crashpad/util/file/delimited_file_reader_test.cc

366 lines
13 KiB
C++
Raw Permalink Normal View History

// Copyright 2017 The Crashpad Authors. All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "util/file/delimited_file_reader.h"
#include <vector>
#include "base/format_macros.h"
#include "base/stl_util.h"
#include "base/strings/stringprintf.h"
#include "gtest/gtest.h"
#include "util/file/string_file.h"
namespace crashpad {
namespace test {
namespace {
TEST(DelimitedFileReader, EmptyFile) {
StringFile string_file;
DelimitedFileReader delimited_file_reader(&string_file);
std::string line;
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
// The file is still at EOF.
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
}
TEST(DelimitedFileReader, EmptyOneLineFile) {
StringFile string_file;
string_file.SetString("\n");
DelimitedFileReader delimited_file_reader(&string_file);
std::string line;
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, string_file.string());
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
// The file is still at EOF.
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
}
TEST(DelimitedFileReader, SmallOneLineFile) {
StringFile string_file;
string_file.SetString("one line\n");
DelimitedFileReader delimited_file_reader(&string_file);
std::string line;
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, string_file.string());
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
// The file is still at EOF.
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
}
TEST(DelimitedFileReader, SmallOneLineFileWithoutNewline) {
StringFile string_file;
string_file.SetString("no newline");
DelimitedFileReader delimited_file_reader(&string_file);
std::string line;
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, string_file.string());
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
// The file is still at EOF.
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
}
TEST(DelimitedFileReader, SmallMultiLineFile) {
StringFile string_file;
string_file.SetString("first\nsecond line\n3rd\n");
DelimitedFileReader delimited_file_reader(&string_file);
std::string line;
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, "first\n");
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, "second line\n");
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, "3rd\n");
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
// The file is still at EOF.
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
}
TEST(DelimitedFileReader, SmallMultiFieldFile) {
StringFile string_file;
string_file.SetString("first,second field\ntwo lines,3rd,");
DelimitedFileReader delimited_file_reader(&string_file);
std::string field;
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(delimited_file_reader.GetDelim(',', &field),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(field, "first,");
ASSERT_EQ(delimited_file_reader.GetDelim(',', &field),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(field, "second field\ntwo lines,");
ASSERT_EQ(delimited_file_reader.GetDelim(',', &field),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(field, "3rd,");
EXPECT_EQ(delimited_file_reader.GetDelim(',', &field),
DelimitedFileReader::Result::kEndOfFile);
// The file is still at EOF.
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetDelim(',', &field),
DelimitedFileReader::Result::kEndOfFile);
}
TEST(DelimitedFileReader, SmallMultiFieldFile_MixedDelimiters) {
StringFile string_file;
string_file.SetString("first,second, still 2nd\t3rd\nalso\tnewline\n55555$");
DelimitedFileReader delimited_file_reader(&string_file);
std::string field;
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(delimited_file_reader.GetDelim(',', &field),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(field, "first,");
ASSERT_EQ(delimited_file_reader.GetDelim('\t', &field),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(field, "second, still 2nd\t");
ASSERT_EQ(delimited_file_reader.GetLine(&field),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(field, "3rd\n");
ASSERT_EQ(delimited_file_reader.GetDelim('\n', &field),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(field, "also\tnewline\n");
ASSERT_EQ(delimited_file_reader.GetDelim('$', &field),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(field, "55555$");
EXPECT_EQ(delimited_file_reader.GetDelim('?', &field),
DelimitedFileReader::Result::kEndOfFile);
// The file is still at EOF.
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetLine(&field),
DelimitedFileReader::Result::kEndOfFile);
}
TEST(DelimitedFileReader, EmptyLineMultiLineFile) {
StringFile string_file;
string_file.SetString("first\n\n\n4444\n");
DelimitedFileReader delimited_file_reader(&string_file);
std::string line;
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, "first\n");
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, "\n");
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, "\n");
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, "4444\n");
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
// The file is still at EOF.
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
}
TEST(DelimitedFileReader, LongOneLineFile) {
std::string contents(50000, '!');
contents[1] = '?';
contents.push_back('\n');
StringFile string_file;
string_file.SetString(contents);
DelimitedFileReader delimited_file_reader(&string_file);
std::string line;
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, contents);
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
// The file is still at EOF.
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
}
void TestLongMultiLineFile(int base_length) {
std::vector<std::string> lines;
std::string contents;
for (size_t line_index = 0; line_index <= 'z' - 'a'; ++line_index) {
char c = 'a' + static_cast<char>(line_index);
// Mix up the lengths a little.
std::string line(base_length + line_index * ((line_index % 3) - 1), c);
// Mix up the data a little too.
