports
corresponded to intentional crashes, they were never useful, and served
only to clutter ~/Library/Logs/DiagnosticReports.
Since Crashpad is adept at handling exceptions on its own, this
introduces the “exception swallowing server”,
crashpad_exception_swallower, which is a Mach exception server that
implements a no-op exception handler routine for all exceptions
received. The exception swallowing server is established as the task
handler for EXC_CRASH and EXC_CORPSE_NOTIFY exceptions during gtest
death tests invoked by {ASSERT,EXPECT}_DEATH_{CHECK,CRASH}, and for all
child processes invoked by the Multiprocess test infrastructure. The
exception swallowing server is not in effect at other times, so
unexpected crashes in test code can still be handled by ReportCrash or
another crash reporter.
With this change in place, no new reports are generated in the
user-level ~/Library/Logs/DiagnosticReports or the system’s
/Library/Logs/DiagnosticReports during a run of Crashpad’s full test
suite on macOS.
Bug: crashpad:33
Change-Id: I13891853a7e25accc30da21fa7ea8bd7d1f3bd2f
Reviewed-on: https://chromium-review.googlesource.com/777859
Commit-Queue: Mark Mentovai <mark@chromium.org>
Reviewed-by: Robert Sesek <rsesek@chromium.org>
crashpad_snapshot_test PEImageReader.DebugDirectory was hanging when
crashpad_snapshot_test_image_reader.exe did not have a CodeView PDB
link. This occurred when linked by Lexan ld-link.exe without /DEBUG.
Bug: chromium:782781
Change-Id: I8fbc4d8decf6ac5e19f7ffeb230fd15d7c40fd51
Reviewed-on: https://chromium-review.googlesource.com/761320
Reviewed-by: Leonard Mosescu <mosescu@chromium.org>
This CL pulls together similar time conversion functions and adds
conversions between `FILETIME`s and `timespec`s.
Bug: crashpad:206
Change-Id: I1d9b1560884ffde2364af0092114f82e1534ad1c
Reviewed-on: https://chromium-review.googlesource.com/752574
Commit-Queue: Joshua Peraza <jperaza@chromium.org>
Reviewed-by: Mark Mentovai <mark@chromium.org>
This reverts 55133d332b6c and adds a broken dummy SafeTerminateProcess()
for cross builds instead. It’s similar to 2f4516f93838, which was for
CaptureContext().
This upstreams
af5f31ed61
(slightly modified).
The dummy implementation in the “broken” file affords no protection
against third-party code patching TerminateProcess() badly. The “broken”
file is not used by Crashpad anywhere at all, and is only used by
Crashpad in Chromium during a cross build targeting Windows without the
benefit of Microsoft’s ml.exe assembler. Strictly speaking, this file
does not need to be checked in to the Crashpad repository, but since
Chromium needs it to unblock its not-production-ready cross build for
Windows, it’s being landed here to avoid Chromium’s copy of Crashpad
appearing as modified or “dirty” relative to this upstream copy.
Bug: chromium:762167, chromium:777924
Change-Id: Iba68c0cab142fbe9541ea254a9a856b8263e4c70
Reviewed-on: https://chromium-review.googlesource.com/735078
Reviewed-by: Mark Mentovai <mark@chromium.org>
This change also adds functions to create directories, remove files and
directories, and check for the existence of files and directories.
Change-Id: I62b78219ae2b277d6976d2d90ec86fcabd0ef073
Reviewed-on: https://chromium-review.googlesource.com/696132
Commit-Queue: Joshua Peraza <jperaza@chromium.org>
Reviewed-by: Mark Mentovai <mark@chromium.org>
Only a Linux implementation for now, but similar code for other
OSes can move behind it in the future.
Bug: crashpad:196
Change-Id: I05966db1599a9cac3146d2a3d964e7ad8629d616
Reviewed-on: https://chromium-review.googlesource.com/685408
Reviewed-by: Mark Mentovai <mark@chromium.org>
Commit-Queue: Dave Bort <dbort@google.com>
A step towards making these files usable by non-Linux systems.
