crashpad/test/multiprocess_posix.cc

224 lines
6.1 KiB
C++
Raw Normal View History

// Copyright 2014 The Crashpad Authors. All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "test/multiprocess.h"
#include <signal.h>
#include <stdlib.h>
#include <sys/wait.h>
#include <unistd.h>
#include <memory>
#include <string>
#include "base/auto_reset.h"
#include "base/files/scoped_file.h"
#include "base/logging.h"
#include "base/posix/eintr_wrapper.h"
#include "base/strings/stringprintf.h"
#include "gtest/gtest.h"
#include "test/errors.h"
#include "util/misc/scoped_forbid_return.h"
namespace crashpad {
namespace test {
namespace internal {
struct MultiprocessInfo {
MultiprocessInfo()
: pipe_c2p_read(-1),
pipe_c2p_write(-1),
pipe_p2c_read(-1),
pipe_p2c_write(-1),
child_pid(0) {}
base::ScopedFD pipe_c2p_read; // child to parent
base::ScopedFD pipe_c2p_write; // child to parent
base::ScopedFD pipe_p2c_read; // parent to child
base::ScopedFD pipe_p2c_write; // parent to child
pid_t child_pid; // valid only in parent
};
} // namespace internal
Multiprocess::Multiprocess()
: info_(nullptr),
code_(EXIT_SUCCESS),
reason_(kTerminationNormal) {
}
void Multiprocess::Run() {
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(info_, nullptr);
std::unique_ptr<internal::MultiprocessInfo> info(
new internal::MultiprocessInfo);
base::AutoReset<internal::MultiprocessInfo*> reset_info(&info_, info.get());
ASSERT_NO_FATAL_FAILURE(PreFork());
pid_t pid = fork();
ASSERT_GE(pid, 0) << ErrnoMessage("fork");
if (pid > 0) {
info_->child_pid = pid;
RunParent();
// Waiting for the child happens here instead of in RunParent() because even
// if RunParent() returns early due to a gtest fatal assertion failure, the
// child should still be reaped.
// This will make the parent hang up on the child as much as would be
// visible from the childs perspective. The childs side of the pipe will
// be broken, the childs remote port will become a dead name, and an
// attempt by the child to look up the service will fail. If this werent
// done, the child might hang while waiting for a parent that has already
// triggered a fatal assertion failure to do something.
info.reset();
info_ = nullptr;
int status;
pid_t wait_pid = HANDLE_EINTR(waitpid(pid, &status, 0));
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(wait_pid, pid) << ErrnoMessage("waitpid");
TerminationReason reason;
int code;
std::string message;
if (WIFEXITED(status)) {
reason = kTerminationNormal;
code = WEXITSTATUS(status);
message = base::StringPrintf("Child exited with code %d", code);
} else if (WIFSIGNALED(status)) {
reason = kTerminationSignal;
code = WTERMSIG(status);
message =
base::StringPrintf("Child terminated by signal %d (%s)%s",
code,
strsignal(code),
WCOREDUMP(status) ? " (core dumped)" : "");
} else {
FAIL() << "Unknown termination reason";
}
if (reason_ == kTerminationNormal) {
message += base::StringPrintf(", expected exit with code %d", code_);
} else if (reason_ == kTerminationSignal) {
message += base::StringPrintf(", expected termination by signal %d (%s)",
code_,
strsignal(code_));
}
if (reason != reason_ || code != code_) {
ADD_FAILURE() << message;
}
} else {
RunChild();
}
}
void Multiprocess::SetExpectedChildTermination(TerminationReason reason,
int code) {
reason_ = reason;
code_ = code;
}
Multiprocess::~Multiprocess() {
}
void Multiprocess::PreFork() {
int pipe_fds_c2p[2];
int rv = pipe(pipe_fds_c2p);
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(rv, 0) << ErrnoMessage("pipe");
info_->pipe_c2p_read.reset(pipe_fds_c2p[0]);
info_->pipe_c2p_write.reset(pipe_fds_c2p[1]);
int pipe_fds_p2c[2];
rv = pipe(pipe_fds_p2c);
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(rv, 0) << ErrnoMessage("pipe");
info_->pipe_p2c_read.reset(pipe_fds_p2c[0]);
info_->pipe_p2c_write.reset(pipe_fds_p2c[1]);
}
pid_t Multiprocess::ChildPID() const {
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_NE(info_->child_pid, 0);
return info_->child_pid;
}
FileHandle Multiprocess::ReadPipeHandle() const {
int fd = info_->child_pid ? info_->pipe_c2p_read.get()
: info_->pipe_p2c_read.get();
CHECK_NE(fd, -1);
return fd;
}
FileHandle Multiprocess::WritePipeHandle() const {
int fd = info_->child_pid ? info_->pipe_p2c_write.get()
: info_->pipe_c2p_write.get();
CHECK_NE(fd, -1);
return fd;
}
void Multiprocess::CloseReadPipe() {
if (info_->child_pid) {
info_->pipe_c2p_read.reset();
} else {
info_->pipe_p2c_read.reset();
}
}
void Multiprocess::CloseWritePipe() {
if (info_->child_pid) {
info_->pipe_p2c_write.reset();
} else {
info_->pipe_c2p_write.reset();
}
}
void Multiprocess::RunParent() {
// The parent uses the read end of c2p and the write end of p2c.
info_->pipe_c2p_write.reset();
info_->pipe_p2c_read.reset();
MultiprocessParent();
info_->pipe_c2p_read.reset();
info_->pipe_p2c_write.reset();
}
void Multiprocess::RunChild() {
ScopedForbidReturn forbid_return;
// The child uses the write end of c2p and the read end of p2c.
info_->pipe_c2p_read.reset();
info_->pipe_p2c_write.reset();
MultiprocessChild();
info_->pipe_c2p_write.reset();
info_->pipe_p2c_read.reset();
if (testing::Test::HasFailure()) {
// Trigger the ScopedForbidReturn destructor.
return;
}
// In a forked child, exit() is unsafe. Use _exit() instead.
_exit(EXIT_SUCCESS);
}
} // namespace test
} // namespace crashpad