ASSERT_LT(line_index, line.size());
line[line_index] -= ('a' - 'A');
line.push_back('\n');
contents.append(line);
lines.push_back(line);
}
StringFile string_file;
string_file.SetString(contents);
DelimitedFileReader delimited_file_reader(&string_file);
std::string line;
for (size_t line_index = 0; line_index < lines.size(); ++line_index) {
SCOPED_TRACE(base::StringPrintf("line_index %" PRIuS, line_index));
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, lines[line_index]);
}
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
// The file is still at EOF.
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
}
TEST(DelimitedFileReader, LongMultiLineFile) {
TestLongMultiLineFile(500);
}
TEST(DelimitedFileReader, ReallyLongMultiLineFile) {
TestLongMultiLineFile(5000);
}
TEST(DelimitedFileReader, EmbeddedNUL) {
static constexpr char kString[] = "embedded\0NUL\n";
StringFile string_file;
string_file.SetString(std::string(kString, base::size(kString) - 1));
DelimitedFileReader delimited_file_reader(&string_file);
std::string line;
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, string_file.string());
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
// The file is still at EOF.
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
}
TEST(DelimitedFileReader, NULDelimiter) {
static constexpr char kString[] = "aa\0b\0ccc\0";
StringFile string_file;
string_file.SetString(std::string(kString, base::size(kString) - 1));
DelimitedFileReader delimited_file_reader(&string_file);
std::string field;
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(delimited_file_reader.GetDelim('\0', &field),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(field, std::string("aa\0", 3));
ASSERT_EQ(delimited_file_reader.GetDelim('\0', &field),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(field, std::string("b\0", 2));
ASSERT_EQ(delimited_file_reader.GetDelim('\0', &field),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(field, std::string("ccc\0", 4));
EXPECT_EQ(delimited_file_reader.GetDelim('\0', &field),
DelimitedFileReader::Result::kEndOfFile);
// The file is still at EOF.
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetDelim('\0', &field),
DelimitedFileReader::Result::kEndOfFile);
}
TEST(DelimitedFileReader, EdgeCases) {
static constexpr size_t kSizes[] =
{4094, 4095, 4096, 4097, 8190, 8191, 8192, 8193};
for (size_t index = 0; index < base::size(kSizes); ++index) {
size_t size = kSizes[index];
SCOPED_TRACE(
base::StringPrintf("index %" PRIuS ", size %" PRIuS, index, size));
std::string line_0(size, '$');
line_0.push_back('\n');
StringFile string_file;
string_file.SetString(line_0);
DelimitedFileReader delimited_file_reader(&string_file);
std::string line;
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, line_0);
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
// The file is still at EOF.
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
std::string line_1(size, '@');
line_1.push_back('\n');
string_file.SetString(line_0 + line_1);
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, line_0);
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, line_1);
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
// The file is still at EOF.
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
line_1[size] = '?';
string_file.SetString(line_0 + line_1);
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, line_0);
ASSERT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kSuccess);
EXPECT_EQ(line, line_1);
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
// The file is still at EOF.
test: Use (actual, [un]expected) in gtest {ASSERT,EXPECT}_{EQ,NE} gtest used to require (expected, actual) ordering for arguments to EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify each side as “expected” or “actual.” Tests in Crashpad adhered to this traditional ordering. After a gtest change in February 2016, it is now agnostic with respect to the order of these arguments. This change mechanically updates all uses of these macros to (actual, expected) by reversing them. This provides consistency with our use of the logging CHECK_EQ and DCHECK_EQ macros, and makes for better readability by ordinary native speakers. The rough (but working!) conversion tool is https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py, and “git cl format” cleaned up its output. EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made a judgment that one side or the other needed to provide an “unexpected” value. Consequently, some code used (unexpected, actual) while other code used (actual, unexpected). For consistency with the new EXPECT_EQ and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE, this change also updates these use sites to (actual, unexpected) where one side can be called “unexpected” as, for example, std::string::npos can be. Unfortunately, this portion was a manual conversion. References: https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison https://github.com/google/googletest/commit/77d6b173380332b1c1bc540532641f410ec82d65 https://github.com/google/googletest/pull/713 Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3 Reviewed-on: https://chromium-review.googlesource.com/466727 Reviewed-by: Scott Graham <scottmg@chromium.org>
2017-04-04 00:35:21 -04:00
EXPECT_EQ(delimited_file_reader.GetLine(&line),
DelimitedFileReader::Result::kEndOfFile);
}
}
} // namespace
} // namespace test
} // namespace crashpad