Bug: crashpad:196
Change-Id: I71323b29e46208b3992055722e4622d79409c44c
Reviewed-on: https://chromium-review.googlesource.com/685406
Commit-Queue: Dave Bort <dbort@google.com>
Reviewed-by: Mark Mentovai <mark@chromium.org>
During crash report upload, the client now provides the product
name, version, and client id via URL parameters to the crash
reporting service.
Also added percent-encoding function and a test.
Change-Id: I62f3a646d4ab6029543bd80938b79de28b1f20e4
Test: crashpad_util_test URLEncode.Empty
Test: crashpad_util_test URLEncode.ReservedCharacters
Test: crashpad_util_test URLEncode.UnreservedCharacters
Test: crashpad_util_test URLEncode.SimpleAddress
Reviewed-on: https://chromium-review.googlesource.com/493917
Commit-Queue: Roman Margold <rmargold@chromium.org>
Reviewed-by: Mark Mentovai <mark@chromium.org>
This will allow sharing code that is currently hard-coded to use (e.g.)
LinuxVMAddress or mach_vm_size_t.
Change-Id: I7bf20600c73d4ec7d2a029754f9043a236a38e5a
Reviewed-on: https://chromium-review.googlesource.com/677142
Reviewed-by: Mark Mentovai <mark@chromium.org>
Commit-Queue: Dave Bort <dbort@google.com>
1) Add PtraceConnection which serves as the base class for specific
types of connections Crashpad uses to trace processes.
2) Add DirectPtraceConnection which is used when the handler process
has `ptrace` capabilities for the target process.
3) Move `ptrace` logic into Ptracer. This class isolates `ptrace` call
logic for use by various PtraceConnection implementations.
Bug: crashpad:30
Change-Id: I98083134a9f7d9f085e4cc816d2b85ffd6d73162
Reviewed-on: https://chromium-review.googlesource.com/671659
Commit-Queue: Joshua Peraza <jperaza@chromium.org>
Reviewed-by: Mark Mentovai <mark@chromium.org>
Reviewed-by: Leonard Mosescu <mosescu@chromium.org>
This is essentially based on a search for “^const .*=”.
Change-Id: I9332c1f0cf7c891ba1ae373dc537f700f9a1d956
Reviewed-on: https://chromium-review.googlesource.com/585452
Reviewed-by: Leonard Mosescu <mosescu@chromium.org>
Crashpad doesn’t use AVX-512, but when receiving replies to exceptions
forwarded to ReportCrash, may see buffers large enough to contain
AVX-512 thread state. This can result in messages like
“UniversalExceptionRaise: (ipc/rcv) msg too large (0x10004004)”.
I386_THREAD_STATE_MAX has increased from 224 to 614 in the 10.13 SDK,
meaning that the maximum supported size for old_state and new_state in
[mach_]exception_raise_state[_identity]() has increased from 896 to
2,456 bytes. This constant defines the size of the buffer that these
MIG-generated routines will work with. By providing this definition in
compat, the buffer size is increased when building with older SDKs.
Note that on the “send” side, the size of the message given to
mach_msg() will be trimmed to include only the valid part of the state
area based on the stateCnt field, so increasing the value to 614 here
won’t result Crashpad sending messages this large. That would be a
potential interoperability concern with older OS versions.
Bug: crashpad:185, crashpad:190
Change-Id: Ia46091ae46fd6227a17f59eb4bc00914be471aa7
Reviewed-on: https://chromium-review.googlesource.com/541515
Reviewed-by: Robert Sesek <rsesek@chromium.org>
This renames and improves the VariableSizeBitCast helper from
util/linux/auxiliary_vector.* and moves it to misc.
Change-Id: I4bf46f4cfc0e60c900ff9bde467a21ad43c684cd
Reviewed-on: https://chromium-review.googlesource.com/534174
Commit-Queue: Joshua Peraza <jperaza@chromium.org>
Reviewed-by: Mark Mentovai <mark@chromium.org>
ThreadInfo provides a uniform interface to collect register sets or
the thread-local storage address across bitness for x86 and ARM family
architectures. Additionally, ThreadInfo.h defines context structs which
mirror those provided in sys/user.h. This allows tracing across bitness
as the structs in sys/user.h are only provided for a single target
architecture.
Bug: crashpad:30
Change-Id: I91d0d788927bdac5fb630a6ad3c6ea6d3645ef8a
Reviewed-on: https://chromium-review.googlesource.com/494075
Commit-Queue: Joshua Peraza <jperaza@chromium.org>
Reviewed-by: Mark Mentovai <mark@chromium.org>
Some of the new Linux/Android tests were failing in 32-bit code where
pointers were being casted via reinterpret_cast<>() to LinuxVMAddress,
an unsigned 64-bit type. The behavior of such casts is
implementation-defined, and in this case, sign-extension was being used
to convert the 32-bit pointers to 64 bits, resulting in very large
(unsigned) LinuxVMAddress values that could not possibly refer to proper
addresses in a 32-bit process’ address space.
The offending reinterpret_cast<>() conversions have been replaced with
the new FromPointerCast<>(), which is careful to do sign-extension when
converting to a signed type, and zero-extension when converting to an
unsigned type like LinuxVMAddress.
Bug: crashpad:30
Test: crashpad_util_test FromPointerCast*:MemoryMap.*:ProcessMemory.*
Change-Id: I6f1408dc63369a8740ecd6015d657e4407a7c271
Reviewed-on: https://chromium-review.googlesource.com/488264
Reviewed-by: Joshua Peraza <jperaza@chromium.org>
TerminateProcess(), like most of the Windows API, is declared WINAPI,
which is __stdcall on 32-bit x86. That means that the callee,
TerminateProcess() itself, is responsible for cleaning up parameters on
the stack on return. In https://crashpad.chromium.org/bug/179, crashes
in ExceptionHandlerServer::OnNonCrashDumpEvent() were observed in ways
that make it evident that TerminateProcess() has been patched with a
__cdecl routine. The crucial difference between __stdcall and __cdecl is
that the caller is responsible for stack parameter cleanup in __cdecl.
The mismatch means that nobody cleans parameters from the stack, and the
stack pointer has an unexpected value, which in the case of the Crashpad
handler crash, results in TerminateProcess()’s second argument
erroneously being used as the lock address in the call to
ReleaseSRWLockExclusive() or LeaveCriticalSection().
As a workaround, on 32-bit x86, call through SafeTerminateProcess(), a
custom assembly routine that’s compatible with either __stdcall or
__cdecl implementations of TerminateProcess() by not trusting the value
of the stack pointer on return from that function. Instead, the stack
pointer is restored directly from the frame pointer.
Bug: crashpad:179
Test: crashpad_util_test SafeTerminateProcess.*, others
Change-Id: If9508f4eb7631020ea69ddbbe4a22eb335cdb325
Reviewed-on: https://chromium-review.googlesource.com/481180
Reviewed-by: Scott Graham <scottmg@chromium.org>
76a67a37b1d0 adds crashpad_handler’s --monitor-self argument, which
results in a second crashpad_handler instance running out of the same
database as the initial crashpad_handler instance that it monitors. The
two handlers start at nearly the same time, and will initially be on
precisely the same schedule for periodic tasks such as scanning for new
reports to upload and pruning the database. This is an unnecessary
duplication of effort.
This adds a new --no-periodic-tasks argument to crashpad_handler. When
the first instance of crashpad_handler starts a second to monitor it, it
will use this argument, which prevents the second instance from
performing these tasks.
When --no-periodic-tasks is in effect, crashpad_handler will still be
able to upload crash reports that it knows about by virtue of having
written them itself, but it will not scan the database for other pending
reports to upload.
Bug: crashpad:143
Test: crashpad_util_test ThreadSafeVector.ThreadSafeVector
Change-Id: I7b249dd7b6d5782448d8071855818f986b98ab5a
Reviewed-on: https://chromium-review.googlesource.com/473827
Reviewed-by: Robert Sesek <rsesek@chromium.org>
Provides Read, ReadCString, and ReadCStringSizeLimited. Does not provide
ReadMapped because Linux does not support mmap on /proc/pid/mem.
Bug: crashpad:30
Change-Id: Ia319c0107b1f138aeb8e5d0ee480c77310df7202
Reviewed-on: https://chromium-review.googlesource.com/459700
Reviewed-by: Mark Mentovai <mark@chromium.org>
Commit-Queue: Joshua Peraza <jperaza@chromium.org>
This supports the “double handler” or “double handler with low
probability” models from https://crashpad.chromium.org/bug/143.
For crashpad_handler to be become its own client, it needs access to its
own executable path to pass to CrashpadClient::StartHandler(). This was
formerly available in the test-only test::Paths::Executable(). Bring
that function’s implementation to the non-test Paths::Executable() in
util/misc, and rename test::Paths to test::TestPaths to avoid future
confusion.
test::TestPaths must still be used to access TestDataRoot(), which does
not make any sense to non-test code.
test::TestPaths::Executable() is retained for use by tests, which most
likely prefer the fatal semantics of that function. Paths::Executable()
is not fatal because for the purposes of implementing the double
handler, a failure to locate the executable path (which may happen on
some systems in deeply-nested directory hierarchies) shouldn’t cause the
initial crashpad_handler to abort, even if it does prevent a second
crashpad_handler from being started.
Bug: crashpad:143
Test: crashpad_util_test Paths.*, crashpad_test_test TestPaths.*
Change-Id: I9f75bf61839ce51e33c9f7c0d7031cebead6a156
Reviewed-on: https://chromium-review.googlesource.com/466346
Reviewed-by: Scott Graham <scottmg@chromium.org>
Commit-Queue: Mark Mentovai <mark@chromium.org>
This implements a non-stdio-based getline() equivalent. getline() is not
in the Android NDK until API 21 (Android 5.0.0), while Chrome builds for
32-bit platforms with API 16 (Android 4.1.0). Although a getline()
declaration could be provided in compat for use with older NDK headers,
it’s desirable to move away from stdio entirely. The C++
DelimitedFileReader interface is also a bit more comfortable to use than
getline().
A getdelim() equivalent is also provided, and is also used in the
Linux/Android ProcessInfo implementation.
Bug: crashpad:30
Test: crashpad_util_test FileLineReader.*:ProcessInfo.*
Change-Id: Ic1664758a87cfe4953ab22bd3ae190761404b22c
Reviewed-on: https://chromium-review.googlesource.com/455998
Reviewed-by: Joshua Peraza <jperaza@chromium.org>
Commit-Queue: Mark Mentovai <mark@chromium.org>
crashpad_util should already have been the target to depend on
version.lib, but this wasn’t caught until something that depends on
crashpad_util but not crashpad_snapshot used that code, as
crashpad_util_test now does.
Change-Id: I1b7ced72c657946b297a328c0f89f51190d7d708
Reviewed-on: https://chromium-review.googlesource.com/448203
Reviewed-by: Scott Graham <scottmg@chromium.org>
Use these utilities for signal handling in crashpad_handler
BUG=crashpad:30
TEST=crashpad_util_test Signals.*
Change-Id: I6c9a1de35c4a81b58d77768c4753bdba5ebea4df
Reviewed-on: https://chromium-review.googlesource.com/446917
Commit-Queue: Mark Mentovai <mark@chromium.org>
Reviewed-by: Robert Sesek <rsesek@chromium.org>
It could be useful to put our existing Crashpad.HandlerCrashed metrics
into context by getting a sense of handler starts, clean exits, and
other types of exits.
BUG=crashpad:100
Change-Id: I8982075158ea6d210eb2ddad678302e339a42192
Reviewed-on: https://chromium-review.googlesource.com/444124
Reviewed-by: Scott Graham <scottmg@chromium.org>
